journal article·2021-10

Creep and Hot Tensile Behavior of AISI 201LN Austenitic Stainless Steel

Gustavo Henrique Pelissari, Diogo Pedrino Braga, Pedro Henrique Fernandes Oliveira, Danielle Cristina Camilo Magalhães, Maurizio Ferrante, Carlos Alberto Della Rovere, Andrea Madeira Kliauga, Levi de Oliveira Bueno, Vitor Luiz Sordi

Publisher page

Abstract

AISI 200LN is a low nickel austenitic stainless steel (SS) in which nitrogen and manganese are used for nickel substitution. It shows excellent mechanical properties at room and cryogenic temperatures, with a lower production cost, if compared to the traditional 300 series SS. In spite of that, the performance of AISI 200 series SS under creep conditions remains largely underexplored in the literature. This study aims to assess the mechanical response of the AISI 201LN alloy when subjected to hot tensile and creep tests. The tensile tests were conducted at room temperature and in the range of 500 °C to 800 °C, whereas the creep tests were performed under constant load and within the temperature range 600 °C to 800 °C. Correlations among stress, temperature, secondary creep rate, rupture time, and creep ductility were obtained and results were compared to the literature data for the 300 series of traditional stainless steels. Based on the Zener–Hollomon parameter, constitutive equations were applied to describe the creep behavior of AISI 201LN within the range of stresses and temperatures used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. J. Charles: Rev. Metall., 2007, vol. 104, pp. 308–17. .10.1051/metal:2007120 ↗
2. ISSF: Stainless Steel in Figures 2020, ISSF-International Stainless Steel Forum, 2020. https://www.worldstainless.org/statistics/stainless-steel-in-figures/. Accessed 20 Jan 2021.
3. J. Charles, A. Kosmac, J. Krautschick, J.A. Simón, N. Suutala, and T. Taulavuori: Austenitic Chromium–Manganese Stainless Steels—A European Approach. Materials and Applications Series, 2012. https://www.worldstainless.org/media/lqrfojpy/austenitic_crmn_en.pdf. Accessed 28 Jan 2021.
4. E.I. Galindo-Nava and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2017, vol. 128, pp. 120–34. .10.1016/j.actamat.2017.02.004 ↗
5. A.P. Marques de Oliveira, M. Houmard, W. da Silva Labiapari, and C. Godoy: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 1663–71. .10.1007/s11661-019-05123-1 ↗
6. Y. Ikegami and R. Nemoto: ISIJ Int., 1996, vol. 36, pp. 855–61. .10.2355/isijinternational.36.855 ↗
7. A. Rezaee, A. Kermanpur, A. Najafizadeh, M. Moallemi, and H. Samaei Baghbadorani: Materials., 2013, vol. 46, pp. 49–53. .
8. M. Moallemi, A. Kermanpur, A. Najafizadeh, A. Rezaee, H.S. Baghbadorani, and P.D. Nezhadfar: Mater. Sci. Eng. A., 2016, vol. 653, pp. 147–52. .10.1016/j.msea.2015.12.006 ↗
9. A.S. Hamada, L.P. Karjalainen, R.D.K. Misra, and J. Talonen: Mater. Sci. Eng. A., 2013, vol. 559, pp. 336–44. .10.1016/j.msea.2012.08.108 ↗
10. ASTM-International: ASTM E8/E8M-13: Standard Test Methods for Tension Testing of Metallic Materials. ASTM-International, West Conshohocken, 2013.
11. ASTM-International: ASTM E21-09: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials. ASTM-International, West Conshohocken, 2017.
12. ASTM-International: ASTM E139-11: Standard Test Method for Conducting Creep, Creep-Rupture and Stress-Rupture Tests of Metallic Materials. ASTM-International, West Conshohocken, 2011.
13. ASTM-International: ASTM E112–13: Standard Test Methods for Determining Average Grain Size. ASTM-International, West Conshohocken, 2013.
14. A.S. Hamada, A.P. Kisko, P. Sahu, and L.P. Karjalainen: Mater. Sci. Eng. A., 2015, vol. 628, pp. 154–9. .10.1016/j.msea.2015.01.042 ↗
