journal article·2020-03

Influence of Pore Size and Crystallography on the Small Crack HCF Behavior of an A357-T6 Cast Aluminum Alloy

I. Serrano-Munoz, S. Dancette, C. Verdu, J.-Y. Buffiere

Publisher page

Abstract

The high-cycle fatigue, small crack propagation behavior of an A357-T6 cast aluminum alloy is investigated. Laboratory X-ray micro-computed tomography $$(\mu {\text {CT}})$$ is used to assist in the manufacturing of two flat fatigue specimens containing subsurface shrinkage pores of different sizes (Pore 1 $$\sqrt{A} = 522\,\mu {\text {m}}$$ against Pore 2 $$\sqrt{A} = 280\,\mu {\text {m}}$$). Surface crack monitoring is performed by means of optical microscopy and the cracked specimens are analyzed via scanning electron microscopy and electron backscatter diffraction techniques. The subsurface pores tend to induce intergranular crack nucleation, principally when the grain boundaries are oriented perpendicular to the loading direction. Pore 1 induces a fatigue life reduction of 500.000 cycles when compared to Pore 2. The crystallography is able to influence small crack propagation by slightly decelerating the crack growth rates as well as by altering the crack path topography. Tailoring of the crystallography for improved fatigue resistance requires an investigation of the optimal largest defect to grain size ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. M.J. Couper, A.E. Neeson, and J.R. Griffiths: FFEMS, 1990, vol. 13, p. 213.
2. B. Skallerud, T. Iveland, and G. Haerkegard: Eng. Fract. Mech., 1993, vol. 44, p. 857.10.1016/0013-7944(93)90108-5 ↗
3. J. Odegård and K. Pedersen: Technical Paper 940811, SAE International, 1994.
4. B. Zhang, D. Poirier, and W. Chen: Mater. Sci. Eng. A, 1999, vol. 30, p. 2659.
5. Q. Wang, D. Apelian, and D. Lados: J. Light Met., 2001, vol. 1, p. 73.10.1016/S1471-5317(00)00008-0 ↗
6. J.Y. Buffiere, S. Savelli, P. Jouneau, E. Maire, and R. Fougeres: Mater. Sci. Eng. A, 2001, vol. 316, p. 115.10.1016/S0921-5093(01)01225-4 ↗
7. H. Mayer, M. Papakyriacou, B. Zettl, and S. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25, p. 245.10.1016/S0142-1123(02)00054-3 ↗
8. Y.X. Gao, J.Z. Yi, P.D. Lee, and T.C. Lindley: FFEMS, 2004, vol. 27, p. 559.
9. J. Yi, P. Lee, T. Lindley, and T. Fukui: Mater. Sci. Eng. A, 2006, vol. 432, p. 59.10.1016/j.msea.2006.07.003 ↗
10. H. Ammar, A. Samuel, and F. Samuel: Mater. Sci. Eng. A, 2008, vol. 473, p. 65.10.1016/j.msea.2007.03.112 ↗
11. X. Zhu, A. Shyam, J. Jones, H. Mayer, J. Lasecki, and J. Allison: Third Int. Conf. Very High Cycle Fatigue (VHCF-3).
12. P. Li, P. Lee, D. Maijer, and T. Lindley: Acta Mater., 2009, vol. 57, p. 3539.10.1016/j.actamat.2009.04.008 ↗
13. M. Brochu, Y. Verreman, F. Ajersch, and D. Bouchard: Int. J. Fatigue, 2010, vol. 32, p. 1233.10.1016/j.ijfatigue.2010.01.001 ↗
14. N. Vanderesse, E. Maire, A. Chabod, and J.Y. Buffiere: Int. J. Fatigue, 2011, vol. 33, p. 1514.10.1016/j.ijfatigue.2011.06.010 ↗
15. I. Serrano-Munoz, J.Y. Buffiere, C. Verdu, Y. Gaillard, P. Mu, and Y. Nadot: Int. J. Fatigue, 2016, vol. 82, p. 361.10.1016/j.ijfatigue.2015.07.032 ↗
16. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, 2003.
17. J. Schijve: Fatigue of Structures and Materials, Springer, Dordrecht, 2009.10.1007/978-1-4020-6808-9 ↗
18. A. Pineau, D.L. McDowell, E.P. Busso, and S.D. Antolovich: Acta Mater., 2016, vol. 107, p. 484.10.1016/j.actamat.2015.05.050 ↗
19. D. McDowell, K. Gall, M. Horstemeyer, and J. Fan: Eng. Fract. Mech., 2003, vol. 70, p. 49.10.1016/S0013-7944(02)00021-8 ↗
20. T. Zhai, A. Wilkinson, and J. Martin: Acta Mater., 2000, vol. 48, p. 4917.10.1016/S1359-6454(00)00214-7 ↗
21. W. Ludwig, J. Buffiere, S. Savelli, and P. Cloetens: Acta Mater., 2003, vol. 51, p. 585.10.1016/S1359-6454(02)00320-8 ↗
22. E. Ferrie, J.Y. Buffiere, and W. Ludwig: Int. J. Fatigue, 2005, vol. 27, p. 1215.10.1016/j.ijfatigue.2005.07.015 ↗
23. W. Schaef, M. Marx, H. Vehoff, A. Heckl, and P. Randelzhofer: Acta Mater., 2011, vol. 59, p. 1849.10.1016/j.actamat.2010.11.051 ↗
