The Constant-Stress, Constant-Heating-Rate Test: A Novel Method for Characterizing Transient Mechanical Behavior of Metallic Materials
Source abstract
Abstract
A novel mechanical test for characterizing the transient, on-heating mechanical behavior of metallic structural materials was developed. It comprises the continuous heating of a specimen at a constant rate while loaded under a constant true stress. Key features of the approach consist of quantifying the thermal expansion (“thermal compliance”) and mechanical compliance of the load train, modeling the plastic flow and onset of localized necking of the test specimen, and the simulation of concurrent phase changes for multi-phase alloys. From such experiments and analyses, the instantaneous, true plastic strain and strain rate as a function of temperature can readily be determined and used to establish constitutive parameters (such as the apparent activation energy, Qapp, for plastic flow) and temperatures at which rapid deformation may occur. The test technique was validated for three alloys, Ti–7Al, Ti–6Al–2Sn–4Zr–2Mo–0.1Si (Ti6242S), and superalloy 718. For the single-phase-α titanium alloy, Ti–7Al, semi-log plots of strain rate vs inverse temperature (ln $$\dot{\varepsilon }$$ vs 1/T) were linear, and yielded a value of Qapp comparable to that for self diffusion of hcp titanium. The corresponding plots for Ti6242S with either a fully equiaxed or duplex (equiaxed/colony α) microstructure were also linear, but exhibited higher values of Qapp, a finding rationalized using simulations of the kinetics of dissolution of equiaxed α as a function of temperature and the so-called “mechanical contribution” to the activation energy of two-phase alloy systems. Last, ln $$\dot{\varepsilon }$$ -vs-1/T plots of 718 were either linear (in the solution-treated condition) or approximately bilinear (in the solution-treated-and-aged condition). These observations were interpreted with the aid of simulations of precipitation and dissolution of γ′′ and γ′ during continuous heating and the retarding effect on straining of a threshold (back) stress associated with the precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Handbook of Workability and Process Design, G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds., ASM International, Materials Park, OH, 2003.
2. ASM Handbook, Vol. 8: Mechanical Testing and Evaluation, Tenth Edition, H.A. Kuhn and D. Medlin, eds., ASM International, Materials Park, OH, 2000.
3. A.M. Sabroff, F.W. Boulger, and H.J. Henning: Forging Materials and Practices, Rheinhold Book Company, New York, 1968.
4. T. Altan, F.W. Boulger, J.R. Becker, N. Akgerman, and H.J. Henning: Forging Equipment, Materials, and Practices, Report MCIC-HB-03, Metals and Ceramics Information Center, Battelle’s Columbus Laboratories, Columbus, OH, 1973.
5. Quenching and Control of Distortion, H.E. Boyer and P.R. Cary, eds., ASM International, Materials Park, OH, 1988.
6. S.S. Babu, N. Raghavan, J. Raplee, S.J. Foster, C. Frederick, M. Haines, S. Dinwiddie, M.K. Kirka, A. Plotkowski, Y. Lee, and R.R. Dehoff: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 3764–80.10.1007/s11661-018-4702-4 ↗
7. W.E. Frazier: J. Mater. Eng. Perf., 2014, vol. 24, pp. 1917–28.10.1007/s11665-014-0958-z ↗
8. L. Wang, M. Preuss, P.J. Withers, G. Baxter, and P. Wilson: Metall. Mater. Trans. B., 2005, vol. 36B, pp. 513–23.10.1007/s11663-005-0043-y ↗
9. L.B. Yang, J.-C. Gebelin, and R.C. Reed: Mater. Sci. Technol., 2011, vol. 27, pp. 1249–64.10.1179/1743284710Y.0000000022 ↗
10. D.W. Mahaffey, O.N. Senkov, R. Shivpuri, and S.L. Semiatin: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 3981–4000.10.1007/s11661-016-3600-x ↗
11. D.J. Tung, D.W. Mahaffey, O.N. Senkov, S.L. Semiatin, and W. Zhang: Sci. Technol. Weld. Join., 2019, vol. 24, pp. 136–47.10.1080/13621718.2018.1491377 ↗
12. P.G. Tucker and P.S. Keogh: Proc. Inst. Mech. Engrs., 1995, vol. 209, pp. 99–108.10.1243/PIME_PROC_1995_209_061_02 ↗
13. F.R. DeJarnette, H.H. Hamilton, K.J. Weilmuenster, and F.M. Cheatwood: J. Thermophys., 1987, vol. 1, pp. 5–12.10.2514/3.1 ↗
14. D. Knight, O. Chazot, J. Austin, M.A. Badr, G. Candler, B. Celik, D. de Rosa, R. Donelli, J. Komives, A. Lani, D. Levin, I. Nompelis, M. Panesi, G. Pezzella, B. Reimann, O. Tumuklug, and K. Yuceil: Prog. Aerospace Sci., 2017, vol. 90, pp. 39–53.10.1016/j.paerosci.2017.02.001 ↗
15. P.D. Nicolaou, R.E. Bailey, and S.L. Semiatin: in Handbook of Workability and Process Design, G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds., ASM International, Materials Park, OH, 2003, pp. 68-85.
