Surface Structure Evolution and Abnormal Wear Behavior of the TiNiNb Alloy under Impact Load
Source abstract
Abstract
The TiNiNb alloy exhibits a linear increase in wear with a number of impacts at the low impact energy density E im of 1.6 J/cm2. However, a change in the volume wear occurs on the wear curve when E im is increased to 2.42 J/cm2. In this case, when the number of impacts N is more than 3 × 105 cycles, the wear rate decreases from 5.8 × 10−6 to 1.9 × 10−6 mm3/cycle, which is only one-half of that under low E im (1.6 J/cm2). It is significant for practical applications because impact energy increases while the wear rate decreases. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses show that a large number of amorphous structures are produced on the sample surface at high E im , while no new crystalline phases appear. The abnormal wear behavior of the TiNiNb alloy can be attributed to the excellent wear behavior of amorphous structure and the consumption of impact energy during amorphous structure production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Z. Xu: Wear, 2002, vol. 253, pp. 597–603.10.1016/S0043-1648(02)00055-8 ↗
2. S.B. Newcomb and W.M. Stobs: Mater. Sci. Eng., 1984, vol. 66, pp. 195–200.10.1016/0025-5416(84)90180-0 ↗
3. V.G. Gavriljuk, A.I. Tyshchenko, O.N. Razumov, Yu.N. Petrov, B.D. Shanina, and H. Berns: Mater. Sci. Eng. A, 2006, vol. 420, pp. 47–54.10.1016/j.msea.2006.01.066 ↗
4. W. Yan, L. Fang, K. Sun, and Y. Xu: Mater. Sci. Eng. A, 2007, vols. 445–446, pp. 392–97.10.1016/j.msea.2006.09.061 ↗
5. W. Yan, L. Fang, K. Sun, and Y. Xu: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 542–49.10.1016/j.msea.2007.02.094 ↗
6. Y.H. Xu, Y.M. Chen, and J.H. Zhu: Prog. Nat. Sci., 2001, vol. 11 (6), pp. 447–53.
7. Y. Xu, Y. Chen, J. Xiong, and J. Zhu: Acta Metall. Sinica, 2001, vol. 37 (2), pp. 165–70.
8. Y.H. Xu, L. Fang, and J.H. Zhu: Wear, 2005, vol. 25, pp. 537–44.10.1016/j.wear.2004.06.002 ↗
9. Y.N. Petrov, V.G. Gavriljuk, H. Berns, and F. Schmalt: Wear, 2006, vol. 260, pp. 687–91.10.1016/j.wear.2005.04.009 ↗
10. N.P. Suh: Wear, 1977, vol. 44 (1), pp. 1–16.10.1016/0043-1648(77)90081-3 ↗
11. E. Lugscheider, O. Knotek, C. Wolff, and S. Bärwulf: Surf. Coat. Technol., 1999, vols. 116–119, pp. 141–46.10.1016/S0257-8972(99)00322-9 ↗
12. Li Jianming: Wear Metallography [M], Metallurgical Industry Press, Beijing, 1990, pp. 186–90.
13. L. Jiajun: Materials Wear Mechanisms and Wear Resistance [M], Tsinghua University Press, Beijing, 1993.
14. R. Liu and D.Y. Li: Mater. Sci. Eng., 2000, vol. A277, pp. 169–75.10.1016/S0921-5093(99)00534-1 ↗
15. Y.N. Liang, S.Z. Li, Y.B. Jin, W. Jin, and S. Li: Wear, 1996, vol. 198, pp. 236–41.10.1016/0043-1648(96)06989-X ↗
16. J.Y. Huang, H. Yasuda, and H. Mori: Phil. Mag. Lett., 1999, vol. 79, pp. 305–14.10.1080/095008399177147 ↗
17. Y.Q. Wu, X.Y. Yang, and Y.B. Xu: Acta Mater., 1999, vol. 47 (8), pp. 2431–36.10.1016/S1359-6454(99)00091-9 ↗
18. Z. Xu: Wear, 2002, vol. 253, pp. 597–603.10.1016/S0043-1648(02)00055-8 ↗