Evolution of Entrainment Defects Formed in Mg-Y Alloy Castings
Source abstract
Abstract
Entrainment of the oxidized surface of a light alloy melt can result in the entrapment of a doubled-over surface oxide film containing a small quantity of the local atmosphere, forming an entrainment defect (also known as a double oxide film defect) in the final casting, which decreases the reproducibility of the casting. Most previous investigations into these defects were carried out on aluminum alloys, while research into these defects in Mg alloys has been relatively limited. The work reported herein aimed to characterize the behavior of entrainment defects formed in a Mg-Y alloy, under a cover gas of SF6/CO2. The entrainment defects were observed using scanning electron microscopy (SEM) and focused ion beam milling (FIB). A sandwich-like structure that likely corresponds to a deactivated entrainment defect, which has not been reported by previous publications, was discovered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. U.S. Geological Survey: Report No. Mineral Commodity Summaries 2008, U.S. Geological Survey, Reston, VA, 2008.
2. U.S. Geological Survey: Report No. Mineral Commodity Summaries 1996, U.S. Geological Survey, Reston, VA, 1996.
3. U.S. Geological Survey: Report No. Mineral Commodity Summaries 2015, U.S. Geological Survey, Reston, VA, 2015.
4. M. Socjusz-Podosek and L. Litynska: Mater. Chem. Phys., 2003, vol. 80, pp. 472-475.10.1016/S0254-0584(02)00549-7 ↗
5. J. Campbell: Castings. Butterworth-Heinemann, Oxford, 2004.
6. G. E. Bozchaloei, N. Varahram, P. Davami and S. K. Kim: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2012, vol. 548, pp. 99-105.10.1016/j.msea.2012.03.097 ↗
7. X. Cao and J. Campbell: International Journal of Cast Metals Research, 2000, vol. 13, pp. 175-184.10.1080/13640461.2000.11819400 ↗
8. M. Cox, R. A. Harding and J. Campbell: Mater. Sci. Technol., 2003, vol. 19, pp. 613-625.10.1179/026708303225002028 ↗
9. S. Fox and J. Campbell: Scripta Materialia, 2000, vol. 43, pp. 881-886.10.1016/S1359-6462(00)00506-6 ↗
10. A. Ardekhani and R. Raiszadeh: Journal of Materials Engineering and Performance, 2012, vol. 21, pp. 1352-1362.10.1007/s11665-011-9991-3 ↗
11. C. Nyahumwa, N. R. Green and J. Campbell: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2001, vol. 32, pp. 349-358.10.1007/s11661-001-0266-8 ↗
12. X. Dai, X. Yang, J. Campbell and J. Wood: Mater. Sci. Technol., 2004, vol. 20, pp. 505-513.10.1179/026708304225012387 ↗
13. R. Raiszadeh and W. D. Griffiths: J. Alloy. Compd., 2010, vol. 491, pp. 575-580.10.1016/j.jallcom.2009.10.271 ↗
14. R. Raiszadeh and W. D. Griffiths: Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2011, vol. 42, pp. 133-143.10.1007/s11663-010-9439-4 ↗
15. Majid Aryafar, Ramin Raiszadeh and Alireza Shalbafzadeh: J. Mater. Sci., 2010, vol. 45, pp. 3041-3051.10.1007/s10853-010-4308-8 ↗
16. A. R. Mirak, M. Divandari, S. M. A. Boutorabi and J. Campbell: International Journal of Cast Metals Research, 2007, vol. 20, pp. 215-220.10.1179/136404607X256042 ↗
17. W. D. Griffiths and N. W. Lai: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2007, vol. 38A, pp. 190-196.10.1007/s11661-006-9048-7 ↗
18. S. C. Bartos: Magnesium Technology 2001, 2001, pp. 43-47.
19. W. Schwarz, B. Gschrey and O. Recherche, Prepared for European Commission, DG Environment, Frankfurt, 2009.
20. Grand View Research: Report No. GVR-2-68038-309-6, Grand View Research, USA, 2018.
21. Y. BO, K. ROSS, J. ZHU, K. IGUSKY, R. SONG and T. DAMASSA: Report No. OPPORTUNITIES TO ENHANCE NON-CARBON DIOXIDE GREENHOUSE GAS MITIGATION IN CHINA, World Resource Institute, Washington, 2016.
