On the Selective Oxidation of a 0.15C-6Mn-2Al-1Si Third-Generation Advanced High Strength Steel During Two-Stage Annealing Treatments
Source abstract
Abstract
The selective oxidation of a 0.15C-5.6Mn-1.9Al-1.1Si (wt pct) prototype third-generation advanced high-strength steel during dew point-controlled two-stage annealing with intermediate flash pickling was documented. After austenitization annealing at 1163 K for 600 s, the surfaces had compact nodules of MnO on top of co-precipitated nodules of MnSiO3/Mn2SiO4 and MnAl2O4. The intermediate flash pickling treatment dissolved the external MnO and Mn-Si oxides, leaving behind small, widely spaced MnAl2O4 nodules with significant fractions of metallic Fe exposed. Subsequent intercritical annealing at 983 K for 120 s resulted in no significant changes to the MnAl2O4 nodules due to solute depletion from the near-surface matrix during austenitization annealing. The resulting surfaces were relatively barren of external oxides and had significant fractions of metallic Fe boldly exposed, which are promising for reactive wetting by conventional continuous galvanizing baths. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. D.K. Matlock and J.G. Speer: in Proceedings of the 3rd International Conference on Structural Steels, H.C. Lee, ed., Korean Institute of Metals and Materials, Seoul, Korea, 2006, pp. 774–81.
2. D.K. Matlock and J.G. Speer: Third Generation of AHSS: Microstructure Design Concepts, Springer, Jamshedpur, 2009.
3. E. De Moor, P.J. Gibbs, J.G. Speer, and D.K. Matlock: AIST Trans., 2010, vol. 7, pp. 133–44.
4. D.K. Matlock, J.G. Speer, E. De Moor, and P.J. Gibbs: JESTECH, 2012, vol. 15, pp. 1–2.
5. K.M.H. Bhadhon, J.R. McDermid, and F.E. Goodwin: in Proc. 10th Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech 2015, Toronto, 2015, pp. 936–43.
6. K.M.H. Bhadhon, J.R. McDermid, X. Wang, E.A. McNally, and F.E. Goodwin: in Proc. 11th Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech 2017, ISIJ International, Tokyo, 2017, pp. 493–500.
7. D.M. Pallisco, J.R. McDermid, E.A. McNally, and F.E. Goodwin: in Proc. 11th Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech 2017, Tokyo, 2017, pp. 782–89.
8. D.M. Pallisco, K.M.H. Bhadhon, V. Patel, M. Pourmajidian, F.E. Goodwin, and J.R. McDermid: in Proc. 4th Int’l Conf. on Medium and High-Manganese Steels, 2019, pp. 375–78.
9. V. Patel: McMaster University, 2019.
10. D.M. Pallisco and J.R. McDermid: Mater. Sci. Eng. A, 2020, vol. 778, 139111.10.1016/j.msea.2020.139111 ↗
11. J. Mahieu, S. Claessens, B.C. De Cooman, and F.E. Goodwin: in Galvatech 2004 Proceedings, M.A. Baker, ed., Association for Iron and Steel Technology, Chicago, IL, 2004, pp. 529–38.
12. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2753–68.10.1007/s11661-011-0685-0 ↗
13. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2426–41.10.1007/s11661-011-0983-6 ↗
14. R. Sagl, A. Jarosik, D. Stifter, and G. Angeli: Corros. Sci., 2013, vol. 70, pp. 268–75.10.1016/j.corsci.2013.01.039 ↗
15. R. Sagl, A. Jarosik, G. Angeli, T. Haunschmied, G. Hesser, and D. Stifter: Acta Mater., 2014, vol. 72, pp. 192–99.10.1016/j.actamat.2014.03.037 ↗
16. M. Pourmajidian and J.R. McDermid: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1795–1808.10.1007/s11661-018-4513-7 ↗
17. G. Seyed Mousavi and J.R. McDermid: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5546–60.10.1007/s11661-018-4854-2 ↗
18. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–2908.10.1007/s11661-001-1042-5 ↗
19. P. Drillet, Z. Zermout, D. Bouleau, J. Mataigne, and S. Claessens: in Galvatech 2004 Proceedings, M.A. Baker, ed., Association for Iron and Steel Technology, Chicago, IL, 2004, pp. 1123–34.
20. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1539–53.10.1007/s11661-010-0192-8 ↗
21. S. Alibeigi, R. Kavitha, R.J. Meguerian, and J.R. McDermid: Acta Mater., 2011, vol. 59, pp. 3537–49.10.1016/j.actamat.2011.02.027 ↗
22. S. Prabhudev, S. Swaminathan, and M. Rohwerder: Corros. Sci., 2011, vol. 53, pp. 2413–18.10.1016/j.corsci.2011.03.027 ↗
23. M. Norden, M. Blumenau, T. Wuttke, and K.J. Peters: Appl. Surf. Sci., 2013, vol. 271, pp. 19–31.10.1016/j.apsusc.2012.12.103 ↗
24. E.M. Bellhouse and J.R. McDermid: Mater. Sci. Eng. A, 2008, vol. 491, pp. 39–46.10.1016/j.msea.2007.12.033 ↗
25. Y. Tobiyama and C. Kato: Tetsu-to-Hagané, 2003, vol. 89, pp. 38–45.10.2355/tetsutohagane1955.89.1_38 ↗
26. R. Khondker, A.I.M. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
27. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1460–73.10.1007/s11661-010-0185-7 ↗
28. R. Kavitha and J.R. McDermid: Surf. Coat. Technol., 2012, vol. 212, pp. 152–58.10.1016/j.surfcoat.2012.09.038 ↗
29. L. Cho, J.S. Lee, M.S. Kim, Y.H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 362–71.10.1007/s11661-012-1392-1 ↗
30. L. Cho, M.S. Kim, Y.H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5081–95.10.1007/s11661-013-1867-8 ↗
31. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, and S. Yamaguchi: ISIJ Int., 2009, vol. 49, pp. 564–73.10.2355/isijinternational.49.564 ↗
32. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. ISIJ, 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
33. J. Maki, J. Mahieu, B.C. De Cooman, and S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–31.10.1179/026708303225009300 ↗
34. M. Pourmajidian and J.R. McDermid: ISIJ Int., 2018, vol. 58, pp. 1635–43.10.2355/isijinternational.ISIJINT-2017-688 ↗
35. L. Cho, M.S. Kim, Y.H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4484–98.10.1007/s11661-014-2394-y ↗
36. L. Cho, E.J. Seo, G.S. Jung, D.W. Suh, and B.C. De Cooman: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1705–19.10.1007/s11661-016-3331-z ↗
37. M. Pourmajidian, B. Langelier, and J.R. McDermid: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5561–73.10.1007/s11661-018-4855-1 ↗
38. G. Seyed Mousavi, B. Langelier, and J.R. McDermid: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 2898–11.10.1007/s11661-019-05202-3 ↗
39. M. Pourmajidian and J.R. McDermid: Surf. Coat. Technol., 2019, vol. 357, pp. 418–26.10.1016/j.surfcoat.2018.10.028 ↗
40. J. Oh, L. Cho, M.S. Kim, K. Kang, and B.C. De Cooman: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5474–86.10.1007/s11661-016-3735-9 ↗
41. Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2009, vol. 49, pp. 557–63.10.2355/isijinternational.49.557 ↗
42. L. Cho, G.S. Jung, and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5158–72.10.1007/s11661-014-2442-7 ↗
43. G. Seyed Mousavi and J.R. McDermid: Surf. Coat. Technol., 2018, vol. 351, pp. 11–20.10.1016/j.surfcoat.2018.06.060 ↗
44. H. Luo and H. Dong: Mater. Sci. Eng. A, 2015, vol. 626, pp. 207–12.10.1016/j.msea.2014.12.049 ↗
45. K.M.H. Bhadhon: McMaster University, 2017.
46. K. Steineder, D. Krizan, R. Schneider, C. Béal, and C. Sommitsch: Acta Mater., 2017, vol. 139, pp. 39–50.10.1016/j.actamat.2017.07.056 ↗
47. A.E. Morris: 2013.10.12968/indn.2013.4.2.96641 ↗
48. M. Oku and K. Hirokawa: J. Electron. Spectros. Relat. Phenomena, 1976, vol. 8, pp. 475–81.10.1016/0368-2048(76)80034-5 ↗
49. S.L.T. Andersson and M.S. Scurrell: J. Catal., 1979, vol. 59, pp. 340–56.10.1016/S0021-9517(79)80003-2 ↗
50. B.R. Strohmeier and D.M. Hercules: J. Phys. Chem., 1984, vol. 88, pp. 4922–29.10.1021/j150665a026 ↗
51. J. Finster: 1988, vol. 12, pp. 309–14.10.1002/sia.740120507 ↗
52. J.F. Moulder, W.F. Stickle, P.E. Sobol, and K.D. Bomben: Handbook of X-Ray Photoelectron Spectroscopy, Physical Electronics Inc, Eden Prairie, MN, 1995.
