Effects of Ni Content on Reversible Deformation-Induced Martensitic Transformation of Fe–Mn–Cr–Si–Ni Alloy Under Uniaxial Deformation
Source abstract
Abstract
The effects of Ni on the reversible deformation-induced martensitic transformation of Fe–20Mn–11Cr–4Si–xNi (x = 2, 4, 6 wt pct) alloys and the corresponding deformation mechanism under uniaxial deformation were studied. As the Ni content increased, the amount of strain-induced and athermal e-martensite decreased because the Ni addition increased the thermal stability and stacking fault energy (SFE). In contrast, the deformation-induced reverse transformation e → γ sharply increased. TEM and EBSD analyses showed that Shockley partial dislocations remained at the same slip plane for the reversible martensitic transformation (γ ↔ e). Thus, SF intersection and athermal e-martensite acted as a barrier against dislocation movement in reverse martensite phase transformation (e → γ). This suggests that the Ni content should be optimized to balance the forward and reverse phase transformation under plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R. Desroches and B. Smith: J. Earthq. Eng., 2004, vol. 8(3), pp. 415–29.
2. T. Sawaguchi, T. Maruyama, H. Otsuka, A. Kushibe, Y. Inoue, and K. Tsuzaki: Mater. Trans., 2016, vol. 57(3), pp. 283–93.10.2320/matertrans.MB201510 ↗
3. T. Sawaguchi, I. Nikulin, K. Ogawa, K. Sekido, S. Takamori, T. Maruyama, Y. Chiba, A. Kushibe, Y. Inoue, and K. Tsuzaki: Scripta Mater., 2015, vol. 99, pp. 49–52.10.1016/j.scriptamat.2014.11.024 ↗
4. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A., 2018, vol. 49A(6), pp. 2248–56.10.1007/s11661-018-4583-6 ↗
5. S. Martin, S. Wolf, U. Martin, L. Kruger, and D. Rafaja: Metall. Mater. Trans. A., 2016, vol. 47A(1), pp. 49–58.10.1007/s11661-014-2684-4 ↗
6. Y. Tian, O.I. Gorbatov, A. Borgenstam, A.V. Ruban, and P. Hedstrom: Metall. Mater. Trans. A., 2017, vol. 48A(1), pp. 1–7.10.1007/s11661-016-3839-2 ↗
7. M.J. Sohrabi, M. Naghizadeh, and H. Mirzadeh: Arch. Civ. Mech. Eng., 2020, vol. 20(4), pp. 1–24.10.1007/s43452-020-00130-1 ↗
8. Y.H. Shen, Y.L. Song, L. Hua, and J. Lu: J. Mater. Eng. Perform., 2017, vol. 26(4), pp. 1830–8.10.1007/s11665-017-2579-9 ↗
9. M. Abbasi, A. Saeed-Akbari, and M. Naderi: Mater. Sci. Eng. A Struct., 2012, vol. 538, pp. 356–63.10.1016/j.msea.2012.01.060 ↗
10. T. Sawaguchi, P. Sahu, T. Kikuchi, K. Ogawa, S. Kajiwara, A. Kushibe, M. Higashino, and T. Ogawa: Scripta Mater., 2006, vol. 54(11), pp. 1885–90.10.1016/j.scriptamat.2006.02.013 ↗
11. A. Sato, E. Chishima, K. Soma, and T. Mori: Acta Metall. Mater., 1982, vol. 30(6), pp. 1177–83.10.1016/0001-6160(82)90011-6 ↗
12. B.C. Maji, M. Krishnan, and V.V.R. Rao: Metall. Mater. Trans. A., 2003, vol. 34A(5), pp. 1029–42.10.1007/s11661-003-0124-y ↗
