journal article·2020-10

Temperature-Dependent Macroscopic Mechanical Behaviors and Their Microscopic Explanations in a Medium Mn Steel

Jiawei Ma, Haiting Liu, Qi Lu, Yong Zhong, Li Wang, Yao Shen

Publisher page

Abstract

Plastic instability (e.g., Luders band and PLC band) is a phenomenon frequently observed in cold-rolled medium Mn steels. In this study, through a number of quasi-static uniaxial tensile tests with digital image correlation (DIC) measurement of the strain rate field, we found the medium Mn steel (Fe-0.14C-7.14Mn-0.23Si wt. pct with approximately 33 vol pct of retained austenite and 67 vol pct of ferrite) exhibited distinct competition/coordination between the Luders band and the PLC band at different deformation temperatures: (1) at 25 °C and 55 °C, a Luders band was followed by several PLC bands; (2) at 100 °C, fracture occurred right after the Luders band formation, without the presence of a PLC band; (3) at 250 °C, only PLC bands were observed. We propose that these macroscopic behaviors can be explained by the temperature-dependent conditions for the formation/appearance and propagation of Luders bands and PLC bands. The propagation of Luders bands becomes difficult when the temperature increases as less hardening is provided by martensitic transformation. In contrast, the appearance and propagation of PLC bands become easier when the temperature increases and/or the plastic strain becomes large (16.5 and 18.9 pct in this material at the deformation temperatures of 25 °C and 55 °C, respectively), as the difference in the average velocities of solute atom diffusion and dislocation gliding is reduced. Either condition for Luders bands or for PLC bands will be satisfied at different deformation temperatures or plastic strains, thus leading to the competition/coordination between them.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. 1. Y.K. Lee and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843-56.10.1179/1743284714Y.0000000722 ↗
2. D.W. Suh and S.J. Kim: Scr. Mater., 2017, vol. 126, pp. 63-67.10.1016/j.scriptamat.2016.07.013 ↗
3. F. Yang, J. Zhou, Y. Han, P. Liu, H.W. Luo and H. Dong: Mater. Lett., 2020, vol. 258, art. no. 126804.10.1016/j.matlet.2019.126804 ↗
4. 4. J. Ma, Q. Lu, L. Sun and Y. Shen: Metall. Mater. Trans. A, 2018, vol. 49, pp. 4404-08.10.1007/s11661-018-4791-0 ↗
5. 5. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5018-24.10.1007/s11661-013-1860-2 ↗
6. 6. F. Yang, H.W. Luo, E.X. Pu, S.L. Zhang and H. Dong: Int. J. Plast., 2018, vol. 103, pp. 188-202.10.1016/j.ijplas.2018.01.010 ↗
7. 7. X.G. Wang and M.X. Huang: J. Iron Steel Res. Int., 2017, vol. 24, pp. 1073-77.10.1016/S1006-706X(17)30156-5 ↗
8. 8. M.H. Zhang, L.F. Li, J. Ding, Q.B. Wu, Y.D. Wang, J. Almer, F.M. Guo and Y. Ren: Acta Mater., 2017, vol. 141, pp. 294-303.10.1016/j.actamat.2017.09.030 ↗
9. M.H. Zhang, Q. Tan, J. Ding, H.Y. Chen, F.M. Guo, Y. Ren and Y.D. Wang: Mater. Sci. Eng. A 2018, vol. 729, pp. 444-51.10.1016/j.msea.2018.05.102 ↗
10. L. Luo, W. Li, L. Wang, S. Zhou and X. Jin: Mater. Sci. Eng. A, 2017, vol. 682, pp. 698-703.10.1016/j.msea.2016.11.017 ↗
