Microstructural Analysis of K-TIG-Welded New Ni-Based Superalloy VDM Alloy 780
Source abstract
Abstract
Abstract The fusion zone microstructures in K-TIG-welded and post-weld solution heat-treated new superalloy VDM Alloy 780 were examined. In addition, the kinetics of the base metal grain growth during solution heat treatments were analyzed. (S)TEM analyses show that major interdendritic microconstituents formed in the fusion zone due to elemental microsegregation are MC carbides and coarse irregularly shaped Laves phase. Additionally, minor secondary interdendritic phases are found to include γ′, γ″, and tiny plate-like Laves particles. To prevent any potential deterioration of mechanical properties caused by the irregular Laves phase, post-weld solution heat treatments (PWSHTs) at 954 °C to 1060 °C/1 hours were performed to remove the Laves phase. PWSHT at 954 °C only partially eliminates the Laves particles while forming an abundance of interdendritic δ/η phase. Laves phase is dissolved entirely without forming δ/η platelets after PWSHT at 1060 °C. It is proven that Laves eutectics in VDM Alloy 780’s fusion zone can be eliminated through PWSHT without significantly coarsening the base metal’s grain size in comparison to Alloy 718 as a result of substantial grain growth inhibition likely caused by solute segregation at grain boundaries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. J. Rösler, T. Hentrich, and B. Gehrmann: Metals, 2019, vol. 9, p. 1130.10.3390/met9101130 ↗
2. C. Ghica, C. Solis, J. Munke, A. Stark, B. Gehrmann, M. Bergner, J. Rösler, and R. Gilles: J. Alloys Compd., 2020, vol. 814, p. 152157.10.1016/j.jallcom.2019.152157 ↗
3. C. Solís, J. Munke, M. Bergner, A. Kriele, M. Mühlbauer, D. Cheptiakov, B. Gehrmann, J. Rösler, and R. Gilles: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4373–81.10.1007/s11661-018-4761-6 ↗
4. S. Cui, Y. Shi, T. Zhu, and W. Liu: J. Manuf. Process., 2019, vol. 37, pp. 418–24.10.1016/j.jmapro.2018.12.022 ↗
5. S. Cui, Z. Liu, Y. Fang, Z. Luo, S.M. Manladan, and S. Yi: J. Mater. Process. Technol., 2017, vol. 243, pp. 217–28.10.1016/j.jmatprotec.2016.12.027 ↗
6. Z. Fei, Z. Pan, D. Cuiuri, H. Li, S. Van Duin, and Z. Yu: J. Manuf. Process., 2019, vol. 45, pp. 340–55.10.1016/j.jmapro.2019.07.017 ↗
7. Z. Fei, Z. Pan, D. Cuiuri, H. Li, B. Wu, D. Ding, L. Su, and A.A. Gazder: J. Manuf. Process., 2018, vol. 32, pp. 482–93.10.1016/j.jmapro.2018.03.014 ↗
8. G.D. Janaki Ram, A. Venugopal Reddy, K. Prasad Rao, and G. Madhusudhan Reddy: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 390–98.10.1179/136217104225021788 ↗
9. K. Vishwakarma, N. Richards, and M. Chaturvedi: Mater. Sci. Eng. A, 2008, vol. 480, pp. 517–28.10.1016/j.msea.2007.08.002 ↗
10. M. Strum, L. Summers, and J. Morris Jr.: Weld. J., 1983, vol. 62, pp. 235s–s242.
11. A. Ariaseta, N. Sadeghinia, J. Andersson, and O. Ojo: Weld. World, 2023, vol. 67(1), pp. 209–22.10.1007/s40194-022-01425-y ↗
12. R.M. Langford and M. Rogers: Micron, 2008, vol. 39, pp. 1325–30.10.1016/j.micron.2008.02.006 ↗
13. P. N. Quested and M. McLean, Solidification technology in the foundry and cast house, 1980, pp. 586–91.
14. L. Ling, Y. Han, W. Zhou, H. Gao, D. Shu, J. Wang, M. Kang, and B. Sun: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 354–436.10.1007/s11661-014-2614-5 ↗
15. K. Kadoi, S. Ueda, S. Tokita, and H. Inoue: J. Alloys Compd., 2020, vol. 828, p. 154423.10.1016/j.jallcom.2020.154423 ↗
16. J. DuPont, A. Marder, M. Notis, and C. Robino: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2797–06.10.1007/s11661-998-0320-x ↗
