journal article·2022-03

Effect of Deformation-Induced Martensitic Transformations in a SMAW Butt Joint of the 304 Stainless Steel on its Strain Field Distributions

Anatoliy Klopotov, Mikhail Slobodyan, Alexander Smirnov, Nikolay Ababkov, Natalya Popova, Kirill Kurgan, Artem Ustinov, Yuriy Abzaev, Elena Nikonenko

Publisher page

Abstract

The paper reports the effect of plane tensile stresses on changes in the microstructure and phase composition in a butt joint of plates from the 304 austenitic stainless steel obtained by shielded metal arc welding. Both evolution of strain field distributions and data obtained by transmission diffraction electron microscopy are presented. The deformation-induced γ → α transformation was observed in addition to the γ → ε one. High plasticity and significant strain hardening of the steel were established. For the welded steel sample, the ratio of ultimate tensile strength to the yield point reduced from 3.3 (for the as-received metal) down to 2.6. At the elastic stage, a fragmented structure was observed in the form of local macroregions, within which strain levels differed by ±(30–40)pct from the average one over the entire area of the welded sample surface. These local macroregions were a kind of deformation or elastic-plastic domains, which could include some groups of grains. The transition from the elastic strain region to the plastic one caused a change in all strain field distributions on the welded sample surface. Small local areas merged into large homogeneous regions characterized by high strain levels. The presence of the welded joint resulted in the formation of local macroregions with both lower and higher plastic strain levels on the longitudinal and transverse field distributions in speckle images than the averaged values over the entire sample surface. These macroregions was due to the inhomogeneity of residual stresses and the deformation-induced γ → α → ε martensitic transformations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. M. Soleimani, A. Kalhor, and H. Mirzadeh: Mater. Sci. Eng. A., 2020, vol. 795, p. 140023.10.1016/j.msea.2020.140023 ↗
2. F. Borgioli: Metals., 2020, vol. 10(2), p. 187.10.3390/met10020187 ↗
3. L. Gardner: Thin-Walled Struct., 2019, vol. 141, pp. 208–16.10.1016/j.tws.2019.04.019 ↗
4. M.H. Hebdon and J.T. Provines: J. Perform. Constr. Facil., 2020, vol. 34(6), p. 04020108.10.1061/(ASCE)CF.1943-5509.0001498 ↗
5. G. Kim, T. Kim, B. Hwang, and J. Kim: Thin-Walled Struct., 2020, vol. 155, p. 106950.10.1016/j.tws.2020.106950 ↗
6. H.X. Yuan, J.D. Gao, M. Theofanous, L. Yang, and B.W. Schafer: J. Constr. Steel Res., 2020, vol. 173, p. 106239.10.1016/j.jcsr.2020.106239 ↗
