journal article·2021-04Open access

Understanding the High-Temperature Fatigue Crack Growth from Exceptional Nano-α Phases and {10$$ \bar{1} $$2} Deformation Twins in Hot Deformed Titanium Alloy

Xiaoyan Wang, Yuanfei Han, Xin Su, Shaopeng Li, Guangfa Huang, Jianwei Mao, Weijie Lu

Abstract

Abstract In this study, the fatigue crack growth rate (FCGR) of Ti-6Al-4V alloy at 723 K was measured by direct current potential drop (DCPD) method, and exceptional nano- α phases and {10 $$ \bar{1} $$ \overset{¯}{1} 2} deformation twins were newly found at the crack tip in Ti-6Al-4V alloy. The results showed that nano- α phases have Burgers orientation relationships (OR) (0001) α //(110) β , [ $$ \bar{2} $$ \overset{¯}{2} 110] α //[ $$ \bar{1} $$ \overset{¯}{1} 11] β with β phases. The terraced-structure interface consisted of (0 $$ \bar{1} $$ \overset{¯}{1} 10) α //(1 $$ \bar{1} $$ \overset{¯}{1} 2) β and (10 $$ \bar{1} $$ \overset{¯}{1} 0) α //(1 $$ \bar{1} $$ \overset{¯}{1} 0) β . Numerous dislocations accumulated in the β phase and became the diffused channels of O and V atoms. The α stabilizers (O element) diffused into the crystal lattice and β stabilizers (V element) spread out of the crystal lattice which accelerated the nano- α phases nucleation. < a > and < c + a > dislocations piled up at the primary α grain, interface and low angle grain boundaries (LAGBs), and dissociated into twinning dislocations to promote the twin nucleation. Dislocation transformation enabled nano-twins to grow through the primary α / β interface and strain transfer led that deformation twins nucleated in the adjacent primary α grains. With the effects of nano- α phases, LAGBs and twins, the resistance of crack propagation increased and the driving force decreased, and resulted in the low FCGR. Graphic Abstract
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. 1. R. Banerjee, J. C. Williams (2013) Acta Mater. 61: 844-87910.1016/j.actamat.2012.10.043 ↗
2. J. C. Williams and E. A. Starke: Acta Mater., 2003, vol. 51, pp. 5775–5799.10.1016/j.actamat.2003.08.023 ↗
3. Y. M. Ren, X. Lin, X. Fu, H. Tan, J. Chen and W. D. Huang: Acta Mater., 2017, vol. 132, pp. 82 -95.10.1016/j.actamat.2017.04.026 ↗
4. F. Briffod, A. Bleuset, T. Shiraiwa and M. Enoki: Acta Mater., 2019, vol. 177, pp. 56-67.10.1016/j.actamat.2019.07.025 ↗
5. Y. Mine, S. Katashima, R. Ding, P. Bowen and K. Takashima: Scr. Mater., 2019, vol. 165, pp. 107-11.10.1016/j.scriptamat.2019.02.029 ↗
6. C. Lavogiez, S. Hémery and P. Villechaise: Scr. Mater., 2020, vol. 183, pp. 117-121.10.1016/j.scriptamat.2020.03.031 ↗
7. 7. J. H. Zuo, Z. G. Wang, E. H. Han (2008) Mater. Sci. Eng. A 473:147-15210.1016/j.msea.2007.04.062 ↗
8. J. S. Jha, S. Dhala, S. P. Toppo, R. S. Singh and A. Tewari: Mater. Charact., 2019, vol. 155, pp. 109829.10.1016/j.matchar.2019.109829 ↗
9. 9. X. L. Liu, C. Sun, Y. Hong (2015) Mater. Sci. Eng. A 622:228-23510.1016/j.msea.2014.09.115 ↗
10. K. Tokaji: Scr. Mater., 2006, vol. 54, pp. 2143-2148.10.1016/j.scriptamat.2006.02.043 ↗