17. T.F. Bower: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 624–34.
18. D. F. Paulonis, J. M. Oblak, and D. S. Duvall, (Pratt and Whitney Aircraft, Middletown, Conn.: 1969).
19. G. Asala, J. Andersson, and O.A. Ojo: J. Adv. Manuf. Technol., 2016, vol. 87, pp. 2721–29.10.1007/s00170-016-8642-0 ↗
20. O. Ojo, N. Richards, and M. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 421–33.10.1007/s11661-006-0013-2 ↗
21. R.G. Thompson, D.E. Mayo, and B. Radhakrishnan: Metall. Trans. A, 1991, vol. 22A, pp. 557–67.10.1007/BF02656823 ↗
22. H. Xu, Y. Zhang, H. Fu, F. Xue, X. Zhou, and J. Xie: J. Alloys Compd., 2022, vol. 891, p. 161965.10.1016/j.jallcom.2021.161965 ↗
23. A. Ariaseta, A.K. Khan, J. Andersson, and O. Ojo: Mater Charact, 2023, vol. 204, p. 113178.10.1016/j.matchar.2023.113178 ↗
24. L.O. Osoba, R.G. Ding, and O.A. Ojo: Mater Charact, 2012, vol. 65, pp. 93–99.10.1016/j.matchar.2011.12.009 ↗
25. O. Ojo, N. Richards, and M. Chaturvedi: Scr. Mater., 2004, vol. 51, pp. 683–88.10.1016/j.scriptamat.2004.06.013 ↗
26. M. Cieslak, G. Knorovsky, T. Headley, and A. Romig Jr, Sandia National Lab.(SNL-NM), Albuquerque, NM (United States), 1989.
27. E. Pickering, H. Mathur, A. Bhowmik, O. Messé, J. Barnard, M. Hardy, R. Krakow, K. Loehnert, H. Stone, and C. Rae: Acta Mater., 2012, vol. 60, pp. 2757–69.10.1016/j.actamat.2012.01.042 ↗
28. G. Asala, A. Khan, J. Andersson, and O. Ojo: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4211–28.10.1007/s11661-017-4162-2 ↗
29. F. Laves, H.J. Wallbaum, and Z. Kristallogr: Cryst. Mater., 1939, vol. 101, pp. 78–93.
30. G. Knorovsky, M. Cieslak, T. Headley, A. Romig, and W. Hammetter: Metall. Trans. A, 1989, vol. 20A, pp. 2149–58.10.1007/BF02650300 ↗
31. J.N. DuPont, M. Notis, A. Marder, C. Robino, and J. Michael: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2785–96.10.1007/s11661-998-0319-3 ↗
32. S. Sui, H. Tan, J. Chen, C. Zhong, Z. Li, W. Fan, A. Gasser, and W. Huang: Acta Mater., 2019, vol. 164, pp. 413–27.10.1016/j.actamat.2018.10.032 ↗
33. J.J. Schirra, R.H. Caless, and R.W. Hatala: Superalloys, 1991, vol. 718, pp. 375–88.10.7449/1991/Superalloys_1991_375_388 ↗
34. L.A. James: Weld J. Res. Suppl., 1978, vol. 57, pp. 17s–23s.
35. A. Segerstark, J. Andersson, L.-E. Svensson, and O. Ojo: Materials Charact., 2018, vol. 142, pp. 550–59.10.1016/j.matchar.2018.06.020 ↗
36. C.H. Radhakrishna and K.P. Rao: J. Mater. Sci., 1997, vol. 32, pp. 1977–84.10.1023/A:1018541915113 ↗
37. X. Yao, F. Liu, S. Yang, D. Liu, D. Jia, and W. Sun: J. Mater. R. Technol., 2021, vol. 15, pp. 4427–36.10.1016/j.jmrt.2021.10.068 ↗
38. A. Kaldellis, A. Alexandratou, A. Kladis, S. Deligiannis, P. Tsakiridis, and G. Fourlaris, (EDP Sciences: 2021), p. 02004.10.1051/matecconf/202134902004 ↗
39. K. Sivaprasad and S. Ganesh Sundara Raman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2115–27.10.1007/s11661-008-9553-y ↗
40. O.M. Messé, J.S. Barnard, E.J. Pickering, P.A. Midgley, and C.M.F. Rae: Philos. Magn., 2014, vol. 94(10), pp. 1132–52.10.1080/14786435.2013.878052 ↗
41. J. Sharma, A. Nicolaÿ, M. De Graef, and N. Bozzolo: Mater Charact, 2021, vol. 176, p. 1111053.10.1016/j.matchar.2021.111105 ↗
42. L.C.M. Valle, L.S. Araújo, S.B. Gabriel, J. Dille, and L.H. De Almeida: J. Mater. Eng. Perform., 2013, vol. 22, pp. 1512–18.10.1007/s11665-012-0433-7 ↗
43. S. Antonov, M. Detrois, R.C. Helmink, and S. Tin: J. Alloys Compd., 2015, vol. 626, pp. 76–86.10.1016/j.jallcom.2014.11.155 ↗
