journal article·2020-07Open access

Occurrence and Morphology of Martensite in β-Cu-Zn Alloys with Minor Al Additions

T. Kaaden, P. Wutzler, S. Lippmann

Abstract

Abstract The limits of occurrence and the morphology of martensite in Cu-Zn-Al alloys with 30 to 50 wt pct Zn and ≤ 1.5 wt pct Al have been investigated. In samples with concentration gradients, various conditions for the competition between martensitic and massive transformation have been observed. Microstructural details of martensite were obtained by combining vibration polishing, chemical or plasma etching and polarized light, backscattered electron channeling contrast or electron backscatter diffraction analysis. Depending on the cooling rate, martensite undergoes a morphological change from self-accommodating thin plates to lenticular shaped plates, which is documented for the first time in Cu-based alloys. The number of martensite twins in the investigated compositional range was found to be significantly smaller than that in commercial Cu-Zn-Al alloys that are used as shape memory alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A.J. Philips: Trans. Metall. Soc. AIME, 1930, vol. 89, pp. 194–200.
2. J.W. Cahn, M. Cohen and D.A. Karlyn, Trans. Metall. Soc. AIME, 1969, vol. 245, pp. 197-207.
3. T.B. Massalski: Metall. Mater. Trans. A, 2002, vol. 33, pp. 2277-2283.10.1007/s11661-002-0351-7 ↗
4. V. Asanović, K. Delijić and N. Jauković: Scr. Mater., 2008, vol. 58, pp. 599-601.10.1016/j.scriptamat.2007.11.033 ↗
5. T. Saburi and C.M. Wayman: Acta Metall., 1979, vol. 27, pp. 979-995.10.1016/0001-6160(79)90186-X ↗
6. M.A. Jaswon and J.A. Wheeler: Acta Crystallogr. 1948, vol. 1, pp. 216-224.10.1107/S0365110X48000582 ↗
7. E.R. Petty: Martensite: fundamentals and technology, Longman, Harlow, GB-ESS, 1970, pp. 101-102
8. M. Ahlers: Prog. Mater. Sci., 1986, vol. 30, pp. 135-186.10.1016/0079-6425(86)90007-1 ↗
9. R. Zengin and N. Kayal: Acta Phys. Pol. A, 2010, vol. 118, pp. 619-622.10.12693/APhysPolA.118.619 ↗
10. Z. Stošić, D. Manasijevi, L. Balanovi, T. Holjevac-Grguri, U. Stamenkovi, M. Premovi, D. Mini, M. Gorgievski and R. Todorovi: Mater. Res., 2017, vol. 20, pp. 1425-1431.10.1590/1980-5373-mr-2017-0153 ↗
11. K. Adachi, J. Perkins and C.M. Wayman: Acta Metall., 1986, vol. 34, pp. 2471-2485.10.1016/0001-6160(86)90150-1 ↗
12. T. Maki: Phase Transform. Steels, 2012, vol. 2, pp. 34-58.10.1533/9780857096111.1.34 ↗
13. K. Bhattacharya: Arch. Ration. Mech. Anal., 1992, vol. 120, pp. 201-244.10.1007/BF00375026 ↗
14. M.J. Perricone: Book Chapter: Massive Transformation Structures in ASM Handbook Metallography and Microstructures 9, ASM International, Materials Park, US-OH, 2004, pp. 148-151.
15. H. Pops and T.B. Massalski: Trans. Metall. Soc. AIME, 1964, vol. 230, pp. 1662-1668.
16. R. Dasgupta:, J. Mater. Res., 2014, vol. 29, pp. 1681-1698.10.1557/jmr.2014.189 ↗
17. W. Huang: Mater. Des., 2002, vol. 23, pp. 11-19.10.1016/S0261-3069(01)00039-5 ↗
18. S. Lippmann, T. Kaaden, P. Wutzler and M. Rettenmayr: Materialia, 2019, 7, 100367:1-7.
19. A. Undisz, K. E. Freiberg, A. Seide, T. Koenen and M. Rettenmayr: Prakt. Metallogr., 2016, vol. 53, pp. 86-97.10.3139/147.110376 ↗
20. S.M. Liang and R. Schmid-Fetzer: CALPHAD: Comput. Coupling Phase Diagrams and Thermochem., 2016, vol. 52, pp. 21-37.10.1016/j.calphad.2015.11.001 ↗
21. E. Hornbogen and H. Warlimont: Metalle - Struktur und Eigenschaften der Metalle und Legierungen, 6th ed., Springer Vieweg, Berlin, DE-BE, 2016, p. 193.10.1007/978-3-662-47952-0 ↗
22. D.Z. Yang, M. Zhu, M. Qi and G.B. Li: Scr. Metall., 1986, vol. 20, pp.1717-1720.10.1016/0036-9748(86)90276-0 ↗
23. F.C. Lovey, J. Ferron, L.S. De Bernardez and M. Ahlers: Scr. Metall., 1983, vol. 17, pp. 501-504.10.1016/0036-9748(83)90340-X ↗
24. E.-S. Lee, S. Ahn: Acta Mater., 1998, vol. 46, pp. 4357-4368.10.1016/S1359-6454(98)00091-3 ↗
25. L.H. Beck, C.S. Smith: Trans. Amer. Inst. Mining, Metall. Petroleum Eng., 1952, vol. 194, pp. 1079–83.
26. S. Chakravorty, C.M. Wayman: Acta Metall., 1977, vol. 25, pp. 989-1000.10.1016/0001-6160(77)90127-4 ↗
27. D.W. Roh, E.-S. Lee and Y. G. Kim: Metall. Trans. 1992, vol. 23A, pp. 2753-2760.10.1007/BF02651754 ↗
28. D.N. Adnyana: Metallography, 1986, vol. 19, pp. 187-196.10.1016/0026-0800(86)90034-0 ↗
29. J. Wu, B. Jiang and T.Y. Hsu: Acta Metall., 1988, vol. 36, pp. 1521-1526.10.1016/0001-6160(88)90219-2 ↗