Tensile Properties and Fracture Behavior of ATI 718Plus Alloy at Room and Elevated Temperatures
Source abstract
Abstract
The effect of temperature over the range of ambient to 704 °C and strain rate from 10−4 to 10−2 s−1 on the tensile properties and fracture behavior of ATI 718Plus was investigated. The results showed that with increase in temperature at a strain rate 10−4 s−1, there is a small reduction in the yield strength, but a large drop in ductility at 704 °C. This reduction was accompanied by a change in fracture mode from ductile transgranular to brittle intergranular cracking. Detailed analysis of the microstructure and microchemistry of the areas around the crack using electron microscopy showed that the driving mechanism behind the failure at elevated temperatures and slow strain rates is oxygen-induced intergranular cracking, a dynamic embrittlement mechanism. In addition, the results suggest that the δ precipitates on the grain boundaries tend to oxidize and may facilitate the oxygen-induced intergranular cracking. Finally, an increase in strain rate at 704 °C caused a small increase in the yield strength and a huge increase in ductility. This increase in ductility was accompanied by a change in fracture mode from brittle-to-ductile failure. Possible mechanisms for the deformation, failure mechanisms, and strain rate dependence are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. B.J. Bond, R.L. Kennedy, and C. Work: in Superalloys 718, 625, 706 and Derivatives 2005, E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 203–12.10.7449/2005/Superalloys_2005_203_211 ↗
2. I. Dempster, W. Cao, R. Kennedy, B. Bond, J. Aurrecoechea, and M. Lipschutz: in Superalloys 718, 625, 706 and Derivatives 2005, E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 155–64.10.7449/2005/Superalloys_2005_155_164 ↗
3. M.R. Ahmadi, E. Povoden-Karadeniz, L. Whitmore, M. Stockinger, A. Falahati, and E. Kozeschnik: Mater. Sci. Eng. A, 2014, vol. 608, pp. 114–22.10.1016/j.msea.2014.04.054 ↗
4. K. Schreiber, K. Loehnert, and R.F. Singer: in Second Symposium on Recent Advantages of Nb-Containing Materials in Europe, Essen, Germany, 2006, pp. 1–5.
5. R.L. Kennedy, W. Cao, T.D. Bayha, and R. Jeniski: in Proceedings of the International Symposium on Niobium for High Temperature Applications, Y.-W. Kim and T. Carneiro, eds., TMS (The Minerals, Metals & Materials Society), Araxa, MG, Brasil, 2004, pp. 11–2.
6. R.L. Kennedy: in Superalloys 718, 625, 706 and Various Derivatives (2005), E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 1–14.
7. W. Cao and R.L. Kennedy: Allvac Heat Treat. Recomm., 2006, vol. 28110, pp. 1–17.
8. W.D. Cao: in Superalloys 718, 625, 706 and Various Derivatives (2005), E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 165–77.
9. X. Liu, J. Xu, N. Deem, K.-M. Chang, E. Barbero, W. Cao, R.L. Kennedy, and T. Carneiro: in Superalloys 718, 625, 706 and Derivatives, E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 233–42.10.7449/2005/Superalloys_2005_233_242 ↗
10. R.. Jeniski and R. Kennedy: in Second Symposium on Recent Advances of Nb-Containing Materials in Europe, Essen, Germany, 2006, pp. 1–11.
11. W. Li, D. Terret, and E. McDevitt: in 8th International Symposium on Superalloy 718 and Derivatives, E. Ott, A. Banik, J. Andersson, I. Dempster, T. Gabb, J. Groh, K. Heck, R. Helmink, X. Liu, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2014, pp. 467–84.
12. K. Löhnert and F. Pyczak: in 7th International Symposium on Superalloy 718 and Derivatives, E. Ott, J. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjöberg, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2010, pp. 877–91.
13. M. Hörnqvist, L. Viskari, K. Stiller, and G. Sjöberg: in 7th International Symposium on Superalloy 718 and Derivatives, E. Ott, J. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjöberg, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2010, pp. 705–17.
14. M. Kattoura, S.R. Mannava, D. Qian, and V.K. Vasudevan: Int. J. Fatigue, 2017, vol. 104, pp. 366–78.10.1016/j.ijfatigue.2017.08.006 ↗
15. D.S. Bergstrom, T.D. Bayha, H. Sheet, and C. Sheet: in Superalloys 718, 625, 706 and Derivatives 2005, E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 243–52.10.7449/2005/Superalloys_2005_243_252 ↗
16. X. Xie, C. Xu, G. Wang, J. Dong, W.D. Cao, and R. Kennedy: in Superalloys 718, 625, 706 and Derivatives, E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), Warrendale, Pennsylvania, 2005, pp. 193–202.10.7449/2005/Superalloys_2005_193_202 ↗
17. L. Whitmore, M.R. Ahmadi, M. Stockinger, E. Povoden-Karadeniz, E. Kozeschnik, and H. Leitner: Mater. Sci. Eng. A, 2014, vol. 594, pp. 253–9.10.1016/j.msea.2013.11.037 ↗
18. K.A. Unocic and B.A. Pint: in 8th International Symposium on Superalloy 718 and Derivatives, E. Ott, A. Banik, J. Andersson, I. Dempster, T. Gabb, J. Groh, K. Heck, R. Helmink, X. Liu, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2014, pp. 667–77.
19. B.A. Pint, S. Dryepondt, and K.A. Unocic: in 7th International Symposium on Superalloy 718 and Derivatives, E. Ott, J. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjöberg, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2010, pp. 861–75.
20. K.A. Unocic, R.R. Unocic, B.A. Pint, and R.W. Hayes: in 7th International Symposium on Superalloy 718 and Derivatives, E. Ott, J. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjöberg, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2010, pp. 977–91.