16. H.G. Suzuki and D. Eylon: Mater. Sci. Eng. A., 1998, vol. A243, pp. 126–33.10.1016/S0921-5093(97)00789-2 ↗
17. F.F. Noecker II and J.N. DuPont: Welding J., 2009, vol. 88 (#1), pp. 7s–20s.
18. S. Shi, J.C. Lippold, and J. Ramirez: Welding J., 2010, vol. 89 (#10), pp. 210s–17s.
19. S.S. Babu, J. Livingston, and J.C. Lippold: Metall. Mater. Trans. A., 2013, vol. 44, pp. 3577–91.10.1007/s11661-013-1782-z ↗
20. M. Saby, E. Massoni, and N. Bozzolo: Mater. Charact., 2014, vol. 89, pp. 88–92.10.1016/j.matchar.2014.01.001 ↗
21. S. Tabaie, D. Shahriari, C. Plouze, A. Devaux, J. Cormier, and M. Jahazi: Mater. Sci. Eng. A, 2019, vol. A766, paper 138391.10.1016/j.msea.2019.138391 ↗
22. A. Constantinescu, A. Charkaluk, G. Lederer, and L. Verger: Inter. J. Fatigue, 2004, vol. 26, pp. 805–818.10.1016/j.ijfatigue.2004.01.006 ↗
23. H. Sehitoglu: in Advances in Fatigue Lifetime Predictive Techniques, ASTM STP 1122, M. R. Mitchell and R.W. Landgraf, eds., American Society for Testing and Materials, Philadelphia, 1992, pp. 47–76.10.1520/STP24152S ↗
24. J. Cormier, M. Jouiad, F. Hamon, P. Villechaise, and X. Milhet: Philos. Mag. Ltrs., 2010, vol. 90 (#8), pp. 611–20.10.1080/09500839.2010.489887 ↗
25. J. Cormier: in Superalloys 2016, M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., TMS, Warrandale, PA, 2016, pp. 385–94.
26. S.L. Semiatin, N.C. Levkulich, C.A. Heck, A.E. Mann, N. Bozzolo, A.L. Pilchak, and J.S. Tiley: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 2291–305.10.1007/s11661-020-05673-9 ↗
27. S.L. Semiatin, N.C. Levkulich, R. Larsen, J.S. Tiley, K.N. Wertz, F. Zhang, T.M. Smith, R.Y. Zhang, H.B. Dong, P. Gadaud, and J. Cormier: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 3706–26.10.1007/s11661-021-06362-x ↗
28. S.L. Semiatin and G.A. Sargent: Key Eng. Mater., 2010, vol. 433, pp. 235–40.10.4028/www.scientific.net/KEM.433.235 ↗
29. S.L. Semiatin and J.J. Jonas: Formability and Workability of Metals: Plastic Instability and Flow Localization, American Society for Metals, Metals Park, OH, 1984.
30. A.K. Ghosh and R.A. Ayres: Metall. Trans. A., 1976, vol. 7A, pp. 1589–91.10.1007/BF02656404 ↗
31. S.L. Semiatin, J.S. Tiley, F. Zhang, T.M. Smith, R.Y. Zhang, H.B. Dong, P. Gadaud, and J. Cormier: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 483–99.10.1007/s11661-020-06092-6 ↗
32. Y. Mishin and C. Herzig: Acta Mater., 2000, vol. 48, pp. 589–623.10.1016/S1359-6454(99)00400-0 ↗
33. H. Oikawa and T. Oomori: Mater. Sci. Eng. A., 1988, vol. A104, pp. 125–30.10.1016/0025-5416(88)90413-2 ↗
34. S.L. Semiatin, N.C. Levkulich, A.A. Salem, and A.L. Pilchak: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 4695–710.10.1007/s11661-020-05884-0 ↗
35. H. Araki, T. Yamane, Y. Minamino, S. Saji, Y. Hana, and S.B. Jung: Metall. Mater. Trans. A., 1994, vol. 25A, pp. 874–6.10.1007/BF02665465 ↗
36. H. Oikawa, Y. Ishikawa, and M. Seki: in Titanium ’92: Science and Technology, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 1779-1786.