7. E. Folkhard: Welding Metallurgy of Stainless Steels, Springer, New York, 1984.
8. J.C. Lippold and D.J. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, Willey, New Jersey, 2005.
9. M. Muhammed, M. Mustapha, T.L. Ginta, A.M. Ali, F. Mustapha, and C.C. Hampo: Processes., 2020, vol. 8(7), p. 811.10.3390/pr8070811 ↗
10. K. Pańcikiewicz, A. Świerczyńska, P. Hućko, and M. Tumidajewicz: Materials., 2020, vol. 13(20), p. 4540.10.3390/ma13204540 ↗
11. G. Rogalski, A. Świerczyńska, M. Landowski, and D. Fydrych: Metals., 2020, vol. 10(5), p. 559.10.3390/met10050559 ↗
12. Q. Wang, J. Shen, S. Hu, G. Zhao, and J. Zhou: Materials., 2020, vol. 13(18), p. 4016.10.3390/ma13184016 ↗
13. A. Saboori, A. Aversa, G. Marchese, S. Biamino, M. Lombardi, and P. Fino: Appl. Sci., 2020, vol. 10(9), p. 3310.10.3390/app10093310 ↗
14. W. Jin, C. Zhang, S. Jin, Y. Tian, D. Wellmann, and W. Liu: Appl. Sci., 2020, vol. 10(5), p. 1563.10.3390/app10051563 ↗
15. N. Haghdadi, M. Laleh, M. Moyle, and S. Primig: J. Mater. Sci., 2021, vol. 56, pp. 64–107.10.1007/s10853-020-05109-0 ↗
16. A. Gupta, A. Kumar, T. Baskaran, S.B. Arya, and R.K. Khatirkar: Trans. Indian Inst. Met., 2018, vol. 71(7), pp. 1595–606.10.1007/s12666-018-1294-z ↗
17. V. Hosseini, K. Hurtig, and L. Karlsson: Weld. World., 2020, vol. 64(4), pp. 283–99.10.1007/s40194-019-00829-7 ↗
18. G.-G. Youn, Y.-J. Kim, and Y. Miura: Nucl. Eng. Technol., 2021, vol. 53(4), pp. 1357–68.10.1016/j.net.2020.10.007 ↗
19. A. O’Brien: Welding Handbook, 9th ed., vol. 2, Welding Processes, Part 1. American Welding Society, Miami, 2004.
20. A. O’Brien: Welding Handbook, 9th ed., vol. 3, Welding Processes, Part 2. American Welding Society, Miami, 2007.
21. D. Radaj: Heat Effects of Welding. Temperature Field, Residual Stress, Distortion, Springer, Berlin, 1992.
22. E. Niemi: Stress Determination for Fatigue Analysis of Welded Components, Abington Publishing, Cambridge, 1995.10.1533/9780857093202 ↗
23. Z. Feng: Processes and Mechanisms of Welding Residual Stress and Distortion, Woodhead Publishing, Cambridge, 2005.10.1201/9781439823712 ↗
24. G.M. Hassan: Opt. Lasers Eng., 2021, p. 137106394.
25. M.I. Latypov, J.-C. Stinville, J.R. Mayeur, J.M. Hestroffer, T.M. Pollock, and I.J. Beyerlein: Scripta Mater., 2021, vol. 192, pp. 78–82.10.1016/j.scriptamat.2020.10.001 ↗
26. W. Zhang, Y. Xie, L. Peng, H. Liao, and Y. Wan: J. Nucl. Mater., 2021, vol. 543, p. 152565.10.1016/j.jnucmat.2020.152565 ↗
27. J. Hensel, T. Nitschke-Pagel, D. TchoffoNgoula, H.-T. Beier, D. Tchuindjang, and U. Zerbst: Eng. Fract. Mech., 2018, vol. 198, pp. 123–41.10.1016/j.engfracmech.2017.10.024 ↗
28. L. Pan, B.P. Athreya, J.A. Forck, W. Huang, L. Zhang, T. Hong, W. Li, W. Ulrich, and J.C. Mach: Weld. World., 2013, vol. 57, pp. 685–91.10.1007/s40194-013-0067-x ↗
29. M. Odnobokova, A. Belyakov, and R. Kaibyshev: Adv. Eng. Mater., 2015, vol. 17(12), pp. 1812–20.10.1002/adem.201500100 ↗
30. Z. Yanushkevich, A. Lugovskaya, A. Belyakov, and R. Kaibyshev: Mater. Sci. Eng., A., 2016, vol. 667, pp. 279–85.10.1016/j.msea.2016.05.008 ↗
31. M. Odnobokova, A. Belyakov, and R. Kaibyshev: Mater. Sci. Forum., 2017, vol. 879, pp. 1414–9.10.4028/www.scientific.net/MSF.879.1414 ↗
32. B.-A. Behrens, S. Hübner, A. Bouguecha, J. Knigge, K. Voges-Schwieger, and K. Weilandt: Adv. Mater. Res., 2010, vol. 137, pp. 1–33.10.4028/www.scientific.net/AMR.137.1 ↗
33. V.V. Mishakin, V.A. Klyushnikov, and A.V. Gonchar: Techn. Phys., 2015, vol. 60(5), pp. 665–8.10.1134/S1063784215050163 ↗
34. S.V. Panin, V.L. Klimenov, O.N. Nekhoroshkov, and V.E. Panin: Phys. Mesomech., 2001, vol. 4(2), pp. 51–64. (in Russian).
