journal article·2020-09

Effect of Cooling Rate on Carbide Banding in High-Chromium Bearing Steel After Spheroidization

Hong-Yi Wu, Yen-Hao Frank Su, Guan-Ru Lin, Jui-Chao Kuo

Publisher page

Abstract

This study investigated the effect of cooling rate on the formation of carbide bands in hot-rolled SUJ2 steel after spheroidization. The metallographic microstructure was observed under an optical microscope and a scanning electron microscope with an electron backscatter diffractometer, and the distribution of the chemical composition was analyzed using a field emission electron probe. Experimental results show the formation of carbide banding and the effect of cooling rate. Cr segregation occurs in carbide banding, in which C content increases after austenitization and spheroidization. The area fraction of carbide in the band region is larger than that in the normal region. Increasing the cooling rate can restrain the diffusion of C into the Cr microsegregation band. The formation of carbide banding can be avoided at a high cooling rate. This phenomenon may aid in quantifying the processing parameter of the cooling rate to improve the quality and the lifetime of bearings for bearing steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. [2] J.D. Verhoeven: J. Mater. Eng. Perform. 2000; vol. 9, pp. 286-96.10.1361/105994900770345935 ↗
2. [5] H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2012, vol. 57, pp. 268-435.10.1016/j.pmatsci.2011.06.002 ↗
3. [6] A. Pokorny, J. Pokorny: De Ferri Metallographia, Solidification and Deformation of Steels; Berger-Lerrault, Paris, 1967; Vol. 3, pp 95-103.
4. [7] J.E. Stead: J. Soc. Chem. Ind. 1913, vol. 33, pp. 173-84.10.1002/jctb.5000330405 ↗
5. [8] J.E. Stead: J. Iron Steel Inst., 1915, vol. 91, pp. 140-81.
6. [9] J.S. Kirkaldy, J. von Destinon-Forstmann, R.J. Brigham: Can. Metall. Q., 1962, vol. 1, pp. 59-81.10.1179/cmq.1962.1.1.59 ↗
7. [10] C.F. Jatczak, D.J. Girardi, E.S. Rowland: Trans. ASM, 1956, vol. 48, pp. 279-305.
8. [11] P.G. Bastien: J. Iron Steel Inst., 1957, vol. 187, pp. 281-91.
9. Walker PFF, Kerrigan A, Green M, Cardinal N, Connell J, Rivera-Díaz-del-Castillo PEJ (2015) In: Beswick J (ed) Bearing Steel Technologies in Advances in Steel Technologies for Rolling Bearings. ASTM International, West Conshohocken, pp 54-80.10.1520/STP158020140104 ↗
10. [13] C. Hays and R.P. Stemmler: J. Mater. Eng. Perform., 2000, vol. 9, pp. 147-52.10.1361/105994900770346088 ↗
11. [14] F.G. Caballero, A. García-Junceda, C. Capdevila and C. García de Andrés: Mater. Trans., 2006, vol. 47, pp. 2269-76.10.2320/matertrans.47.2269 ↗
12. [15] S. Deldar, H. Mirzadeh, M.H. Parsa: Eng. Fail. Anal., 2016, vol. 68, pp. 132–37.10.1016/j.engfailanal.2016.06.001 ↗
13. [16] M. Maalekian, H. Azizi-Alizamini, M. Militzer: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 608-22.10.1007/s11661-015-3225-5 ↗
14. [17] K. Wang, T. Yu, Y. Song, H.X. Li, M.D. Liu, R. Luo, J.Y. Zhang, F.S. Fang and X.D. Lin: Metall. Mater. Trans. B, 2019, vol. 50B, pp. 1213-24.10.1007/s11663-019-01532-0 ↗
15. [18] T.A. Kop, J. Sietsma, and S. van der Zwaag: Mater. Sci. Technol., 2001, vol. 17, pp. 1569-74.10.1179/026708301101509629 ↗
16. [19] B.L. Ennis, E. Jimenez-Melero, R. Mostert, B. Santillana, P.D. Lee: Acta Mater., 2016, vol. 115, pp.132-42.10.1016/j.actamat.2016.05.046 ↗
17. [20] S.E. Offerman, N.H. van Dijk, M.Th. Rekveldt, J. Sietsma, S. van der Zwaag: Mater. Sci. Technol., 2002, vol. 18, pp. 297-303.10.1179/026708301225000752 ↗
18. [21] C.A. Stickels: Metall. Trans., 1974, vol. 5, pp. 865-74.10.1007/BF02643140 ↗
19. [22] D. Chae, D. Koss, A. Wilson, P. Howell: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 995-1005.10.1007/s11661-000-1017-y ↗
20. [23] G. Krauss: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 781-92.10.1007/s11663-003-0084-z ↗
21. [24] A. Stauffer, D. Koss, J. McKirgan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1317-24.10.1007/s11661-004-0306-2 ↗
22. [25] Y.K. Sun, D. Wu: J. Iron Steel Res. Int. 2009, vol. 16, pp. 61-80.10.1016/S1006-706X(10)60012-X ↗
23. [26] X.Q. Wu, Y. Katada: Corrosion, 2004, vol. 60, pp. 1045-57.10.5006/1.3299218 ↗
24. [1] L. Hellner, T.O. Norrman: Jernkontorets Ann., 1968, vol. 152, pp. 269-86.
25. [27] S.J. Lee, D.K. Matlock, C.J. Van Tyne: Scripta Mater., 2011, vol. 64, pp. 805-08.10.1016/j.scriptamat.2011.01.001 ↗
26. [28] T. Malinovskaya, A. Kurasov, G.V. Glaskova, Y.I. Spektor: Met. Sci. Heat Treat., 1975, vol. 17, pp. 609-10.10.1007/BF00680413 ↗
27. [29] K. Barui, B. Bhattacharyya: J. Mater. Sci. Lett., 1985, vol. 4, pp. 685-87.10.1007/BF00726961 ↗
28. [30] M. Flemings: Mod. Cast., 1964, vol. 46, pp. 353-62.
29. [31] I. Minkoff, Solidification and Cast Structure, Wiley, New York, 1986, pp 7–12.
30. [32] S.J. Lee, D.K. Matlock and C.J. Van Tyne: ISIJ Int., 2011, vol. 51, pp. 1903-11.10.2355/isijinternational.51.1903 ↗
31. [33] A. Salimi, H. M. Zadeh, M. R. Toroghinejad, D. Asefi, and A. Ansaripour: Mater. Technol., 2013, vol. 47, pp. 385-89.
32. [34] Y. Numata, H. Shibata, H. Nishiyama, T. Nakata, T. Kasugai, H. Katou: J-STAGE, 2007, vol. 79, pp. 367-73.
33. [35] H.C.H. Carpenter, J.M. Robertson: J. Iron Steel Inst., 1933, vol. 127, pp. 259-84.
34. [36] H.C.H. Carpenter, J.M. Robertson: J. Iron Steel Inst., 1931, vol. 123, pp. 345-79.
35. [37] W. Peter and H. Finkler: Härt.-tech. Mitt., 1961, vol. 16, pp. 51-60.