Hot Deformation Characteristics of 9Cr-1.5Mo-1.25Co-VNb Ferritic-Martensitic Steel
Source abstract
Abstract
The hot workability of 9Cr-1.5Mo-1.25Co-VNb ferritic-martensitic steel was investigated through hot compression tests using Gleeble simulator over a temperature range of 1223 K (950 °C) to 1573 K (1300 °C) and strain rates of 0.001 to 0.5 per second. Through an analysis of the stress(σ)–strain(e) curves obtained during the hot compression tests, a processing map was developed to predict the hot workability, based on a dynamic material model (DMM). The processing map indicated that the hot workability deteriorates with an increase in the strain rate and a decrease in the temperature. During hot compression tests at temperatures exceeding 1473 K (1200 °C), δ-ferrite was formed along austenite grain boundaries and fine austenite grains then nucleated at the austenite/δ-ferrite interphase due to dynamic recrystallization (DRX), which was beneficial to the hot workability. At a temperature below 1223 K (950 °C), intergranular cracking occurred, after which a transmission electron microscopy (TEM) analysis revealed that this intergranular cracking resulted from the precipitation of intergranular M23C6 particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. F. Liu, D.H.R. Fors, A. Golpayegani, G.-O. Andrén and G. Wahmström: Metall. Trans. A, 2012, vol. 43A, pp. 4053-62.10.1007/s11661-012-1205-6 ↗
2. Z.B. Zhang, O.V. Mishin, N.R. Tao and W. Pantleon: J. Nucl. Mater., 2015, vol. 458, pp. 64-69.10.1016/j.jnucmat.2014.12.001 ↗
3. T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, K.K. Rink and U. Sahaym: J. Nucl. Mater., 2012, vol. 423, pp. 110-19.10.1016/j.jnucmat.2012.01.005 ↗
4. M. Shibuya, Y. Toda, K. Sawada, H. Kushima and K. Kimura: Mater. Sci. & Eng. A, 2016, vol. 652, pp. 1-6.10.1016/j.msea.2015.11.068 ↗
5. F.-S. Y, W.-S. Jung and S.-H. Chung: Scripta Mater., 2007, vol. 57, pp. 469-72.10.1016/j.scriptamat.2007.05.034 ↗
6. J. Moon, C.-H. Lee, T.-H. Lee, M.-H. Jang, M.-G. Park and H.N. Han: J. Nucl. Mater., 2014, vol. 455, pp. 81-85.10.1016/j.jnucmat.2014.04.048 ↗
