journal article·2022-06

Electrochemical Behavior of SLM Ti–6Al–4V Alloy After Long Time of Immersion in Lactic Acid Environment

Alexandra Banu, Loredana Preda, Maria Marcu, Luciana Laura Dinca, Monica Elisabeta Maxim, Gabriel Dobri

Publisher page

Abstract

The corrosion behavior of selective laser melted Ti–6Al–4V alloy (SLM Ti–6Al–4V) was assessed in 0.1 M lactic acid + 0.1 M NaCl environment (pH 2.5) after 1150 hours of immersion at 37 °C and was compared with that of wrought Ti–6Al–4V alloy. Corrosion potential Ecor (Ecor = 0.083 ± 0.02 V) and corrosion current icor (icor = 0.145 ± 0.05 μA cm−2) of SLM Ti–6Al–4V alloy, estimated from anodic polarization tests, are under minimum recommended values for biomaterial surgical applications. Based on open-circuit potential (OCP) investigations, one may infer that this good corrosion resistance is due to the formation of a fast and stable protective oxide layer. According to X-ray photoelectron spectroscopy (XPS) results, this protective oxide layer is mainly formed from TiO2. From electrochemical impedance spectroscopy (EIS) investigations, a slightly lower corrosion resistance was observed at SLM Ti–6Al–4V alloy compared to the wrought one. Thus, the R1 associated with barrier film resistance of SLM Ti–6Al–4V is 339.1 kΩ cm2 whereas that one of wrought Ti–6Al–4V is 780.1 kΩ cm2. These results are conspicuous ones because they point out that SLM technique, which allows obtaining easily customized implants without expensive costs, is a valid alternative for obtaining new alloys for medical applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Q. Qu, L. Wang, Y. Chen, L. Li, Y. He, and Z. Ding: Materials, 2014, vol. 7, pp. 5528–42.10.3390/ma7085528 ↗
2. C. Vasilescu, S.I. Drob, P. Osiceanu, J.M. Calderon Moreno, M. Prodana, D. Ionita, I. Demetrescu, M. Marcu, I.A. Popovici, and E. Vasilescu: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 513–23.10.1007/s11661-016-3774-2 ↗
3. C. Vasilescu, P. Osiceanu, J.M.C. Moreno, S.I. Drob, S. Preda, M. Popa, I. Dan, M. Marcu, M. Prodana, I.A. Popovici, D. Ionita, and E. Vasilescu: Mater. Sci. Eng. C, 2017, vol. 71, pp. 322–34.10.1016/j.msec.2016.10.004 ↗
4. D.M. Gordin, R. Ion, C. Vasilescu, S.I. Drob, A. Cimpean, and T. Gloriant: Mater. Sci. Eng. C, 2014, vol. 44, pp. 362–70.10.1016/j.msec.2014.08.003 ↗
5. F. Toptan, A.C. Alves, O. Carvalho, F. Bartolomeu, F. Silva, G. Miranda, and A.M.P. Pinto: J. Mater. Process. Technol., 2019, vol. 266, pp. 239–45.10.1016/j.jmatprotec.2018.11.008 ↗
6. R. Huang, M. Riddle, D. Graziano, J. Warren, S. Das, S. Nimbalkar, J. Cresko, and E. Masanet: J. Clean. Prod., 2016, vol. 135, pp. 1559–70.10.1016/j.jclepro.2015.04.109 ↗
7. T.M. Pollock, A.J. Clarke, and S.S. Babu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 6000–19.10.1007/s11661-020-06009-3 ↗
8. H.M. Hamza, K.M. Deen, and W. Haider: Mater. Sci. Eng. C, 2020, vol. 113, p. 110980.10.1016/j.msec.2020.110980 ↗
9. D. Mah, M.H. Pelletier, V. Lovric, and W.R. Walsh: Ann. Biomed. Eng., 2019, vol. 47, pp. 162–73.10.1007/s10439-018-02111-1 ↗
10. M.P. Licausi, A. Igual, V. Munozand, and A. Borras: J. Mech. Behav. Biomed. Mater., 2013, vol. 20, pp. 137–48.10.1016/j.jmbbm.2013.01.019 ↗
11. J.C.M. Souza, S.L. Barbosa, E. Ariza, J.P. Celis, and L.A. Rocha: Wear, 2012, vol. 292–293, pp. 82–88.10.1016/j.wear.2012.05.030 ↗