24. S. Siegfanz, A. Giertler, W. Michels, and U. Krupp: Mater. Sci. Eng. A, 2013, vol. 565, p. 21.10.1016/j.msea.2012.12.047 ↗
25. U. Krupp, A. Giertler, S. Siegfanz, and W. Michels: Key Eng. Mater., 2013, vol. 592, p. 393.10.4028/www.scientific.net/KEM.592-593.393 ↗
26. K.J. Miller: . Fatigue Eng. Mater. Struct., 1982, vol. 5, p. 223.10.1111/j.1460-2695.1982.tb01250.x ↗
27. K.J. Miller: Mater. Sci. Technol., 1993, vol. 9, p. 453.10.1179/mst.1993.9.6.453 ↗
28. K. Shiozawa, Y. Tohda, and S.M. Sun: FFEMS, 1997, vol. 20, p. 237.
29. Y. Murakami and M. Endo: Int. J. Fatigue, 1994, vol. 16, p. 163.10.1016/0142-1123(94)90001-9 ↗
30. I. Serrano-Munoz, J.Y. Buffiere, and C. Verdu: Int. J. Fatigue, 2018, vol. 117, p. 471.10.1016/j.ijfatigue.2018.08.019 ↗
31. I. Serrano-Munoz, J.Y. Buffiere, R. Mokso, C. Verdu, and Y. Nadot: Sci. Rep., 2017, vol. 7, p. 45239.10.1038/srep45239 ↗
32. Q. Wang, D. Apelian, and D. Lados: J. Light Met., 2001, vol. 1, p. 85.10.1016/S1471-5317(00)00009-2 ↗
33. K. Gall, N. Yang, M. Horstemeyer, D.L. McDowell, and J. Fan: FFEMS, 2000, vol. 23, p. 159.
34. R. Carter, E. Lee, E. Starke, and C. Beevers: Metall. Trans. A, 1984, vol. 15, p. 555.10.1007/BF02644980 ↗
35. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, p. 676. EP Perspective.10.1038/nmeth.2019 ↗
36. ARP1947A: Aerospace Recommended Practice, SAE International Group, 2007.
37. HKL-Technology: HKL Channel 5 Users Manual, HKL-Technology, Danbury, CT, 2001.
38. I. Serrano-Munoz: Influence of Casting Defects on the Fatigue Behaviour of an A357-T6 Aerospace Alloy. Ph.D. Thesis, INSA de Lyon, 2014.
39. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plast., 2005, vol. 21, p. 589.10.1016/j.ijplas.2004.04.011 ↗
40. L. Delannay, M. Melchior, J. Signorelli, J.F. Remacle, and T. Kuwabara: Comput. Mater. Sci., 2009, vol. 45, p. 739.10.1016/j.commatsci.2008.06.013 ↗
41. S. Dancette, L. Delannay, T. Jodlowski, and J. Giovanola: Int. J. Mater. Form., 2010, vol. 3, p. 251.10.1007/s12289-010-0754-8 ↗
42. S. Dancette, L. Delannay, K. Renard, M. Melchior, and P. Jacques: Acta Mater., 2012, vol. 60, p. 2135.10.1016/j.actamat.2012.01.015 ↗
43. S. Dancette, A. Browet, G. Martin, M. Willemet, and L. Delannay: Model. Simul. Mater. Sci. Eng., 2016, vol. 24, p. 055014.10.1088/0965-0393/24/5/055014 ↗
44. L. Delannay, P.J. Jacques, and S.R. Kalidindi: Int. J. Plast., 2006, vol. 22, p. 1879.10.1016/j.ijplas.2006.01.008 ↗
45. C. Lavogiez, S. Dancette, S. Cazottes, C. Le Bourlot, and E. Maire: Mater. Charact., 2018, vol. 146, p. 81.10.1016/j.matchar.2018.09.039 ↗
46. J. Campbell: Casting Practice: The Ten Rules of Casting, Butterworth-Heinemann, Oxford, 2004.
47. T.L. Anderson: Fracture Mechanics, CRC Press, Boca Raton, 1995, p. 627.
48. J. Newman Jr. and I. Raju: Eng. Fract. Mech., 1981, vol. 15, p. 185.10.1016/0013-7944(81)90116-8 ↗
49. P. Mu, Y. Nadot, C. Nadot-Martin, A. Chabod, I. Serrano-Munoz, and C. Verdu: Int. J. Fatigue, 2014, vol. 63, p. 97.10.1016/j.ijfatigue.2014.01.011 ↗
50. Z. Xu, W. Wen, and T. Zhai: Metall. Mater. Trans. A, 2012, vol. 43A, p. 2763.10.1007/s11661-011-0947-x ↗
51. A. Borbely, H. Mughrabi, G. Eisenmeier, and H. Hoppel: Int. J. Fract., 2002, vol. 115, p. 227.10.1023/A:1016350528652 ↗
52. L. Bolzoni, M. Nowak, and N.H. Babu: Mater. Des. (1980–2015), 2015, vol. 66, p. 376.10.1016/j.matdes.2014.08.067 ↗
53. S. Nafisi and R. Ghomashchi: J. Mater. Process. Technol., 2006, vol. 174, p. 371.10.1016/j.jmatprotec.2006.02.012 ↗
54. E. Samuel, B. Golbahar, A. Samuel, H. Doty, S. Valtierra, and F. Samuel: Mater. Des. (1980–2015), 2014, vol. 56, p. 468.10.1016/j.matdes.2013.11.058 ↗
55. C.Y. Kung and M.E. Fine: Metall. Trans. A, 1979, vol. 10, p. 603.10.1007/BF02658324 ↗
56. W.L. Morris: Metall. Trans. A, 1980, vol. 11, p. 1117.10.1007/BF02668135 ↗
57. J. Schijve: Eng. Fract. Mech., 1981, vol. 14, p. 467.10.1016/0013-7944(81)90035-7 ↗
58. R. Ritchie: Workshop Mech. Phys. Crack Growth Appl. Life Predict.