21. X. Liu, S. Rangararan, E. Barbero, K.-M. Chang, W. Cao, R. Kennedy, and T. Carneiro: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 283–90.
22. M.J. Starink and P.A.S. Reed: Mater. Sci. Eng. A, 2008, vol. 491, pp. 279–89.10.1016/j.msea.2008.02.016 ↗
23. R. Jiang, N. Gao, and P.A.S. Reed: J. Mater. Sci., 2015, vol. 50, pp. 4379–86.10.1007/s10853-015-8992-2 ↗
24. R. Jiang and P.A.S. Reed: Mater. Sci. Technol., 2016, vol. 32, pp. 401–6.10.1080/02670836.2016.1148227 ↗
25. R. Jiang, S. Everitt, N. Gao, K. Soady, J.W. Brooks, and P.A.S. Reed: Int. J. Fatigue, 2015, vol. 75, pp. 89–99.10.1016/j.ijfatigue.2015.02.007 ↗
26. E. Andrieu, G. Hochstetter, R. Molins, and A. Pineau: in Superalloys 718,625,706 and Various Derivatives, E.A. Loria, ed., 1994, pp. 619–31.10.7449/1994/Superalloys_1994_619_631 ↗
27. E. Andrieu, R. Cozar, and A. Pineau: in Superalloys 718 Metallurgy and Applications (1989), E.A. Loria, ed., Minerals, Metals & Materials Society, 1989, 1989, pp. 241–56.
28. C.K. Sudbrack, S.L. Draper, T.T. Gorman, J. Telesman, T.P. Gabb, and D.R. Hull: in Superalloys 2012: 12th international Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., Wiley Online Library, Champion, Pennsylvania, 2012, pp. 863–72.
29. T.P. Gabb, J. Telesman, A. Banik, and E. McDevitt: in 8th International Symposium on Superalloy 718 and Derivatives, E. Ott, A. Banik, J. Andersson, I. Dempster, T. Gabb, J. Groh, K. Heck, R. Helmink, X. Liu, and A. Wusatowska-Sarnek, eds., Wiley Online Library, Pittsburgh, Pennsylvania, 2014, pp. 697–712.10.1002/9781119016854.ch54 ↗
30. H.S. Kitaguchi, H.Y. Li, H.E. Evans, R.G. Ding, I.P. Jones, G. Baxter, and P. Bowen: Acta Mater., 2013, vol. 61, pp. 1968–81.10.1016/j.actamat.2012.12.017 ↗
31. S. Pedrazzini, D.J. Child, G. West, S.S. Doak, M.C. Hardy, M.P. Moody, and P.A.J. Bagot: Scr. Mater., 2016, vol. 113, pp. 51–4.10.1016/j.scriptamat.2015.10.001 ↗
32. P. Rodriguez: Bull. Mater. Sci., 1984, vol. 6, pp. 653–63.10.1007/BF02743993 ↗
33. G. Ananthakrishna: Phys. Rep., 2007, vol. 440, pp. 113–259.10.1016/j.physrep.2006.10.003 ↗
34. U. Krupp, W. Kane, J. A. Pfaendtner, L. Xinyu, C. Laird, and C.J. McMahon Jr: Mater. Res., 2004, vol. 7, pp. 35–41.10.1590/S1516-14392004000100006 ↗
35. J.A. Pfaendtner and J.J. McMahon: Acta Mater., 2001, vol. 49, pp. 3369–77.10.1016/S1359-6454(01)00005-2 ↗
36. A.A.N. Nemeth, D.J. Crudden, D.E.J. Armstrong, D.M. Collins, K. Li, A.J. Wilkinson, C.R.M. Grovenor, and R.C. Reed: Acta Mater., 2017, vol. 126, pp. 361–71.10.1016/j.actamat.2016.12.039 ↗
37. R.M. Kearsey, J. Tsang, S. Oppenheimer, and E. McDevitt: in Superalloys 2012: 12th international Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., Wiley Online Library, Champion, Pennsylvania, 2012, pp. 741–9.
38. W.M. Kane and C.J. McMahon: Mater. Sci. Eng. A, 2009, vol. 507, pp. 61–5.10.1016/j.msea.2008.07.015 ↗
39. E. Andrieu, B. Max, and B. Viguier: AerospaceLab, 2015, pp. 1–7.
40. Allegheny Technologies Incorporated: ATI 718Plus ® Technical Data Sheet, vol. 1, 2013.
41. ASTM: in E466-15, West Conshohocken, PA, 2015.
42. ASTM: in E21 - 09, West Conshohocken, PA, 2009.
43. V. Chaswal: University of Cincinnati, 2011.
44. D. Hull, J.D. Bacon, and D. Bacon: Introd. to Dislocations, 2011, vol. 1, p. 257.
45. J. Miao, T.M. Pollock, and J. Wayne Jones: Acta Mater., 2012, vol. 60, pp. 2840–54.10.1016/j.actamat.2012.01.049 ↗
46. A. Pineau and S.D. Antolovich: Eng. Fail. Anal., 2009, vol. 16, pp. 2668–97.10.1016/j.engfailanal.2009.01.010 ↗
47. A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field, eds., 1st edn., Springer, New York, 2009, pp. 301–15.10.1007/978-0-387-88136-2_1 ↗
48. M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh: Acta Mater., 2006, vol. 54, pp. 539–48.10.1016/j.actamat.2005.08.046 ↗
49. A.J. Wilkinson, T.B. Britton, J. Jiang, and P.S. Karamched: IOP Conf. Ser. Mater. Sci. Eng., 2014, vol. 55, p. 012020.10.1088/1757-899X/55/1/012020 ↗