22. U.S.-Geological-Survey: Report No. Mineral Commodity Summaries 2019, U.S. Geological Survey, Reston, Virginia, 2019.
23. U.S.-Geological-Survey: Report No. Mineral Commodity Summaries 2020, U.S. Geological Survey, Reston, Virginia, 2020.
24. B. P. Zhou, W. C. Liu, G. H. Wu, L. Zhang, X. L. Zhang, H. Ji and W. J. Ding: Journal of Materials Science & Technology, 2020, vol. 43, pp. 208-219.10.1016/j.jmst.2020.01.013 ↗
25. H. Zengin: Int. J. Met., 2020, vol. 14, pp. 442-453.
26. S. Q. Yin, W. C. Duan, W. H. Liu, L. Wu, J. M. Yu, Z. L. Zhao, M. Liu, P. Wang, J. Z. Cui and Z. Q. Zhang: Corrosion Sci., 2020, vol. 166, 91-105.
27. X. Y. Qian, Y. Zeng, B. Jiang, Q. R. Yang, Y. J. Wan, G. F. Quan and F. S. Pan: J. Alloy. Compd., 2020, vol. 820, 153.
28. S. X. Ouyang, G. Y. Yang, H. Qin, S. F. Luo, L. Xiao and W. Q. Jie: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2020, vol. 712, 780.
29. Z. D. Ma, Q. Peng, G. B. Wei, Y. Yang, T. C. Xu, W. D. Xie, G. Liu, and X. D. Peng: Met. Mater. Int. (in press)
30. S. F. Luo, G. Y. Yang, H. Qin, L. Xiao, and W. Q. Jie: Adv. Eng. Mater. (in press)
31. Y. H. Jia, J. Hou, H. Wang, Q. C. Le, Q. Lan, X. R. Chen and L. Bao: J. Mater. Process. Technol., 2020, vol. 7, p. 278.
32. S. Ganguly, A. K. Mondal, S. Sarkar, A. Basu, S. Kumar and C. Blawert: Corrosion Sci., 2020, vol. 166,108144.10.1016/j.corsci.2020.108444 ↗
33. A. Abbas and S. J. Huang: Mater. Sci. Eng. A, 2020, vol. 10, 780.
34. H. Dini, N. E. Andersson, and A. E. W. Jarfors: Int. J. Met. (in press)
35. G. Pettersen, E. Ovrelid, G. Tranell, J. Fenstad and H. Gjestland: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2002, vol. 332, pp. 285-294.10.1016/S0921-5093(01)01750-6 ↗
36. S. M. Xiong and X. L. Liu: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2007, vol. 38A, pp. 428-434.10.1007/s11661-006-9035-z ↗
37. T. S. Shih, J. B. Liu and P. S. Wei: Mater. Chem. Phys., 2007, vol. 104, pp. 497-504.10.1016/j.matchemphys.2007.04.010 ↗