37. H. Oikawa, K. Nishimura, and M.X. Cui: Scripta Metall., 1985, vol. 19, pp. 825–8.10.1016/0036-9748(85)90200-5 ↗
38. P. Dadras and J.F. Thomas Jr.: Metall. Trans. A., 1981, vol. 12A, pp. 1867–76.10.1007/BF02643797 ↗
39. S.L. Semiatin and G.D. Lahoti: Metall. Trans. A., 1981, vol. 12A, pp. 1705–17.10.1007/BF02643753 ↗
40. L. Briottet, J.J. Jonas, and F. Montheillet: Acta Mater., 1996, vol. 44, pp. 1665–72.10.1016/1359-6454(95)00257-X ↗
41. S.L. Semiatin, F. Montheillet, G. Shen, and J.J. Jonas: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 2719–27.10.1007/s11661-002-0394-9 ↗
42. P. Vo, M. Jahazi, S. Yue, and P. Bocher: Mater. Sci. Eng. A., 2007, vol. A447, pp. 99–110.10.1016/j.msea.2006.10.032 ↗
43. M. Kulakov, S. Rahimi, and S.L. Semiatin: Metall. Mater. Trans. A, 2021, vol. 52A, in press.
44. S.L. Semiatin, T.M. Lehner, J.D. Miller, R.D. Doherty, and D.U. Furrer: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 910–21.10.1007/s11661-007-9088-7 ↗
45. J.M. Oblak, D.F. Paulonis, and D.S. Duvall: Metall. Trans. A., 1974, vol. 5, pp. 143–53.10.1007/BF02642938 ↗
46. M.C. Chaturvedi and Y.F. Han: Metal Sci., 1983, vol. 17, pp. 145–9.10.1179/030634583790421032 ↗
47. A. Drexler, A. Fischersworring-Bunk, B. Oberwinkler, W. Ecker, and H.-P. Gänser: Int. J. Plasticity., 2018, vol. 105, pp. 62–73.10.1016/j.ijplas.2017.11.003 ↗
48. S. Zhang, X. Lin, L. Wang, X. Yu, Y. Hu, H. Yang, L. Lei, and W. Huang: Mater. Sci. Eng. A, 2021, vol. A812, paper 141145, pp. 1–11.10.1016/j.msea.2021.141145 ↗
49. L.X. Zhou and T.N. Baker: Mater. Sci. Eng. A., 1994, vol. A177, pp. 1–9.10.1016/0921-5093(94)90472-3 ↗
50. M.C. Chaturvedi and Y.F. Han: Mater. Sci. Eng., 1987, vol. 89, pp. 25–33.10.1016/0025-5416(87)90264-3 ↗
51. M.C. Chaturvedi and Y.F. Han: in Superalloy 718 — Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 489–98.10.7449/1989/Superalloys_1989_489_498 ↗
52. G. Shen, S.L. Semiatin, and T. Altan: J. Mater. Proc. Technol., 1993, vol. 36, pp. 303–19.10.1016/0924-0136(93)90036-6 ↗
53. J. Mao, K.M. Chang, V.L. Keefer, and D. Furrer: J. Mater. Eng. Perform., 2000, vol. 9(2), pp. 204–14.10.1361/105994900770346169 ↗
54. J. Cormier and G. Cailletaud: Mater. Sci. Eng. A., 2010, vol. A527, pp. 6300–12.10.1016/j.msea.2010.06.023 ↗
55. R. Giraud, Z. Hervier, J. Cormier, G. Saint-Martin, F. Hamon, X. Milhet, and J. Mendez: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 131–46.10.1007/s11661-012-1397-9 ↗
56. J.-B. le Graverend, J. Cormier, F. Gallerneau, P. Villechaise, S. Kruch, and J. Mendez: Int. J. Plasticity., 2014, vol. 59, pp. 55–83.10.1016/j.ijplas.2014.03.004 ↗