Effect of Strain-Induced Precipitation on the Recrystallization Kinetics in a Model Alloy
Source abstract
Abstract
Abstract The effects of Nb addition on the recrystallization kinetics and the recrystallized grain size distribution after cold deformation were investigated by using Fe-30Ni and Fe-30Ni-0.044 wt pct Nb steel with comparable starting grain size distributions. The samples were deformed to 0.3 strain at room temperature followed by annealing at 950 °C to 850 °C for various times; the microstructural evolution and the grain size distribution of non- and fully recrystallized samples were characterized, along with the strain-induced precipitates (SIPs) and their size and volume fraction evolution. It was found that Nb addition has little effect on recrystallized grain size distribution, whereas Nb precipitation kinetics (SIP size and number density) affects the recrystallization Avrami exponent depending on the annealing temperature. Faster precipitation coarsening rates at high temperature (950 °C to 900 °C) led to slower recrystallization kinetics but no change on Avrami exponent, despite precipitation occurring before recrystallization. Whereas a slower precipitation coarsening rate at 850 °C gave fine-sized strain-induced precipitates that were effective in reducing the recrystallization Avrami exponent after 50 pct of recrystallization. Both solute drag and precipitation pinning effects have been added onto the JMAK model to account the effect of Nb content on recrystallization Avrami exponent for samples with large grain size distributions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. J.J. Jonas, I Weiss. J Mater Sci 13, 238–245 (1979)
2. S.F. Medina, A. Quispe, M. Gomez, Metall Trans A 45A, 1524–1539 (2014)10.1007/s11661-013-2068-1 ↗
3. H. Zurob, C. Hutchinson, Y Brechet and G Purdy. Mater Sci Eng A 382, 64–81 (2004)10.1016/j.msea.2004.04.024 ↗
4. Y.J. Wang, H S Zurob. Appl Phys A 74, 1213–1215 (2002)10.1007/s003390201566 ↗
5. M.J. Jones, F J Humphreys. Acta Mater 51, 2149–2159 (2003)10.1016/S1359-6454(03)00002-8 ↗
6. W. Yang, D Yan and L Rong. Scripta Mater 68, 587–590 (2013)10.1016/j.scriptamat.2012.12.009 ↗
7. Dutta B, Palmiere EJ (2003) Metall Trans A, vol 34, p 1237.10.1007/s11661-003-0234-6 ↗
8. B. Dutta, EJ Palmiere and CM Sellars. Acta Mater 49, 785–794 (2001)10.1016/S1359-6454(00)00389-X ↗
9. P. Cizek, F. Bai, EJ Palmiere and WM Rainforth. J Microsc 217, 138–151 (2005)10.1111/j.1365-2818.2005.01429.x ↗
10. P. Cizek, J.A. Whiteman, WM Rainforth and JH Beynon. J Microsc 213, 285–295 (2004)10.1111/j.0022-2720.2004.01305.x ↗
11. W. Rainforth, M.P. Black, R.L. Higginson, E.J. Palmiere, C.M. Sellars, I. Papst, P Warbichler and F Hofer. Acta Mater 50, 735–747 (2002)10.1016/S1359-6454(01)00389-5 ↗
12. V. Nagarajan, EJ Palmiere and CM Sellars. Mater Sci Technol 25, 1168–1174 (2013)10.1179/174328409X455242 ↗
13. E.J. Palmiere, P. Cizek, F. Bai, R.M. Poths, J. Turner, BP Wynne and WM Rainforth. Mater Manuf Process 26, 127–131 (2011)10.1080/10426910903143472 ↗
14. M.P. Black, Microstructural Evolution of Austenite in a Microalloyed Fe–30Ni Alloy (University of Sheffield, Sheffield, 2002), pp. 118–121
15. Abdollah-Zadeh A (1996) The Investigation of Deformation, Recovery, Recrystallization and Precipitation in Austenitic HSLA Steel Analogue Alloys. University of Wollongong, Wollongong, pp 254-258.
16. D. Poddar, P. Cizek, H Beladi and PD Hodgson. Acta Mater 99, 347–362 (2015)10.1016/j.actamat.2015.08.003 ↗
17. D. Poddar, P. Cizek, H Beladi and PD Hodgson. Acta Mater 80, 1–15 (2014)10.1016/j.actamat.2014.07.035 ↗
18. S. Zaefferer, T Baudin and R Penelle. Acta Mater 49, 1105–1122 (2001)10.1016/S1359-6454(00)00387-6 ↗
19. M. Ji, C Davis and M Strangwood. Metals 9, 1–12 (2019)10.3390/met9030369 ↗
20. S. Vervynckt, K. Verbeken, P Thibaux and Y Houbaert. Mater Sci Eng A 528, 5519–5528 (2011)10.1016/j.msea.2011.03.087 ↗
21. K.B. Kang, O. Kwon, WB Lee and CG Park. Scripta Mater 36, 1303–1308 (1997)10.1016/S1359-6462(96)00359-4 ↗
22. S.S. Hansen, GBV Sande and M Cohen. Metall Trans A 11A, 387–402 (1980)10.1007/BF02654563 ↗
23. M.J. Luton, R Dorvel and RA Petkovic. Metall Trans A 11A, 411–420 (1980)10.1007/BF02654565 ↗
24. K. Mukunthan, EB Hawbolt. Metall Trans A 27, 3410–3423 (1996)10.1007/BF02595434 ↗
25. P.O. Malta, D.S. Alves, A.O.V. Ferreira, I.D. Moutinho, CAP Dias and DB Santos. Metall Trans A 48, 1288–1309 (2017)10.1007/s11661-016-3935-3 ↗
26. M.K. Rehman, HS Zurob. Metall Trans A 44A, 1862–1871 (2013)10.1007/s11661-012-1526-5 ↗
27. R.P. Reed, RE Schramm. J Appl Phys 40, 3453–3458 (1969)10.1063/1.1658218 ↗
28. H.M. Ledbetter, RP Reed. J Phys Chem Ref Data 2, 531–617 (1973)10.1063/1.3253127 ↗
29. M.F. Ashby, D.R.H. Jones, Engineering Materials (Pergamon Press, Oxford, 1980).
30. H. Zurob, CR Hutchinson. Acta Mater 50, 3075–3092 (2002)10.1016/S1359-6454(02)00097-6 ↗
31. B. Dutta, CM Sellars. Mater Sci Technol 3, 197–206 (1987)10.1179/mst.1987.3.3.197 ↗
32. F. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd edn. (Elsevier, Oxford, 2004), pp. 173–220
33. H. Luo, J Sietsma and S van der Zwaag. ISIJ Int 44, 1931–1936 (2004)10.2355/isijinternational.44.1931 ↗
34. O. Kwon, AJ DeArdo. Acta Metall Mater 39, 529–538 (1991)10.1016/0956-7151(91)90121-G ↗
35. R.O. Williams, Acta Metall 9, 949–957 (1961)10.1016/0001-6160(61)90115-8 ↗
36. I. Baker, L. Liu and D. Mandel, 1995, Scripta Mater. Met., vol 32, pp 167-171.10.1016/S0956-716X(99)80031-4 ↗
37. M. Kazeminezhad, Mater Sci Eng A 486, 202–207 (2008)10.1016/j.msea.2007.08.071 ↗
38. H. Zurob, Y. Brechet, G. Purdy, Acta Mater 49, 4183–4190 (2001)10.1016/S1359-6454(01)00315-9 ↗