7. K. Iwanaga, T. Tsuchiyama and S. Takaki: Key Eng. Mater., 2000, vol. 171-174, pp. 477-82.
8. H. Cerjak, P. Hofer and B. Schaffernak: Key Eng. Mater., 2000, vol. 171-174, pp. 453-60.
9. J. F. Mansfield: J. Mater. Sci., 1987, vol. 22, pp. 1277-85.10.1007/BF01233121 ↗
10. K. Maruyama, K. Sawada and J.-I. Koike: ISIJ Int., 2001, vol. 41, pp. 641-53.10.2355/isijinternational.41.641 ↗
11. N.H. Heo, J.C. Chang, K.B. Yoo, J.K. Lee and J. Kim: Mater. Sci. & Eng. A, 2011, vol. 528, pp. 2678-85.10.1016/j.msea.2010.12.025 ↗
12. S.A. Krishnan, C. Phaniraj, C. Ravishankar, A.K. Bhaduri and P.V. Sivaprasad: Inter. J. Press. Ves. Piping, 2011, vol. 88, pp. 501-6.10.1016/j.ijpvp.2011.07.009 ↗
13. G. Zhang, Z. Zhou, H. Sun, L. Zou, M. Wang and S. Li: J. Nucl. Mater., 2014, vol. 455, pp. 139-44.10.1016/j.jnucmat.2014.05.043 ↗
14. L. Xu, Z. Yan, Y. Liu, H. Li, B. Ning and Z. Qiao: J. Mater. Res., 2013, vol. 28, pp. 2835-43.10.1557/jmr.2013.267 ↗
15. J. Moon, T.-H. Lee, J.-H. Shin and J.-W. Lee: Mater. Sci. & Eng. A, 2014, vol. 594, pp. 302-8.10.1016/j.msea.2013.11.090 ↗
16. M. Ma, H. Ding, Z.-Y. Tang, J.-W. Zhao, Z.-H. Jiang and G.-W. Fan: J. Iron Steel Res. Int., 2016, vol. 23, pp. 244-52.10.1016/S1006-706X(16)30041-3 ↗
17. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127-36.10.1016/1359-6454(95)00146-7 ↗
18. S. Saadatkia, H. Mirzadeh and J.-M. Cabrera: Mater. Sci. & Eng. A, 2015, vol. 636, pp. 196-202.10.1016/j.msea.2015.03.104 ↗
19. E.I. Poliak and J.J. Jonas: ISIJ Int., 2003, vol. 43, pp. 684-91.10.2355/isijinternational.43.684 ↗
20. H. Mirzadeh, J.M. Cabrera, A. Najafizadeh and P.R. Calvillo: Mater. Sci. & Eng. A, 2012, vol. 538, pp. 236-45.10.1016/j.msea.2012.01.037 ↗
21. H. Mirzadeh, J.M. Cabrera, J.M. Prado and A. Najafizadeh: Mater. Sci. & Eng. A, 2011, vol. 528, pp. 3876-82.10.1016/j.msea.2011.01.098 ↗
22. H. Mirzadeh and A. Najafizadeh: Mater. Des., 2010, vol. 31, pp. 1174-79.10.1016/j.matdes.2009.09.038 ↗
23. S.M. Abbasi and A. Momeni: Mater. Sci. & Eng. A, 2012, vol. 552, pp. 330-35.10.1016/j.msea.2012.05.048 ↗
24. M. Mirzaee, H. Keshmiri, G.R. Ebrahimi and A. Momeni: Sci. & Eng. A, 2012, vol. 551, pp. 25-31.10.1016/j.msea.2012.04.063 ↗
25. A. Momeni and K. Dehghani: Metall. Trans. A, 2011, vol. 42A, pp. 1925-32.10.1007/s11661-010-0565-z ↗
26. A. Momeni, K. Dehghani, G.R. Ebrahimi and H. Keshmiri: Metall. Trans. A, 2011, vol. 41A, pp. 2898-904.
27. Y.L. Fang, Z.Y. Liu, H.M. Song and L.Z. Jiang: Mater. Sci. & Eng. A, 2009, vol. 526, pp. 128-33.10.1016/j.msea.2009.07.012 ↗
28. S. Venugopal, S.L.Mannan and Y.V.R.K. Prasad: Mater. Lett., 1992, vol. 15, pp. 79-83.10.1016/0167-577X(92)90016-D ↗
29. Y. Wu, M. Zhang, X. Xie, J. Dong, F. Liu and S. Zhao: J. Alloys Compd., 2016, vol. 656, pp. 119-31.10.1016/j.jallcom.2015.09.219 ↗
30. Y.V.R.K. Prasad: Indian J. Technol., 1990, vol. 28, pp. 435-51.
31. T. Xi, C. Yang, M.B. Shahzad and K. Yang: Mater. Des., 2015, vol. 87, pp. 303-12.10.1016/j.matdes.2015.08.011 ↗
32. M.S. Zafarghandi, S.M. Abbasi and A. Momeni: J. Alloys Compd., 2019, vol. 774, pp. 18-29.10.1016/j.jallcom.2018.09.301 ↗
33. A. Kipelova, A. Belyakov and R. Kaibyshev: Philos. Mag., 2013, vol. 93, pp. 2259-68.10.1080/14786435.2013.765995 ↗
34. J.F. Grubb and R.N. Wright: Metall. Trans. A, 1979, vol. 10A, pp. 1247-55.10.1007/BF02811980 ↗