35. A.N. Smirnov, N.A. Popova, N.V. Ababkov, E.L. Nikonenko, E.A. Ozhiganov, and N.A. Koneva: Fundam. Probl. Mod. Mater. Sci., 2018, vol. 15(3), pp. 434–41. (in Russian).
36. N.A. Popova, A.N. Smirnov, E.L. Nikonenko, N.V. Ababkov, and N.A. Koneva: Proc. Univ. Phys., 2019, vol. 62(9), pp. 48–57. (in Russian).
37. Specification on the CL-11 Electrodes. https://www.spetselectrode.ru/electrod/cl11.htm. Accessed 28 October 2021.
38. ISO 3581:2016 Welding Consumables—Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat-Resisting Steels—Classification.
39. ISO/DIS 3651-2:1998 Determination of Resistance to Intergranular Corrosion of Stainless Steels—Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels—Corrosion Test in Media Containing Sulfuric Acid.
40. M.A. Sutton, J.-J. Orteu, and H.W. Schreier: Image Correlation for Shape, Motion and Deformation Measurements. Basic Concepts, Theory and Applications, Springer, Boston, 2009.
41. R. Bobbili and V. Madhu: J. Alloy. Compd., 2016, vol. 684, pp. 162–70.10.1016/j.jallcom.2016.05.155 ↗
42. P.B. Hirsch, A. Howrie, R.B. Nicholson, D.W. Pashley, and M.J. Whelan: Electron Microscopy of Thin Crystals, Butterworths, London, 1965.
43. N.A. Koneva and E.V. Kozlov: Sov. Phys. J., 1991, vol. 34, pp. 224–36.10.1007/BF00894926 ↗
44. N.A. Koneva, E.V. Kozlov: Perspective Materials. TSU Publishing House, Tula, 2006. pp. 267–320. (in Russian)
45. B.N. Strunin: FTT., 1967, vol. 9(3), pp. 805–12. (in Russian).
46. N.A. Koneva and E.V. Kozlov: Proc. Univ. Phys., 1982, vol. 8, pp. 3–14. (in Russian).
47. L.I. Lysak, B.I. Nikolin: Physical Foundations of Heat Treatment of Steel. Technics, Kiev, 1975. (in Russian).
48. O.O. Lambakahar and Y.I. Pascal: Proc. Univ. Phys., 1977, vol. 1, pp. 158–61. (in Russian).
49. T.F. Volynova: High Manganese Steels and Alloys, Metallurgy, Moscow, 1988. (in Russian).
50. L.M. Utevsky: Diffraction Electron Microscopy in Metal Science, Metallurgy, Moscow, 1973. (in Russian).
51. N. Koneva, S. Kiseleva, and N. Popova: Structure Evolution and Internal Stress Fields. Austenitic Steel, LAP LAMBER Academic Publishing, Saarbrucken, 2017. (in Russian).
52. O.P. Maksimkin and M.N. Gusev: Phys. Met. Met. Sci., 2010, vol. 110(5), pp. 524–9. (in Russian).
53. V.A. Starenchenko, Y.D. Lipatnikova, and Y.V. Solovyova: Proc. Univ. Phys., 2018, vol. 61(4), pp. 106–14. (in Russian).