13. N. Stanford and D.P. Dunne: Acta Mater., 2010, vol. 58(20), pp. 6752–62.10.1016/j.actamat.2010.08.041 ↗
14. Q. Gu, J. Vanhumbeeck, and L. Delaey: J. Phys. Iv., 1994, vol. 4(C3), pp. 135–44.
15. N.H. Moser, T.S. Gross, and Y.P. Korkolis: Metall. Mater. Trans. A., 2014, vol. 45A(11), pp. 4891–6.10.1007/s11661-014-2422-y ↗
16. A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock: Scripta Mater., 2004, vol. 50(12), pp. 1445–9.10.1016/j.scriptamat.2004.03.011 ↗
17. S.S.F. de Dafe, F.L. Sicupira, F.C.S. Matos, N.S. Cruz, D.R. Moreira, and D.B. Santos: Mater. Res.-Ibero-Am. J., 2013, vol. 16(6), pp. 1229–36.10.1590/S1516-14392013005000129 ↗
18. H.S. Yang, J.H. Jang, H.K.D.H. Bhadeshia, D.W. Suh: Calphad, 2012, 36(16-22).10.1016/j.calphad.2011.10.008 ↗
19. Y.C. Dong, Z.L. Sun, H. Xia, J.H. Feng, J.J. Du, W. Fang, B.X. Liu, G.K. Wang, L. Li, X. Zhang, and F.X. Yin: Met. Basel., 2018, vol. 8(10), pp. 1–16.
20. Y. Ma, W.W. Song, and W. Bleck: Materials., 2017, vol. 10(10), pp. 1–16.10.3390/ma10101129 ↗
21. S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58(15), pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
22. S. Curtze, V.T. Kuokkala, A. Oikari, J. Talonen, and H. Hanninen: Acta Mater., 2011, vol. 59(3), pp. 1068–76.10.1016/j.actamat.2010.10.037 ↗
23. Q.P. Meng, Y.H. Rong, S.P. Chen, and T.Y. Hsu: Mater. Lett., 2001, vol. 50(5–6), pp. 328–32.10.1016/S0167-577X(01)00248-8 ↗
24. Y. Koizumi, S. Suzuki, K. Yamanaka, B.S. Lee, K. Sato, Y.P. Li, S. Kurosu, H. Matsumoto, and A. Chiba: Acta Mater., 2013, vol. 61(5), pp. 1648–61.10.1016/j.actamat.2012.11.041 ↗
25. W.J. Lu, C.H. Liebscher, G. Dehm, D. Raabe, and Z.M. Li: Adv. Mater., 2018, vol. 30(44), p. 1804727.10.1002/adma.201804727 ↗
26. T. Mitsunobu, Y. Koizumi, B.S. Lee, and A. Chiba: Scripta Mater., 2014, vol. 74, pp. 52–5.10.1016/j.scriptamat.2013.10.015 ↗
27. H.L. Zhao, M. Song, S. Ni, S. Shao, J. Wang, and X.Z. Liao: Acta Mater., 2017, vol. 131, pp. 271–9.10.1016/j.actamat.2017.03.058 ↗
28. H. Fujita and S. Ueda: Acta Metall. Mater., 1972, vol. 20(5), pp. 759–67.10.1016/0001-6160(72)90104-6 ↗
29. G.B. Olson and M. Cohen: Metall. Trans. A., 1976, vol. 7(12), pp. 1897–904.10.1007/BF02659822 ↗
30. C. Ullrich, R. Eckner, L. Kruger, S. Martin, V. Klemm, and D. Rafaja: Mater. Sci. Eng. A., 2016, vol. 649, pp. 390–9.10.1016/j.msea.2015.10.021 ↗
31. Y. Tomota, M. Strum, and J.W. Morris: Metall. Trans. A., 1986, vol. 17(3), pp. 537–47.10.1007/BF02643961 ↗
32. S.M. Vakili, A. Zarei-Hanzaki, A.S. Anoushe, H.R. Abedi, M.H. Mohammad-Ebrahimi, M. Jaskari, S.S. Sohn, D. Ponge, and L.P. Karjalainen: Acta Mater., 2020, vol. 185, pp. 474–92.10.1016/j.actamat.2019.12.040 ↗
33. M. Eskandari, A. Zarei-Hanzaki, M.A. Mohtadi-Bonab, Y. Onuki, R. Basu, A. Asghari, and J.A. Szpunar: Mater. Sci. Eng. A., 2016, vol. 674, pp. 514–28.10.1016/j.msea.2016.08.024 ↗
34. R.L. Klueh, P.J. Maziasz, and E.H. Lee: Mater. Sci. Eng. A., 1988, vol. 102(1), pp. 115–24.10.1016/0025-5416(88)90539-3 ↗
35. R.L. Fleischer: Acta Metall. Mater., 1959, vol. 7(2), pp. 134–5.10.1016/0001-6160(59)90122-1 ↗