11. 11. A. Yilmaz: Sci. Technol. Adv. Mater., 2011, vol. 12, art. no. 063001.10.1088/1468-6996/12/6/063001 ↗
12. 12. B.C. De Cooman, P.J. Gibbs, S. Lee and D.K. Matlock: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2563-72.10.1007/s11661-013-1638-6 ↗
13. 13. J. Han, S.J. Lee, J.G. Jung and Y.K. Lee: Acta Mater., 2014, vol. 78, pp. 369-77.10.1016/j.actamat.2014.07.005 ↗
14. 14. J.W. Ma, H.T. Liu, Q. Lu, Y. Zhong, L. Wang and Y. Shen: Scr. Mater., 2019, vol. 169, pp. 1-5.10.1016/j.scriptamat.2019.04.044 ↗
15. Y. Zhang and H. Ding: Mater. Sci. Eng. A, 2018, vol. 733, pp. 220-23.10.1016/j.msea.2018.07.052 ↗
16. 16. J.H. Ryu, J.I. Kim, H.S. Kim, C.-S. Oh, H.K.D.H. Bhadeshia and D.-W. Suh: Scr. Mater., 2013, vol. 68, pp. 933-36.10.1016/j.scriptamat.2013.02.026 ↗
17. 17. B.H. Sun, N. Vanderesse, F. Fazeli, C. Scott, J.Q. Chen, P. Bocher, M. Jahazi and S. Yue: Scr. Mater., 2017, vol. 133, pp. 9-13.10.1016/j.scriptamat.2017.01.022 ↗
18. 18. F. Abu-Farha, X.H. Hu, X. Sun, Y. Ren, L.G. Hector, G. Thomas and T.W. Brown: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2583-96.10.1007/s11661-018-4660-x ↗
19. 19. X.G. Wang, L. Wang and M.X. Huang: Acta Mater., 2017, vol. 124, pp. 17-29.10.1016/j.actamat.2016.10.069 ↗
20. 20. X.M. Zhao, Y.F. Shen, L.N. Qiu, X. Sun and L. Zuo: Materials, 2014, vol. 7, pp. 7891-906.10.3390/ma7127891 ↗
21. 21. H.F. Jiang, Q.C. Zhang, X.D. Chen, Z.J. Chen, Z.Y. Jiang, X.P. Wu and J.H. Fan: Acta Mater., 2007, vol. 55, pp. 2219-28.10.1016/j.actamat.2006.10.029 ↗
22. 22. R. Sarmah and G. Ananthakrishna: Acta Mater., 2015, vol. 91, pp. 192-201.10.1016/j.actamat.2015.03.027 ↗
23. 23. G.T. Hahn: Acta Metall., 1962, vol. 10, pp. 727-38.10.1016/0001-6160(62)90041-X ↗
24. M. Calcagnotto, D. Ponge, E. Demir and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2738-46.10.1016/j.msea.2010.01.004 ↗
25. 25. A. Ramazani, K. Mukherjee, A. Schwedt, P. Goravanchi, U. Prahl and W. Bleck: Int. J. Plast., 2013, vol. 43, pp. 128-52.10.1016/j.ijplas.2012.11.003 ↗
26. 26. A.H. Cottrell: London, Edinburgh, Dublin Philos. Mag. J. Sci., 1953, vol. 44, pp. 829-32.10.1080/14786440808520347 ↗
27. 27. P.G. McCormigk: Acta Metall., 1972, vol. 20, pp. 351-54.10.1016/0001-6160(72)90028-4 ↗
28. 28. A. van den Beukel: Phys. Status Solidi A, 1975, vol. 30, pp. 197-206.10.1002/pssa.2210300120 ↗
29. 29. R.A. Mulford and U.F. Kocks: Acta Metall., 1979, vol. 27, pp. 1125-34.10.1016/0001-6160(79)90130-5 ↗
30. 30. P.D. Zavattieri, V. Savic, L.G. Hector Jr., J.R. Fekete, W. Tong and Y. Xuan: Int. J. Plast., 2009, vol. 25, pp. 2298-330.10.1016/j.ijplas.2009.02.008 ↗
31. R. Alturk, L.G. Hector, C. MatthewEnloe, F. Abu-Farha and T.W. Brown: JOM, 2018, vol. 70, pp. 894-905.10.1007/s11837-018-2830-3 ↗
32. 32. W. Wu, Y.-W. Wang, P. Makrygiannis, F. Zhu, G.A. Thomas, L.G. Hector, X. Hu, X. Sun and Y. Ren: Materials Science and Engineering: A, 2018, vol. 711, pp. 611-23.10.1016/j.msea.2017.11.008 ↗
33. 33. J. Min, L.G. Hector Jr, L. Zhang, L. Sun, J.E. Carsley and J. Lin: Mater Design, 2016, vol. 95, pp. 370-86.10.1016/j.matdes.2016.01.113 ↗