53. A.P. Grosvenor, E.M. Bellhouse, A. Korinek, M. Bugnet, and J.R. McDermid: J. Appl. Surf. Sci., 2016, vol. 379, pp. 242–48.10.1016/j.apsusc.2016.03.235 ↗
54. J.H. Rask, B.A. Miner, and P.R. Buseck: Ultramicroscopy, 1987, vol. 21, pp. 321–26.10.1016/0304-3991(87)90030-1 ↗
55. M. Sternitzke and G. Müller: J. Am. Ceram. Soc., 1994, vol. 77, pp. 737–42.10.1111/j.1151-2916.1994.tb05358.x ↗
56. K. Naoe, M. Nishiki, and K. Sato: J. Therm. Spray Technol., 2014, vol. 23, pp. 1333–38.10.1007/s11666-014-0172-4 ↗
57. C.F. Jones, R.S.C. Smart, and P.S. Turner: J. Chem. Soc. Faraday Trans., 1990, vol. 86, pp. 947–53.10.1039/ft9908600947 ↗
58. J.F. Banfield, G.G. Ferruzzi, W.H. Casey, and H.R. Westrich: Geochemica Cosm. Acta, 1995, vol. 59, pp. 19–31.10.1016/0016-7037(94)00372-S ↗
59. W.H. Casey, M.F. Hochella, and H.R. Westrich: Geochim. Cosmochim. Acta, 1993, vol. 57, pp. 785–93.10.1016/0016-7037(93)90168-V ↗
60. C.R. Shastry, J.A. Rotole, and T.W. Kaiser: 7th Int. Conf. Zinc Zinc Alloy Coat. Steel Sheet, 2007, p. Paper B-6–2, 403–408.
61. X.S. Li, S.-I. Baek, C.-S. Oh, S.-J. Kim, and Y.-W. Kim: Scr. Mater., 2007, vol. 57, pp. 113–16.10.1016/j.scriptamat.2007.03.040 ↗
62. Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
63. Y.F. Gong, Y.R. Lee, H.S. Kim, and B.C. De Cooman: in Asia-Pacific Galvanizing Conference 2009 Proceedings, Jeju Island, South Korea, 2009, p. paper A-41.
64. G. Seyed Mousavi and J.R. McDermid: in Proc. 11th Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech 2017, 2017, pp. 485–92.
65. X.S. Li, S.-I. Baek, C.-S. Oh, S.-J. Kim, and Y.-W. Kim: Scr. Mater., 2008, vol. 59, pp. 290–93.10.1016/j.scriptamat.2008.03.025 ↗
66. C.C. Ahn, O.L. Krivanek, Gatan Inc., and Arizona State University: EELS Atlas: A Reference Collection of Electron Energy Loss Spectra Covering All Stable Elements, Gatan, Inc., Warrendale, PA, USA, 1983.
67. G. Kissinger, M.A. Schubert, D. Kot, and T. Grabolla: ECS J. Solid State Sci. Technol., 2017, vol. 6, pp. N54-63.10.1149/2.0061707jss ↗
68. G. Eriksson, P. Wu, M. Blander, and A.D. Pelton: Can. Metall. Q., 1994, vol. 13, pp. 13–21.10.1179/cmq.1994.33.1.13 ↗
69. Thermodata: 2005.
70. D. Huin, P. Flauder, and J.-B. Leblond: Oxid. Met., 2005, vol. 64, pp. 131–67.10.1007/s11085-005-5718-x ↗
71. I.H. Jung, Y.B. Kang, S.A. Decterov, and A.D. Pelton: Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 2004, vol. 35, pp. 259–68.10.1007/s11663-004-0027-3 ↗
72. K.M.H. Bhadhon and J.R. McDermid: J. Electrochem. Soc., 2022, vol. 169, 061504.10.1149/1945-7111/ac790a ↗
73. H. Oikawa: Technology Reports, 1983.
74. J. Takada, S. Yamamoto, S. Kikuchi, and M. Adachi: Oxid. Met., 1986, vol. 25, pp. 93–105.10.1007/BF00807998 ↗
75. R.J. Borg and D.Y.F. Lai: J. Appl. Phys., 1970, vol. 41, pp. 5193–200.10.1063/1.1658644 ↗
76. Diffusion Information Center: Diffusion Data: A Continuous Compilation of New Reference Data on Diffusion Processes in Inorganic Solids and Their Melts, 1969.
77. J. Takada, K. Kashiwagi, and M. Adachi: J. Mater. Sci., 1984, 19, vol. 19.10.1007/BF00549838 ↗