54. S.V. Dobatkin, O.V. Rybalchenko, N.A. Enikeev, A.A. Tokar, and M.M. Abramova: Mater. Lett., 2016, vol. 166, pp. 276–9.10.1016/j.matlet.2015.12.094 ↗
55. G.A. Salishchev, R.G. Zaripova, and A.A. Zakirova: Met. Sci. Heat Treat., 2006, vol. 48, pp. 70–5.10.1007/s11041-006-0046-6 ↗
56. M. Tikhonova, N. Enikeev, R. Valiev, A. Belyakov, and R. Kaibyshev: Mater. Sci. Forum., 2016, vol. 838–9, pp. 398–403.10.4028/www.scientific.net/MSF.838-839.398 ↗
57. V.L. Romanova, R.P. Balakhonov, L.V. Panin, E.E. Batukhtina, M.S. Kazachenok, and B.C. Shakhidzhanov: Phys. Mesomech., 2017, vol. 20(3), pp. 81–90. (in Russian).10.1134/S1029959917030080 ↗
58. T.V. Muravyov and L.B. Zuev: J. Techn. Phys., 2008, vol. 78(8), pp. 137–42. (in Russian).
59. N.A. Koneva, E.V. Kozlov: Structural Levels of Plastic Deformation and Fracture. Science, Novosibirsk, 1990. pp. 123–86. (in Russian).
60. S. Yoshida, T. Sasaki, M. Usui, and I.-K. Park: Phys. Mesomech., 2015, vol. 18(6), pp. 32–44.
61. Y.N. Saraev, N.I. Golikov, V.V. Dmitriev, I.I. Sannikov, V.P. Bezborodov, and A.A. Grigorieva: MetalProcess., 2013, vol. 3, pp. 16–24. (in Russian).
62. Y.N. Goikhenberg: Met. Sci. Heat Treat., 2015, vol. 56, pp. 477–82.10.1007/s11041-015-9785-6 ↗
63. Y.B. Das, A.N. Forsey, T.H. Simm, K.M. Perkins, M.E. Fitzpatrick, S. Gungor, and R.J. Moat: Mater. Des., 2016, vol. 112, pp. 107–16.10.1016/j.matdes.2016.09.057 ↗
64. M. Okayasu and S. Tomida: Mater. Sci. Eng. A., 2017, vol. 684, pp. 712–25.10.1016/j.msea.2016.12.101 ↗
65. I.Y. Litovchenko, S.A. Akkuzin, N.A. Polekhina, A.N. Tyumentsev, and E.P. Naiden: Russ. Phys. J., 2016, vol. 59, pp. 782–7.10.1007/s11182-016-0837-1 ↗
66. Z.H. Cai, H. Ding, Z.Y. Tang, and R.D.K. Misra: Mater. Sci. Eng. A., 2016, vol. 676, pp. 289–93.10.1016/j.msea.2016.08.124 ↗
67. E.G. Astafurova and Y.I. Chumlyakov: Phys. Met. Metallogr., 2009, vol. 108, p. 510.10.1134/S0031918X09110118 ↗
68. E.G. Astafurova, G.G. Maier, E.V. Melnikov, V.A. Moskvina, V.F. Vojtsik, G.N. Zakharov, A.I. Smirnov, and V.A. Bataev: Phys. Mesomech., 2018, vol. 21, pp. 263–73.10.1134/S1029959918030116 ↗
69. I.A. Kurzina, A.I. Potekaev, N.A. Popova, E.L. Nikonenko, T.V. Dement, A.A. Klopotov, V.V. Kulagina, and V.A. Klimenov: Russ. Phys. J., 2018, vol. 61, pp. 715–21.10.1007/s11182-018-1452-0 ↗
70. V.A. Klimenov, S.F. Gnyusov, A.I. Potekaev, A.A. Klopotov, Y.A. Abzaev, K.A. Kurgan, M.R. Marzol, S.V. Galsanov, V.Y. Tsellermayer, and E.S. Marchenko: Russ. Phys. J., 2017, vol. 60, pp. 990–1000.10.1007/s11182-017-1168-6 ↗
71. N.A. Popova, A.N. Smirnov, E.L. Nikonenko, N.V. Ababkov, and N.A. Koneva: Russ. Phys. J., 2020, vol. 62, pp. 1587–94.10.1007/s11182-020-01880-4 ↗