11. N. Singh, Gouthama and Vakil Singh: Int. J. Fatigue, 2007, vol. 29, pp. 843-851.10.1016/j.ijfatigue.2006.09.006 ↗
12. N. K. Arakere, T. Goswami, J. Krohn and N. Ramachandran: High Temp. Mater. Processes, 2002, vol. 21, pp. 229-236.10.1515/HTMP.2002.21.4.229 ↗
13. 13. M. P. Echlin, J. CharlesStinville, V. M. Miller, W. C. Lenthe, T. M. Pollock (2016) Acta Mater. 52:164-17510.1016/j.actamat.2016.04.057 ↗
14. P. D. Littlewood and A. J. Wilkinson: Acta Mater., 2012, vol. 60, pp. 5516-5525.10.1016/j.actamat.2012.07.003 ↗
15. S. Xu, M. Gong, Y. Jiang, C. Schuman, J. Lecomte and J. Wang: Acta Mater., 2018, vol. 152, pp. 58-76.10.1016/j.actamat.2018.03.068 ↗
16. L. Wang, P. Eisenlohr, Y. Yang, T. R. Bieler and M. A. Crimp: Scr. Mater., 2010, vol. 63, pp. 827-830.10.1016/j.scriptamat.2010.06.027 ↗
17. H. Qin, J. J. Jonas, H. B. Yu, N. Brodusch, R. Gauvin and X. Y. Zhang: Acta Mater., 2014, vol. 71, pp. 293-305.10.1016/j.actamat.2014.03.025 ↗
18. N. P. Gurao, R. Kapoor and S. Suwas: Acta Mater., 2011, vol. 59, pp. 3431-3446.10.1016/j.actamat.2011.02.018 ↗
19. S. Xu, P. Zhou, G. Liu, D. Xiao, M. Gong and J. Wang: Acta Mater., 2019, vol. 165, pp. 547-560.10.1016/j.actamat.2018.12.017 ↗
20. A. Ishii, J. Li and S. Ogata: Int. J. Plast., 2016, vol. 82, pp. 32–43.10.1016/j.ijplas.2016.01.019 ↗
21. N. Bosh, C. Müller and H. Mozaffari-Jovein: Mater. Charact., 2019, vol. 155, pp. 109810.10.1016/j.matchar.2019.109810 ↗
22. A. Fitzner, D. G. LeoPrakash, J. Q. da Fonseca, M. Thomas, S. Zhang, J. Kelleher, P. Manuel, M. Preuss (2016) Acta Mater. 103:341-35110.1016/j.actamat.2015.09.048 ↗
23. E. Wielewski, C. R. Siviour and N. Petrinic: Scr. Mater., 2012, vol. 67, pp. 229-232.10.1016/j.scriptamat.2012.04.026 ↗
24. X. D. Zheng, S. J. Zheng, J. Wang, Y. J. Ma, H. Wang, Y. T. Zhou, X. H. Shao, B. Zhang, J. F. Lei, R. Yang and X. L. Ma: Acta Mater., 2019, vol. 181, pp. 479-490.10.1016/j.actamat.2019.10.010 ↗
25. A. Chapuis and J.H. Driver: Acta Mater., 2011, vol. 59, pp. 1986-1994.10.1016/j.actamat.2010.11.064 ↗
26. G. G. Yapici, I. Karaman and Z. P. Luo: Acta Mater., 2006, vol. 54, pp. 3755-3771.10.1016/j.actamat.2006.04.007 ↗
27. R.W. Hertzberg, R.P. Vinci and J.L. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, fifth ed., Wiley, Hoboken, 2012.
28. D. Bhattacharyya, G. B. Viswanathan, R. Denkenberger, D. Furrer and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679–4691.10.1016/S1359-6454(03)00179-4 ↗
29. T. Sakamoto, Y. Higaki, S. Kobayashi and K. Nakai: Mater. Sci. Forum, 2010, vol. 638–642, pp. 461–464.10.4028/www.scientific.net/MSF.638-642.461 ↗
30. T. Sakamoto, K. Takiue, Y. Higaki, S. Kobayashi and K. Nakai: Mater. Trans., 2017, vol. 58, pp. 986-992.10.2320/matertrans.M2016382 ↗
31. F. Prima, P. Vermaut, G. Texier, D. Ansel and T. Gloriant: Scr. Mater., 2006, vol. 54, pp. 645–648.10.1016/j.scriptamat.2005.10.024 ↗
32. J. Debuigne and F. Prima: Mater. Trans., 2005, vol. 46, pp. 1433–1435.10.2320/matertrans.46.1433 ↗
33. F. H. Froes, C. F. Yolton, J. M. Capenos, M. G. H. Wells and J. C. Williams: Mater. Trans., 1980, vol. 11, pp. 21-31.
