Reverse Transformation of Deformation-Induced Phases and Associated Changes in the Microstructure of Explosively Clad Ti-5Ta-2Nb and 304L SS
Source abstract
Abstract
Ti-5Ta-2Nb alloy was joined to 304L austenitic stainless steel by explosive cladding technique. Explosive cladding resulted in the formation of deformation-induced martensite in 304L SS and fcc phase of Ti in the Ti-5Ta-2Nb side of the joint. The stability of these metastable phases was systematically studied using high-temperature X-ray diffraction technique and transmission electron microscopy, which enabled the optimization of the temperature window for post-cladding heat treatments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. B. Raj and U. KamachiMudali: Prog. Nucl. Energy, 2006, vol. 48, pp. 283–313.10.1016/j.pnucene.2005.07.001 ↗
2. R.V. Tamhankar and J. Ramesam: Mater. Sci. Engg., 1974, vol. 13, pp. 245-54.10.1016/0025-5416(74)90195-5 ↗
3. F. Findik: Mater. Design, 2011, vol. 32, pp. 1081-93.10.1016/j.matdes.2010.10.017 ↗
4. H.B. Xia, S. Wang and H. Ben: Mater. Design, 2014, vol. 56, pp. 1014-9.10.1016/j.matdes.2013.12.012 ↗
5. B. Wronka: J. Mater. Sci, 2010, vol. 45, pp. 4078-83.10.1007/s10853-010-4494-4 ↗
6. C. Sudha, T.N. Prasanthi, S. Murugesan, S. Saroja, P. Kuppusami and M. Vijayalakshmi: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 133-9.10.1179/1362171810Y.0000000001 ↗
7. C. Sudha, T.N. Prasanthi, V. ThomasPaul, S. Saroja, and M. Vijayalaksmi: Metall. Mater. Trans., 2012, vol. 43A, pp. 3596–3607.10.1007/s11661-012-1198-1 ↗
8. C. Sudha, T.N. Prashanti, V. ThomasPaul, S. Saroja and M. Vijayalakshmi: Procedia Eng., 2014, vol. 86, pp. 42–50.10.1016/j.proeng.2014.11.009 ↗
9. A. Das, S. Tarafder and P.C. Chakraborti: Mater. Sci. Engg. A, 2011, vol. 529, pp. 9-20.10.1016/j.msea.2011.08.039 ↗
10. M. Smaga, F. Walther and D. Eifler: Mater. Sci. Engg. A, 2008, vol. 483-84, pp. 394-7.10.1016/j.msea.2006.09.140 ↗
11. W. Ozgowicz, A. Kurc and M. Kuick: Archives of Mater. Sci. Engg., 2010, vol. 43, pp. 42-53.
12. M. Stalder, S. Vogel, M.A.M. Bourke, J.G. Maldonado, D.J. Thoma and V.W. Yuan: Mater. Sci. Engg. A, 2000, vol. 280, pp. 270-81.10.1016/S0921-5093(99)00706-6 ↗
13. M. Martin, S. Weber, C. Izawa, S. Wagner, A. Pundt and W. Theisen: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 11195-206.10.1016/j.ijhydene.2011.05.133 ↗
14. F. Li, J. Mo, J. Li, J. Huang, W. Fan, and J. Fang: Procedia Eng., 2014, vol. 81, pp. 754–59.10.1016/j.proeng.2014.10.072 ↗
15. I. Manna, P.P. Chattopadhyay, P. Nandi, F. Banhart and H.J. Fecht: J. Appl. Phy., 2003, vol. 93(3), pp. 1520-4.10.1063/1.1530718 ↗
16. A.J. Phasha, H. Kasonde, and P.E. Ngoepe: 2008. http://researchspace.csir.co.za/dspace/bitstream/…/1/Phasha_P_2008.pdf.
17. S. Xiong, W. Qi, B. Huang, M. Wang and Y. Li: Mater. Chem. Phy., 2010, vol. 120, pp. 446-51.10.1016/j.matchemphys.2009.11.043 ↗
18. LV. Jinlong and L. Hongyun: Mater. Sci. Engg. C, 2014, vol. 34, pp. 484-90.10.1016/j.msec.2013.10.003 ↗
19. I. Meszaros and J. Prohaszka: J. Mater. Process. Technol., 2005, vol. 161, pp. 162-8.10.1016/j.jmatprotec.2004.07.020 ↗
20. A. Rezaee, A. Najafizadeh, A. Kermanpur and M. Moallemi: Mater. Design, 2011, vol. 32, pp. 4437-42.10.1016/j.matdes.2011.03.065 ↗