15. AISI: A Designers Handbook Series—No. 9004—High Temperature Characteristics of Stainless Steels, AISI-American Iron and Steel Institute, 2020. https://nickelinstitute.org/media/1699/high_temperaturecharacteristicsofstainlesssteel_9004_.pdf. Accessed 28 Jan 2021.
16. J.J. Jonas and M.J. Luton: in Advances in Deformation Processing. J.J. Burke, et al. eds., Plenum Press, New York, 1978, pp. 215–42.10.1007/978-1-4613-4024-9_7 ↗
17. M. Li, Y. Duan, D. Yao, Y. Guan, and L. Yang: Metals., 2020, vol. 10, p. 64. .10.3390/met10010064 ↗
18. W.G. Kim, S.N. Yoon, and W.S. Ryu: Key Eng. Mater., 2005, vol. 297, pp. 2272–7. .10.4028/www.scientific.net/KEM.297-300.2272 ↗
19. J.T. Boyle and J. Spence: Stress Analysis for Creep, Butterworth & Co. Ltd., 1988. ISBN 0408-01172-6.
20. K.R. Williams and B. Wilshire: Met. Sci. J., 1973, vol. 7, pp. 176–9. .10.1179/030634573790445695 ↗
21. M.D. Mathew, G. Sasikala, K.B.S. Rao, and S.L. Mannan: Mater. Sci. Eng. A., 1991, vol. 148, pp. 253–60. .10.1016/0921-5093(91)90827-A ↗
22. D.G. Morris and D.R. Harries: Met. Sci. J., 1978, vol. 12, pp. 525–31. .10.1179/msc.1978.12.11.525 ↗
23. M.E. Kassner and M.T.P. Prado: Fundamentals of Creep in Metals and Alloys. Elsevier Ltd., Amsterdam, 2004.
24. R. Viswanathan: Damage Mechanisms and Life Assessment of High Temperature Components. ASM International, Materials Park, 1989.10.31399/asm.tb.dmlahtc.9781627083409 ↗
25. C. Zener and H. Hollomon: J. Appl. Phys., 1944, vol. 15, pp. 22–7. .10.1063/1.1707363 ↗
26. T.G. Langdon: Strength of Metals and Alloys (ICSMA 6) Proceedings of the 6th International Conference, Melbourne, Australia, R.C. Gifkins, ed., 1982, p. 1105.10.1016/B978-1-4832-8423-1.50168-1 ↗
27. S.A.A. Akbari Mousavi and M. Meisami: Int. Conf. Metall. Mater.—METAL, Roznov pod Radhostem, Czech Republic, 2010, pp. 1–10.
28. T. Zhuchkova, S. Aksenov, V. Shkatov, and I. Mazur: J. Chem. Technol. Metall., 2018, vol. 53, pp. 354–9. .
29. I. Rieiro, M. Carsí, and O.A. Ruano: Mater. Sci. Technol., 2009, vol. 25, pp. 995–1002. .10.1179/174328408X369429 ↗
30. M. Erami, A.H. Daei-Sorkhabi, and F. Vakili-Tahami: Int. J. Press. Vessel Pip., 2019, vol. 176, p. 103947. .10.1016/j.ijpvp.2019.103947 ↗
31. E.C. Monkman and N.J. Grant: An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep-Rupture Tests—Proceeding of ASTM. ASTM-International, West Conshohocken, 1956.
32. F. Garofalo: ASTM/STP., 1960, vol. 283, pp. 82–9. .
33. V.L. Sordi and L.O. Bueno: Mater. Sci. Eng. A., 2008, vol. 483–84, pp. 498–501. .10.1016/j.msea.2006.10.194 ↗
34. F. Dobes and K. Milicka: Met. Sci., 1976, vol. 10, pp. 382–4. .10.1080/03063453.1976.11683560 ↗
35. G. Sundararajan: Mater. Sci. Eng. A., 1989, vol. 112, pp. 205–14. .10.1016/0921-5093(89)90360-2 ↗
36. E.I. Samuel, B.K. Choudhary, D.P.R. Palaparti, and M.D. Mathew: Procedia Eng., 2013, vol. 55, pp. 64–9. .10.1016/j.proeng.2013.03.220 ↗
37. C. Phaniraj, B.K. Choudhary, K. Bhanu Sankara Rao, and B. Raj: Scripta Mater., 2003, vol. 48, pp. 1313–8. .10.1016/S1359-6462(03)00021-6 ↗
38. V. Sklenička, K. Kucharová, P. Král, M. Kvapilová, and J. Dvorak: Kov. Mater., 2017, vol. 55, pp. 69–80. .
39. M.F. Ashby and B.F. Dyson: Advances in Fracture Research. Pergamon Press, Oxford, 1984.
40. L.O. Bueno and V.L. Sordi: Mater. Sci. Eng. A., 2008, vol. 483–484, pp. 560–3. .10.1016/j.msea.2006.12.182 ↗
41. L.O. Bueno and J.F.R. Sobrinho: Matéria (Rio J.)., 2012, vol. 17, pp. 1098–108. .10.1590/S1517-70762012000300007 ↗
42. R.E. Schramm and R.P. Reed: Metall. Trans. A., 1975, vol. 6, p. 1345. .10.1007/BF02641927 ↗
43. G.E. Dieter and D.J. Bacon: Mechanical Metallurgy. McGraw-Hill, New York, 1988.
44. M.D. Mathew, K. Laha, and V. Ganesan: Mater. Sci. Eng. A., 2012, vol. 535, pp. 76–83. .10.1016/j.msea.2011.12.044 ↗
45. A.F. Smitll and R. Hales: Met. Sci. J., 1975, vol. 9, pp. 181–4. .10.1179/030634575790444432 ↗