journal article·2023-08

In Situ SEM/EBSD Observation of the Reverse Transformation Behavior of Austenite From Lath Martensite in C–Ni Steels

Natsumi Oura, Kazuki Fujiwara, Kaori Kawano

Publisher page

Abstract

The formation mechanism of austenite (γ) reversely transformed from lath martensite in 0.003C–9Ni and 0.03C–9Ni steels is studied using an in situ scanning electron microscopy/electron back scattering diffraction technique to reveal the mechanisms for controlling the fine γ microstructure. The formation of granular γ at the martensite packets and prior γ grain boundaries by a diffusionless shear mechanism in the 0.003C–9Ni steel affords γ grains with various crystallographic orientations. However, the reversely transformed γ phase in the 0.03C–9Ni steel has the same grain structure and crystallographic orientation as those of the prior γ phase before the first martensitic transformation, due to the formation of granular and acicular γ phases identified as the “γ memory effect.” This study reveals that the γ memory effect in the 0.03C–9Ni steel is attributed to cementite; the crystallographic orientation relationships between cementite, tempered lath martensite, and acicular γ phases restrict the crystallographic orientation of acicular γ grains to match that of the prior γ grains. Therefore, the orientation restriction mechanism is the most valid mechanism for the formation of acicular γ grains with the same crystallographic orientation as the prior γ grains. This study will help the further development of functional steels.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. O. Haiko, V. Javaheri, K. Valtonen, A. Kaijalainen, J. Hannula, and J. Komi: Wear, 2020, vol. 454, p. 203336.10.1016/j.wear.2020.203336 ↗
2. Y. Prawoto, N. Jasmawati, and K. Sumeru: J. Mater. Sci. Technol., 2012, vol. 28, pp. 461–66.10.1016/S1005-0302(12)60083-8 ↗
3. X. Li, X. Ma, S.V. Subramanian, C. Shang, and R. Misra: Mater. Sci. Eng. A, 2014, vol. 616, pp. 141–47.10.1016/j.msea.2014.07.100 ↗
4. G. Miyamoto, H. Usuki, Z.D. Li, and T. Furuhara: Acta Mater., 2010, vol. 58, pp. 4492–502.10.1016/j.actamat.2010.04.045 ↗
5. H.I. Aaronson, M.R. Plichta, G.W. Franti, and K.C. Russell: Metall. Trans. A, 1978, vol. 9A, pp. 363–71.10.1007/BF02646386 ↗
6. A.E. Nehrenberg: J. Met., 1950, vol. 188, pp. 162–74.
7. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Mater. Trans. A, 1981, vol. 12, pp. 1419–428.10.1007/BF02643686 ↗
8. J. Han and Y.K. Lee: Acta Mater., 2014, vol. 67, pp. 354–61.10.1016/j.actamat.2013.12.038 ↗
9. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3363–375.10.1007/s11661-004-0173-x ↗
10. H.K.D.H. Bhadeshia and J.W. Christian: Metall. Trans. A, 1990, vol. 21A, pp. 767–97.10.1007/BF02656561 ↗
11. S. Matsuda and Y. Okamura: Trans. Iron Steel Inst. Jpn., 1974, vol. 14, pp. 363–68.10.2355/isijinternational1966.14.363 ↗
12. S.S. D’Yachenko and G.V. Fedorov: Fiz. Metal. Metalloved., 1964, vol. 18, pp. 73–7.
13. S.T. Kimmins and D.J. Gooch: Metal Sci., 1983, vol. 17, pp. 519–31.10.1179/030634583790420484 ↗
14. T. Hara, N. Maruyama, Y. Shinohara, H. Asahi, G. Shigesato, M. Sugiyama, and T. Koseki: ISIJ Int., 2008, vol. 49, pp. 1792–800.10.2355/isijinternational.49.1792 ↗
15. N. Nakada, T. Tsuchiyama, S. Takaki, and S. Hashizume: ISIJ Int., 2007, vol. 47, pp. 1527–532.10.2355/isijinternational.47.1527 ↗
16. N. Nakada, T. Tsuchiyama, S. Takaki, and N. Miyano: ISIJ Int., 2011, vol. 51, pp. 299–304.10.2355/isijinternational.51.299 ↗
17. G. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
