journal article·2020-04

Isothermal Phase Transformations in a Low Carbon Steel During Single and Two-Step Partitioning

F. M. Castro Cerda, E. I. Hernández, T. Ros-Yanez, R. H. Petrov

Publisher page

Abstract

Single and two-step heat treatments were performed on hot-rolled 0.2C-2Mn-1.4Si-0.3Mo steel. The microstructure was characterized by means of optical and scanning electron microscopy and X-ray diffraction measurements. The results showed that the main microstructural components are tempered martensite, bainite, and retained austenite. The thermodynamic analysis showed that the constrained carbon equilibrium in the presence of cementite CCEθ model fits the experimental data for the isothermal heat treatment at a temperature slightly below the MS, despite the fraction of bainite in the microstructure. The existing models for predicting the equilibrium between martensite and austenite (i.e., constrained carbon equilibrium CCE and CCEθ) seems to overestimate the austenitic carbon content well below the MS. Equilibrium calculations between tempered martensite and austenite showed fair agreement with the experimental values for large martensite fractions. For small fractions, it is proposed that local equilibrium (LE) conditions during bainitic transformation govern the final stage of both single and two-phase heat treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. 1 E. De Moor, P.J. Gibbs, J.G. Speer, D.K. Matlock, and A.S. Processing: AIST Trans., 2015, vol. 7, p. 2010.
2. 2 J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
3. 3 J.G. Speer, D. V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
4. 4 H.Y. Li, X.W. Lu, X.C. Wu, Y.A. Min, and X.J. Jin: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6255–9.10.1016/j.msea.2010.06.045 ↗
5. 5 J.G. Speer, E. De Moor, K.O. Findley, D.K. Matlock, B.C. De Cooman, and D. V Edmonds: Metall. Mater. Trans. A, 2011, vol. 42, p. 3591.10.1007/s11661-011-0869-7 ↗
6. 6 S. Samanta, S. Das, D. Chakrabarti, I. Samajdar, S.B. Singh, and A. Haldar: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5653–64.10.1007/s11661-013-1929-y ↗
7. 7 F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, and M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72–83.10.1016/j.actamat.2015.11.032 ↗
8. 8 E.J. Seo, L. Cho, and B.C. De Cooman: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3797–802.10.1007/s11661-016-3579-3 ↗
9. 9 S. Chen, G. Wang, C. Liu, C. Wang, X. Zhao, and W. Xu: J. Iron Steel Res. Int., 2017, vol. 24, pp. 1095–103.10.1016/S1006-706X(17)30159-0 ↗
10. 10 Z. Dai, R. Ding, Z. Yang, C. Zhang, and H. Chen: Acta Mater., 2018, vol. 144, pp. 666–78.10.1016/j.actamat.2017.11.025 ↗
11. 11 A.S. Nishikawa, M.J. Santofimia, J. Sietsma, and H. Goldenstein: Acta Mater., 2018, vol. 142, pp. 142–51.10.1016/j.actamat.2017.09.048 ↗
12. 12 Y. Toji, H. Matsuda, M. Herbig, P.-P. Choi, and D. Raabe: Acta Mater., 2014, vol. 65, pp. 215–28.10.1016/j.actamat.2013.10.064 ↗
13. 13 Y. Toji, G. Miyamoto, and D. Raabe: Acta Mater., 2015, vol. 86, pp. 137–47.10.1016/j.actamat.2014.11.049 ↗
14. 14 D.T. Pierce, D.R. Coughlin, D.L. Williamson, J. Kähkönen, A.J. Clarke, K.D. Clarke, J.G. Speer, and E. De Moor: Scr. Mater., 2016, vol. 121, pp. 5–9.10.1016/j.scriptamat.2016.04.027 ↗
15. 15 B. Kim, J. Sietsma, and M.J. Santofimia: Mater. Des., 2017, vol. 127, pp. 336–45.10.1016/j.matdes.2017.04.080 ↗
16. 16 M.J. Santofimia, R.H. Petrov, L. Zhao, and J. Sietsma: Mater. Charact., 2014, vol. 92, pp. 91–5.10.1016/j.matchar.2014.03.003 ↗
17. 17 L. Lutterotti, S. Matthies, H.-R. Wenk, A.S. Schultz, and J.W. Richardson: J. Appl. Phys., 1997, vol. 81, pp. 594–600.10.1063/1.364220 ↗
18. 18 M.J. Dickson: J. Appl. Crystallogr., 1969, vol. 2, pp. 176–80.10.1107/S0021889869006881 ↗
19. 19 M.-X. Zhang, P.M. Kelly, L.K. Bekessy, and J.D. Gates: Mater. Charact., 2000, vol. 45, pp. 39–49.10.1016/S1044-5803(00)00044-9 ↗
20. 20 C.S. Roberts: Trans. AIME, 1953, vol. 197, pp. 203–4.
21. 21 M. Hillert and J. Ågren: Scr. Mater., 2004, vol. 50, pp. 697–9.10.1016/j.scriptamat.2003.11.020 ↗
22. 22 J.G. Speer, D.K. Matlock, B.C. DeCooman, and J.G. Schroth: Scr. Mater., 2005, vol. 52, pp. 83–5.10.1016/j.scriptamat.2004.08.029 ↗
23. 23 M. Hillert and J. Ågren: Scr. Mater., 2005, vol. 52, pp. 87–8.10.1016/j.scriptamat.2004.08.026 ↗
24. 24 G.R. Speich: Trans. AIME, 1969, vol. 245, pp. 2553–64.
25. 25 G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
26. 26 J.M. Oblak and R.F. Hehemann: in Transformation and Hardenability in Steels, Climax Molibdenum Company of Michigan, Ann Arbor, MI, 1967, pp. 15–30.
27. 27 J.W. Christian: The Theory of Transformations in Metals and Alloys, 3rd ed., ELSEVIER SCIENCE Ltd, Oxford, UK, 2002.
28. M. Hillert: Intern. Rep. Swedish Inst. Met. Reserch.
29. L. Kaufman, S.V. Radcliffe, and M. Cohen: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., The Metallurgical Society of AIME, London, 1962, pp. 313–52.
30. H.I. Aaronson: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Metallurgical Society of AIME, 1962.
31. 31 H.K.D.H. Bhadeshia: Bainite in Steels, Maney Publishing, Wakefield, UK, 2015.
32. 32 M. Hillert: Metall. Mater. Trans. A, 1994, vol. 25, pp. 1957–66.10.1007/BF02649044 ↗
33. 33 J. Wang, P.J. van der Wolk, and S. van der Zwaag: ISIJ Int., 1999, vol. 39, pp. 1038–46.10.2355/isijinternational.39.1038 ↗