journal article·2014-01

Predictions of High Strain Rate Failure Modes in Layered Aluminum Composites

Prasenjit Khanikar, M. A. Zikry

Publisher page

Abstract

A dislocation density-based crystalline plasticity formulation, specialized finite-element techniques, and rational crystallographic orientation relations were used to predict and characterize the failure modes associated with the high strain rate behavior of aluminum layered composites. Two alloy layers, a high strength alloy, aluminum 2195, and an aluminum alloy 2139, with high toughness, were modeled with representative microstructures that included precipitates, dispersed particles, and different grain boundary distributions. Different layer arrangements were investigated for high strain rate applications and the optimal arrangement was with the high toughness 2139 layer on the bottom, which provided extensive shear strain localization, and the high strength 2195 layer on the top for high strength resistance The layer thickness of the bottom high toughness layer also affected the bending behavior of the roll-bonded interface and the potential delamination of the layers. Shear strain localization, dynamic cracking, and delamination are the mutually competing failure mechanisms for the layered metallic composite, and control of these failure modes can be used to optimize behavior for high strain rate applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. R. Lesuer, C.K. Syn, O.D. Sherby, J. Wadsworth, J.J. Lewandowski, and W.H. Hunt, Jr.: Int. Mater. Rev., 1996, vol. 41 (5), pp. 169–97.10.1179/095066096790151204 ↗
2. L. Li, K. Nagai, and F. Yin: Sci. Tech. Adv. Mater., 2008, vol. 9, pp. 023001 (1–11).10.1088/1468-6996/9/2/023001 ↗
3. C.M. Cepeda-Jiménez, P. Hidalgo, M. Pozuelo, O. A. Ruano, and F. Carreño: Metall. Mater. Trans. A, 2010, vol. 41 A, pp. 61–72.10.1007/s11661-009-0069-x ↗
4. C.M. Cepeda-Jiménez, M. Pozuelo, J.M. García-Infanta, O.A. Ruano, and F. Carreño: Metall. Mater. Trans. A, 2009, vol. 40 A, pp. 69–79.10.1007/s11661-008-9679-y ↗
5. A Weck, P. Bisaillon, L. Nong, T. Meunier, H. Jin, and M. Gallerneault: Mater. Sci. Eng. A, 2011, vol. 528 (19–20), pp. 6186–93.10.1016/j.msea.2011.04.037 ↗
6. T.M. Osman, H.A. Hassan, and J.J. Lewandowski: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1993–2006.10.1007/s11661-008-9538-x ↗
7. R.L. Woodward, and S.J. Cimpoeru: Int. J. Impact Eng., 1998, vol. 21 (3), pp. 117–31.10.1016/S0734-743X(97)00034-1 ↗
8. B.A. Roeder, and C.T. Sun: Int. J. Impact Eng., 2001, vol. 25, pp. 169–85.10.1016/S0734-743X(00)00031-2 ↗
9. R. Riddle, D. Lesuer, C. Syn, R. Gogolewski, and B. Cunningham: Finite Elem. Anal. Des., 1996, vol. 23, pp. 173–92.10.1016/S0168-874X(96)80006-0 ↗
10. I.J. Polmear: Light Alloys- From Traditional Alloys to Nanocrystals, 4th ed., Elsevier, Burlington, MA, 2006, pp. 154–55.
11. H.G. Salem, W.M. Lee, L. Bodelot, G. Ravichandran, and M.A. Zikry: Metall. Mater. Trans. A, 2012, vol. 43(6), pp. 1895–901.10.1007/s11661-011-1064-6 ↗
12. W.M. Lee, and M.A. Zikry: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1215–21.10.1007/s11661-010-0476-z ↗
13. H. Yan, and J.G. Lenard: Mater. Sci. Eng. A, 2004, vol. 385, pp. 419–28.10.1016/S0921-5093(04)00906-2 ↗
14. V. Orsini, and M. Zikry: Int. J. Plast., 2001, vol. 17(10), pp. 1393–417.10.1016/S0749-6419(00)00091-7 ↗
15. M.A. Zikry, and M. Kao: J. Mech. Phys. Solids, 1996, vol. 44(11), pp. 1765–98.10.1016/0022-5096(96)00049-X ↗
16. W. Ashmawi, and M. Zikry: ASME J. Eng. Mater. Technol., 2002, vol. 124(1), pp. 88–96.10.1115/1.1421611 ↗