12. A. Banu, M. Marcu, C. Juganaru, P. Osiceanu, M. Anastasescu, and L. Capra: Arab. J. Chem., 2019, vol. 12, pp. 2007–16.10.1016/j.arabjc.2017.06.003 ↗
13. Y. Okazakia and E. Gotoh: Biomaterials, 2005, vol. 26, pp. 11–21.10.1016/j.biomaterials.2004.02.005 ↗
14. ASTM B977, ASTM F1108-97 Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406) ASTM F2924-14 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion.
15. ISO 10271/2001-Dental Metallic Materials-Corrosion Test Methods.
16. J. Vaithilingam, E. Prina, R.D. Goodridge, R.J.M. Hague, F.R.A.J. Rose, S.D.R. Christie, and S. Edmondson: Mater. Sci. Eng. C, 2016, vol. 67, pp. 294–303.10.1016/j.msec.2016.05.054 ↗
17. A. Tamadon, D.J. Pons, K. Sued, and D. Clucas: Metals, 2017, vol. 7, p. 423.10.3390/met7100423 ↗
18. M. Fousova, D. Vojtech, J. Kubasek, E. Jablonska, and J. Fojt: J. Mech. Behav. Biomed. Mater., 2017, vol. 69, pp. 368–76.10.1016/j.jmbbm.2017.01.043 ↗
19. K.S. Chan, M. Koike, R.L. Mason, and T. Okabe: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1010–22.10.1007/s11661-012-1470-4 ↗
20. L.L. Dinca Boulven, A. Banu, G.N. Soylu, G. Dobri, and M.E. Mocirla: MATEC Web of Conferences 299 01005 MTeM 2019, 2019.10.1051/matecconf/201929901005 ↗
21. F. Variola, J.H. Yi, L. Richert, J.D. Wuest, F. Rosei, and A. Nanci: Biomaterials, 2008, vol. 29, p. 1285.10.1016/j.biomaterials.2007.11.040 ↗
22. M. Jenko, M. Goren, M. Gotec, M. Hodnik, B. Setinabati, C. Donik, J.T. Grant, and D. Dolinar: Appl. Surf. Sci., 2018, vol. 427, pp. 584–93.10.1016/j.apsusc.2017.08.007 ↗
23. L. Ponsonnet, K. Reybier, N. Jaffrezic, V. Comte, C. Lagneau, M. Lissac, and C. Martelet: Mater. Sci. Eng. C, 2003, vol. 23, pp. 551–60.10.1016/S0928-4931(03)00033-X ↗
24. Y. Yan, E. Chibowski, and A. Szcześ: Mater. Sci. Eng. C, 2017, vol. 70, pp. 207–51.10.1016/j.msec.2016.08.080 ↗
25. X. Zhu, J. Chen, L. Scheidler, and J. Geis-Gerstorfer: Biomaterials, 2004, vol. 25, pp. 4087–4103.10.1016/j.biomaterials.2003.11.011 ↗
26. F.X. Xie, X.B. He, S.L. Cao, X. Lu, and X.H. Qu: Corros. Sci., 2013, vol. 67, pp. 217–24.10.1016/j.corsci.2012.10.036 ↗
27. M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed. Pergamon Press, New York, 1966, pp. 243–45.
28. R. Chelariu, G. Bolat, J. Izquierdo, D. Mareci, D.M. Gordin, T. Gloriant, and R.M. Souto: Electrochim. Acta, 2014, vol. 137, pp. 280–89.10.1016/j.electacta.2014.06.021 ↗
29. L. Preda, C. Negrila, M.F. Lazarescu, M. Enache, M. Anastasescu, A.M. Toader, S. Ionescu, and V. Lazarescu: Electrochim. Acta, 2013, vol. 104, pp. 1–11.10.1016/j.electacta.2013.04.077 ↗
30. J. Yang, H. Yang, H. Yu, Z. Wang, and X.A. Zeng: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 3583–86.10.1007/s11661-017-4087-9 ↗
31. D. Wang, P. Li, K. Kang, C. Zang, J. Yin, M. Jing, and X. Zeng: Surf. Coat. Technol., 2016, vol. 300, pp. 128–34.10.1016/j.surfcoat.2016.05.040 ↗
32. A. Sharma, M.C. Oh, J.T. Kim, A.K. Srivastava, and B. Ahn: J. Alloys Compd., 2020, vol. 830, p. 154620.10.1016/j.jallcom.2020.154620 ↗
33. M. Eliaz: Materials, 2019, vol. 12, p. 407.10.3390/ma12030407 ↗
34. R. Ion, C. Vasilescu, P. Drob, E. Vasilescu, A. Cimpean, S.I. Drob, D.M. Gordin, and T. Gloriant: Mater. Corros., 2014, vol. 65, pp. 593–604.10.1002/maco.201206724 ↗
35. E. Almanza, M.J. Pérez, N.A. Rodríguez, and L.E. Murr: J. Mater. Res. Technol., 2017, vol. 6, pp. 251–57.10.1016/j.jmrt.2017.05.003 ↗