18. S. Watanabe and T. Kunitake: Tetsu-to-Hagane., 1975, vol. 61, pp. 96–106.10.2355/tetsutohagane1955.61.1_96 ↗
19. W. Pitsch: Acta Metall., 1962, vol. 10, pp. 897–900.10.1016/0001-6160(62)90108-6 ↗
20. Y.A. Bagaryatsky: Dokl. Akad. Nauk SSSR., 1950, vol. 73, pp. 1161–164.
21. Z.Q. Liu, G. Miyamoto, Z.G. Yang, and T. Furuhara: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4872–875.10.1007/s11661-013-1973-7 ↗
22. Z.Q. Liu, G. Miyamoto, Z.G. Yang, C. Zhang, and T. Furuhara: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5290–294.10.1007/s11661-014-2519-3 ↗
23. X. Zhang, G. Miyamoto, Y. Toji, S. Nambu, T. Koseki, and T. Furuhara: Acta Mater., 2018, vol. 144, pp. 601–12.10.1016/j.actamat.2017.11.003 ↗
24. X. Zhang, G. Miyamoto, T. Kaneshita, Y. Yoshida, Y. Toji, and T. Furuhara: Acta Mater., 2018, vol. 154, pp. 1–3.10.1016/j.actamat.2018.05.035 ↗
25. X. Zhang, G. Miyamoto, Y. Toji, and T. Furuhara: Metals., 2019, vol. 9, p. 266.10.3390/met9020266 ↗
26. X. Zhang, G. Miyamoto, Y. Toji, and T. Furuhara: Acta Mater., 2021, vol. 209, p. 116772.10.1016/j.actamat.2021.116772 ↗
27. T. Shinozaki, Y. Tomota, T. Fukino, and T. Suzuki: ISIJ Int., 2017, vol. 57, pp. 533–39.10.2355/isijinternational.ISIJINT-2016-557 ↗
28. G. Saito, T. Nakayama, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, and T. Yamaoka: Materialia., 2019, vol. 7, p. 100409.10.1016/j.mtla.2019.100409 ↗
29. Y. Tomota, W. Gong, S. Harjo, and T. Shinozaki: Scr. Mater., 2017, vol. 133, pp. 79–82.10.1016/j.scriptamat.2017.02.017 ↗
30. T. Fukino and A. Tsurekawa: Mater. Trans., 2008, vol. 49, pp. 2770–775.10.2320/matertrans.MAW200824 ↗
31. A. Taniyama, T. Amino, K. Hata, and J. Miki: ISIJ Int., 2020, vol. 60, pp. 714–20.10.2355/isijinternational.ISIJINT-2019-534 ↗
32. F.J. Humphreys, M. Ferry, I. Brough, and C.P. Johnson: Textures Microstruct., 1996, vol. 26–27, pp. 281–301.10.1155/TSM.26-27.281 ↗
33. L. Liu, Z.-G. Yang, C. Zhang, and W.-B. Liu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7204–209.10.1016/j.msea.2010.07.083 ↗
34. M. Bestmann, S. Piazolo, C.J. Spiers, and D.J. Prior: J. Struct. Geol., 2005, vol. 27, pp. 447–57.10.1016/j.jsg.2004.10.006 ↗
35. K. Hata, M. Wakita, K. Fujiwara, and K. Kawano: Nippon Steel Sumitomo Metal. Tech. Rep., 2017, vol. 404, pp. 24–30.
36. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–799.10.1016/S1359-6454(02)00577-3 ↗
37. T. Maki: Mater. Sci. Forum., 1990, vol. 56–58, pp. 157–68.10.4028/www.scientific.net/MSF.56-58.157 ↗
38. X. Zhang, Y. Ren, J. Zhang, X. Yang, X. Xie, H. Liu, and W. Yang: Mater. Character, 2022, vol. 190, p. 112025.10.1016/j.matchar.2022.112025 ↗
39. E. Kula and M. Cohen: Trans. ASM., 1954, vol. 46, pp. 727–58.
40. M.J.V. Genderen, M. Isac, A. Bottger, and E.J. Mittemeijer: Metall. Mater. Trans. A, 1997, vol. 28, pp. 545–61.10.1007/s11661-997-0042-5 ↗
41. A.S. Podder and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2121–128.10.1016/j.msea.2009.11.063 ↗
42. C. Lerchbacher, S. Zinner, and H. Leitner: Mater. Sci. Eng. A, 2013, vol. 564, pp. 163–68.10.1016/j.msea.2012.11.105 ↗
43. G. Yan, L. Han, C. Li, X. Luo, and J. Gu: J. Nucl. Mater., 2017, vol. 483, pp. 167–75.10.1016/j.jnucmat.2016.11.011 ↗
44. H. Shirazi, G. Miyamoto, S.H. Nadjad, T. Chiba, M.N. Ahmadabadi, and T. Furuhara: Acta Mater., 2018, vol. 144, pp. 269–80.10.1016/j.actamat.2017.10.068 ↗
45. C.A. Apple and G. Krauss: Acta Metall., 1972, vol. 20, pp. 849–56.10.1016/0001-6160(72)90077-6 ↗
46. H. Kitahara, R. Ueji, M. Ueda, N. Tsuji, and Y. Minamino: Mater. Character, 2005, vol. 54, pp. 378–86.10.1016/j.matchar.2004.12.015 ↗