44. S. Sui, J. Chen, Z. Li, H. Li, X. Zhao, and H. Tan: Addit. Manuf., 2020, vol. 32, p. 101055.
45. D. Collins, B. Conduit, H. Stone, M. Hardy, G. Conduit, and R. Mitchell: Acta Mater., 2013, vol. 61, pp. 3378–91.10.1016/j.actamat.2013.02.028 ↗
46. K. Song and M. Aindow: Mater. Sci. Eng. A, 2008, vol. 479, pp. 365–72.10.1016/j.msea.2007.09.055 ↗
47. T. Sonar, V. Balasubramanian, S. Malarvizhi, T. Venkateswaran, and D. Sivakumar: Mater Charact, 2021, vol. 174, p. 110997.10.1016/j.matchar.2021.110997 ↗
48. G.D.J. Ram, A.V. Reddy, K.P. Rao, G.M. Reddy, and J.K.S. Sundar: J. Mater. Process. Technol., 2005, vol. 167, pp. 73–82.10.1016/j.jmatprotec.2004.09.081 ↗
49. B. Pieraggi, J. F. Uginet, and F. Pamiers Cedex, (The Minerals, Metals & Materials Society Pittsburgh: 1994).
50. M. Hafez Haghighat, J. Sharma, B. Gehrmann, H. Alves, and N. Bozzolo: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 2092–2111.10.1007/s11661-023-07018-8 ↗
51. J. Sharma, M.H. Haghighat, B. Gehrmann, C. Moussa, and N. Bozzolo: Superalloys, Springer, Cham, 2020, pp. 450–60.
52. J.J. Ruan, N. Ueshima, and K. Oikawa: J. Alloys Compd., 2018, vol. 737, pp. 83–91.10.1016/j.jallcom.2017.11.327 ↗
53. F. Najafkhani, S. Kheiri, B. Pourbahari, and H. Mirzadeh: Arch. Civ. Mech. Eng., 2021, vol. 21, pp. 1–20.10.1007/s43452-021-00185-8 ↗
54. G.T. Higgins: Met. Sci., 1974, vol. 8(1), pp. 143–50.10.1179/msc.1974.8.1.143 ↗
55. J.J. Bhattacharyya, S.R. Agnew, and G. Muralidharan: Acta Mater., 2015, vol. 86, pp. 80–94.10.1016/j.actamat.2014.12.009 ↗
56. G. Muralidharan and R.G. Thompson: Scr. Mater., 1997, vol. 36, pp. 755–61.10.1016/S1359-6462(96)00450-2 ↗
57. M. Pa, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913–24.10.2355/isijinternational.38.913 ↗
58. A.R. Eivani, S. Valipour, H. Ahmed, J. Zhou, and J. Duszczyk: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1109–16.10.1007/s11661-010-0452-7 ↗
59. R. Kirchheim: Acta Mater., 2002, vol. 50, pp. 413–19.10.1016/S1359-6454(01)00338-X ↗
60. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98.10.1016/0001-6160(62)90092-5 ↗
61. P. Lu, F. Abdeljawad, M. Rodriguez, M. Chandross, D.P. Adams, B.L. Boyce, B.G. Clark, and N. Argibay: Materialia, 2019, vol. 6, p. 100298.10.1016/j.mtla.2019.100298 ↗
62. J. Weissmüller: Nanostruct. Mater., 1993, vol. 3, pp. 261–72.10.1016/0965-9773(93)90088-S ↗
63. J. Weissmüller: J. Mater. Res., 1994, vol. 9, pp. 4–7.10.1557/JMR.1994.0004 ↗
64. M. Hillert and B.O. Sundman: Acta Metall., 1976, vol. 24(8), pp. 731–43.10.1016/0001-6160(76)90108-5 ↗
65. C.M. Barr, S.M. Foiles, M. Alkayyali, Y. Mahmood, P.M. Price, D.P. Adams, B.L. Boyce, F. Abdeljawad, and K. Hattar: Nanoscale, 2021, vol. 13, pp. 3552–63.10.1039/D0NR07180C ↗