38. K. Aarstad: Norwegian University of Science and Technology, 2004.
39. P. Y. Lin, H. Zhou, W. P. Li, W. Li, S. Z. Zhao and J. G. Su: Corrosion Sci., 2009, vol. 51, pp. 1128-1133.10.1016/j.corsci.2009.03.010 ↗
40. A. R. Mirak, C. J. Davidson and J. A. Taylor: J. Magnes. Alloy., 2015, vol. 3, pp. 173-179.10.1016/j.jma.2015.06.003 ↗
41. C. H. Xu and W. Gao: Mater. Res. Innov., 2000, vol. 3, pp. 231-235.10.1007/s100190050008 ↗
42. V. I. Kononenko, A. L. Sukhman, S. L. Gruverman and V. V. Torokin: Phys. Status Solidi A-Appl. Res., 1984, vol. 84, pp. 423-432.10.1002/pssa.2210840210 ↗
43. A. Aykul, I. Kutbay, Z. Evis and M. Usta: Ceram. Int., 2013, vol. 39, pp. 7869-7877.10.1016/j.ceramint.2013.03.048 ↗
44. S.P. Cashion, N.J. Ricketts and P.C. Hayes: Journal of Light Metals, 2002, vol. 2, pp. 43-47.10.1016/S1471-5317(02)00012-3 ↗
45. S. H. Wang, Y. Wang, Q. Ramasse and Z. Y. Fan: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., vol. 51, pp. 2957 - 2974.10.1007/s11661-020-05740-1 ↗
46. J. F. Fan, Ch L. Yang, G. Han, S. Fang, W. D. Yang and B. S. Xu: J. Alloy. Compd., 2011, vol. 509, pp. 2137-2142.10.1016/j.jallcom.2010.10.168 ↗
47. B. D. Lee, U. H. Beak, K. W. Lee, G. S. Han and J. W. Han: Mater. Trans., 2013, vol. 54, pp. 66-73.10.2320/matertrans.M2012057 ↗
48. C. Zheng, B. R. Qin, X. B. Lou and Asme: Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (Mimt 2010), 2010, pp. 383-388.
49. S. M. Xiong and X. F. Wang: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 1228-1234.10.1016/S1003-6326(09)60283-1 ↗
50. K. Aarstad, G. Tranell, G. Pettersen and T. A. Engh: Magnesium Technology 2003, 2003, pp. 5-10.
51. X. F. Wang and S. M. Xiong: Corrosion Sci., 2013, vol. 66, pp. 300-307.10.1016/j.corsci.2012.09.033 ↗
52. W. Z. Liang, Q. Gao, F. Chen, H. H. Liu and Z. H. Zhao: China Foundry, 2012, vol. 9, pp. 226-230.
53. L. Peng, G. Zeng, T. C. Su, H. Yasuda, K. Nogita and C. M. Gourlay: Jom, 2019, vol. 71, pp. 2235-2244.10.1007/s11837-019-03471-2 ↗
54. M. Paradis, A. M. Samuel, F. H. Samuel and H. W. Doty: Int. J. Met., 2018, vol. 12, pp. 2-19.
55. S. L. Sin, A. Elsayed and C. Ravindran: Int. Mater. Rev., 2013, vol. 58, pp. 419-436.10.1179/1743280413Y.0000000017 ↗
56. J. M. Tartaglia and J. C. Grebetz: Magnesium Technology 2000, 2000, pp. 113-121.
57. R. L. Wilkins: J. Chem. Phys., 1969, vol. 51, p. 853.10.1063/1.1672089 ↗
58. S. Hayashi, W. Minami, T. Oguchi and H. J. Kim: Kag. Kog. Ronbunshu, 2009, vol. 35, pp. 411-415.10.1252/kakoronbunshu.35.411 ↗
59. O. Kubaschewski and K. Hesselemam: Thermo-chemical properties of Inorganic Substances. Springer-Verlag, Belin, 1991.
60. P. Patnaik: Handbook of Inorganic Chemicals. McGraw-Hill, New York, 2002.
61. H. S. Jiang, M. Y. Zheng, X. G. Qiao, K. Wu, Q. Y. Peng, S. H. Yang, Y. H. Yuan and J. H. Luo: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2017, vol. 684, pp. 158-164.10.1016/j.msea.2016.11.009 ↗
62. J. F. Fan, G. C. Yang, S. L. Cheng, H. Xie, W. X. Hao, M. Wang and Y. H. Zhou: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2005, vol. 36A, pp. 235-239.10.1007/s11661-005-0155-7 ↗
63. X. F. Huang, H. Zhou and Z. M. He: J. Rare Earths, 2003, vol. 21, pp. 73-76.
64. M. J. Balart and Z. Fan: International Journal of Cast Metals Research, 2014, vol. 27, pp. 301-311.10.1179/1743133614Y.0000000115 ↗