34. K. Yamada, A. Ogawa, C. Ouchi and E. Daniel: Mater. Trans., 2007, vol. 37, pp. 855-59.10.2320/matertrans1989.37.855 ↗
35. C. G. Rhodes and J. C. Williams: Mater. Trans., 1975, vol. 6. pp. 2103-2114.
36. 36. N. Gey, M. Humbert, M. Philippe, Y. Combres (1997) Mater. Sci. Eng. A 230:68-7410.1016/S0921-5093(97)80111-6 ↗
37. D. Qiu, R.Shi, D. Zhang, W. Lu and Y. Wang: Acta Mater., 2015, vol. 88, pp. 218-31.10.1016/j.actamat.2014.12.044 ↗
38. Z. Feng, Y. Yang, B. Huang, X. Luo, M. Li, M. Han and M. Fu: Acta Mater., 2011, vol. 59, pp. 2412-2422.10.1016/j.actamat.2010.12.041 ↗
39. L. Kucherov and E. B. Tadmor: Acta Mater., 2007, vol. 55, pp. 2065-2074.10.1016/j.actamat.2006.10.056 ↗
40. M.A. Meyers, O. Vöhringer and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025-4039.10.1016/S1359-6454(01)00300-7 ↗
41. L. Capolungo, P.E. Marshall, R.J. Mccabe, I.J. Beyerlein and C.N. Tome: Acta Mater., 2009, vol. 57, pp. 6047-6056.10.1016/j.actamat.2009.08.030 ↗
42. M. H. Yoo, J. R. Morris, K. M. Ho and S. R. Agnew: Metall. Mater. Trans. A, 2002, vol. 33, pp. 813-822.10.1007/s11661-002-0150-1 ↗
43. Z. Wu and W. A. Curtin: Nature, 2015, vol. 526, pp. 62-67.10.1038/nature15364 ↗
44. F. Wang and S. R. Agnew: Int. J. Plast., 2016, vol. 81, pp. 63-86.10.1016/j.ijplas.2016.01.012 ↗
45. I. J. Beyerlein, J. Wang, K. Kang, S.J. Zheng and N.A. Mara: Mater. Res. Lett., 2013, vol. 1, pp. 89–95.10.1080/21663831.2013.782074 ↗
46. J. Wang, Q. Zhou, S. Shao and A. Misra: Mater. Res. Lett., 2017, vol. 5, pp. 1–19.10.1080/21663831.2016.1225321 ↗
47. M. R. Barnett, M. D. Nave and A. Ghaderi: Acta Mater., 2012, vol. 60, pp. 1433-1443.10.1016/j.actamat.2011.11.022 ↗
48. J. Tao, S. Hu and L. Ji: Mater. Charact., 2016, vol. 120, pp. 185-194.10.1016/j.matchar.2016.08.029 ↗
49. T. Goswami: Mater. Des., 2003, vol. 24, pp. 423-33.10.1016/S0261-3069(03)00083-9 ↗
50. B. P. Sanders, S. Mall and R. B. Pittman: Compos. Sci. Technol., 1999, vol. 59, pp. 583-591.10.1016/S0266-3538(98)00100-6 ↗
51. A. H. Noroozi, G. Glinka and S. Lambert: Int. J. Fatigue, 2007, vol. 29, pp. 1616-1633.10.1016/j.ijfatigue.2006.12.008 ↗
52. L. Lu, J. Li, C. Y. Su, P. Y. Sun, L. Chang, B. B. Zhou and X. H. He: Thero. Appl. Fract. Mech., 2019, vol. 100, pp. 215-224.10.1016/j.tafmec.2019.01.017 ↗
53. R. Pippan and A. Hohenwarter: Fatigue Fract. Eng. Mater. Struct., 2017, vol. 40, pp. 471-495.10.1111/ffe.12578 ↗
54. Z. J. Zhang, P. Zhang, L. L. Li and Z. F. Zhang: Acta Mater., 2012, vol. 60, pp. 3113-3127.10.1016/j.actamat.2012.02.016 ↗
55. W. Schaef, M. Marx, Acta Mater., 2012, vol. 60, pp. 2425-2436.10.1016/j.actamat.2012.01.013 ↗