17. B. Peeters, M. Seefeldt, C. Teodosiu, S.R. Kalidindi, P. Van Houtte, and E. Aernoudt: Acta Mater., 2001, vol. 49(9), pp. 1607–619.10.1016/S1359-6454(01)00066-0 ↗
18. I.J. Beyerlein, and C.N. Tome: Int. J. Plast., 2008, vol. 24, pp. 867–95.10.1016/j.ijplas.2007.07.017 ↗
19. H. Mughrabi: Mater. Sci. Eng., 1987, vol. 85, pp. 15–31.10.1016/0025-5416(87)90463-0 ↗
20. P. Franciosi, A. Zaoui: Acta Metall., 1982 vol. 30(8), pp. 1627–37.10.1016/0001-6160(82)90184-5 ↗
21. T. Kameda, and M. A. Zikry: Scripta Mater., 1998, vol. 38(4), pp. 631–36.10.1016/S1359-6462(97)00512-5 ↗
22. I.J. Polmear, and R.J. Chester: Scripta Metall., 1989, vol. 23(7), pp. 1213–18.10.1016/0036-9748(89)90329-3 ↗
23. D. Vaughan: Acta Metall., 1968, vol. 16(4), pp. 563–77.10.1016/0001-6160(68)90131-4 ↗
24. H.K. Hardy, and J.M. Silcock: J. Inst. Met., 1955–56, vol. 84, pp. 423–28.
25. K. Elkhodary, L. Sun, D. Irving, D. Brenner, G. Ravichandran, and M.A. Zikry: J. Appl. Mech., 2009, vol. 76, pp. 051306-1–9.10.1115/1.3129769 ↗
26. K.M. Knowles, and W.M. Stobbs: Acta Crystallogr. B, 1988, vol. 44, pp. 207–27.10.1107/S0108768187012308 ↗
27. A. Garg, and J.M. Howe: Acta Metall. Mater., 1991, vol. 39(8), pp. 1939–46.10.1016/0956-7151(91)90162-T ↗
28. S. Ringer, and K. Hono: Mater. Charact., 2000, vol. 44(1–2), pp. 101–131.10.1016/S1044-5803(99)00051-0 ↗
29. S.C. Wang, and M.J. Starink: Int. Mater. Rev., 2005, vol. 50, pp. 193–215.10.1179/174328005X14357 ↗
30. R. Bonnet, and M. Loubradou: Phys. Status Solidi. A, 2002, vol. 194(1), pp. 173–91.10.1002/1521-396X(200211)194:1<173::AID-PSSA173>3.0.CO;2-P ↗
31. M. Ignat, and F. Durand: Scripta Metall., 1976, vol. 10(7), pp. 623–26.10.1016/0036-9748(76)90192-7 ↗
32. L.F. Mandolfo: Aluminum Alloys—Structure and Properties, 1976, Butterworth, London, UK, pp. 505–07.10.1016/B978-0-408-70932-3.50206-0 ↗
33. P.S. Chen, A.K. Kuruvilla, T.W. Malone, and W.P. Stanton: J. Mater. Eng. Perform., 1998, vol. 7(5), pp. 682–90.10.1361/105994998770347576 ↗
34. J.C. Huang, and A.J. Ardell: Mater. Sci. Technol., 1987, vol. 3, pp. 176–88.10.1179/026708387790122918 ↗
35. M.C. Chaturvedi, and D.L. Chen: Mater. Sci. Forum, 2006, vol. 519–521, pp. 147–52.10.4028/www.scientific.net/MSF.519-521.147 ↗
36. R. Cerny, J.M. Joubert, M. Latroche, A. Percheron-Guégan, and K. Yvon: J. Appl. Crystallogr., 2000, vol. 33, pp. 997–1005.10.1107/S0021889800004556 ↗
37. J.C. Huang, A.J. Ardell: J. Phys., 1987, vol. C3, pp. 373–83.
38. J.M. Howe, J. Lee, A.K. Vasudevan: Metall. Trans. A, 1988, vol. 19A, pp. 2911–920.10.1007/BF02647717 ↗
39. I.J. Plomear: Mater. Forum, 2004, vol. 28, pp. 1–14.
40. A. Deschamps, B. Decreus, F. De Geuser, T. Dorin, and M. Weyland: Acta Mater., 2013, vol. 61, pp. 4010–21.10.1016/j.actamat.2013.03.015 ↗
41. K.S. Prasad, A.A. Gokhale, A.K. Mukhopadhyay, D. Banerjee, and D.B. Goel: Acta Mater., 1999, vol. 47(8), pp. 2581–92.10.1016/S1359-6454(99)00102-0 ↗
42. K.S. Vecchio, and D.B. Williams: Acta Metall., 1987, vol. 35(12), pp. 2959–70.10.1016/0001-6160(87)90295-1 ↗
43. M.A. Zikry: Comput. Struct., 1994, vol. 50, pp. 337–50.10.1016/0045-7949(94)90004-3 ↗
44. C.L. Williams, K.T. Ramesh, and D.P. Dandekar: J. Appl. Phys., 2012, vol. 111, 123528.10.1063/1.4729305 ↗
45. M.A. Zikry, and S. Nemat-Nasser: Mech. Mater., 1990, vol. 10, pp. 215–37.10.1016/0167-6636(90)90044-G ↗
46. K.I. Elkhodary, W.M. Lee, L. Sun, D.W. Brenner, and M.A. Zikry: J. Mater. Res., 2011, vol. 26(4), pp. 487–97.10.1557/jmr.2010.29 ↗
47. L.B. Freund: Dynamic Fracture Mechanics, 1st ed., Cambridge University Press, New York, 1990, pp. 104–50.10.1017/CBO9780511546761 ↗