Tailoring by Direct Contact Heating During Hot Forming/Die Quenching
Source abstract
Abstract
The well-known drawbacks of furnace-based technologies used for hot-stamping ultrahigh strength steel (UHSS) parts motivate development of alternative approaches for austenitizing blanks, among them direct contact heating. While the objective of most hot-stamping operations is to produce fully martensitic parts, there is growing interest in developing tailoring techniques for making parts having inhomogeneous mechanical properties for improved crash performance. This work shows how direct contact heating can produce parts having highly controlled microstructures by virtue of the different thermal effusivities of steel and ceramic regions on the heating die, even though the contact surface remains nearly isothermal. The process is designed with the aid of a finite element model that incorporates an austenitization submodel for 22MnB5, a common ultrahigh strength steel. Microhardness measurements and metallographic analysis on heated and quenched blanks are consistent with modeled austenite phase fractions, and highlight the potential of this technique for producing strong and lightweight automotive parts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. C. Palm, R. Vollmer, and J. Aspacher: in International Conference on the Technology of Plasticity ICTP2017, Cambridge, UK, 2017.
2. K. Mori, P. F. Bariani, B.-A. Behrens, A. Brosius, S. Bruschi, T. Maenoe, M. Merklein, and J. Yanagimoto: CIRP Ann. Manuf. Tech., 2017, vol. 66, pp. 755-77.10.1016/j.cirp.2017.05.007 ↗
3. [3] K. S. Jhajj, S. R. Slezak, and K. J. Daun, Appl. Therm. Eng., 2015, vol. 83, pp. 98-107.10.1016/j.applthermaleng.2015.03.013 ↗
4. K. Mori, S. Maki, and Y. Tanaka: CIRP Ann. Manuf. Tech., 2005, vol. 54, pp. 209-12.10.1016/S0007-8506(07)60085-7 ↗
5. B. Behrens, S. Hübner, and M. Demir: in Hot Sheet Meal Forming of High Performance Steel: 1st International Conference, Kassel, 2008.
6. R. Kolleck, R. Veit, M. Merklein, J. Lechler, and M. Geiger, CIRP Ann. Manuf. Tech., 2009, vol. 58, pp. 275-278.10.1016/j.cirp.2009.03.090 ↗
7. T. Maeno, K. Ogihara, K. Mori, and T. Fujita: in 2014 Japanese Spring Conference for Technology of Plasticity, Tsukuba, Japan, 2014.
8. V. Ploshikhin, A. Prihodovsky, J. Kaiser, R. Bisping, H. Linder, C. Lengsdorf, and K. Roll: in Tools and Technologies for Processing Ultra High Strength Materials, Graz, Austria, 2011.
9. J.N. Rasera, K.J. Daun, and M. D’Souza: in Proc. ASME 2014 IMECE, Montreal, 2014.
10. M. J. Holzweissig, J. Lackmann, S. Konrad, M. Schaper, and T. Niendorf, Metall. Mater. Trans. A., 2015, vol. 46A, pp. 3199-3207.10.1007/s11661-015-2907-3 ↗
11. D. Landgrebe, M. Putz, F. Schieck, A. Sterzing and A. Rennau: in 5th International Conference on Accuracy in Forming Technology, Chemnitz, Germany, 2015.
12. N.N. Field, M. DiCiano, M. D’Souza, A.P. Gerlich and K.J. Daun: in Hot Sheet Metal Forming of High-Performance Steel: 6th International Conference, M. Oldenburg, B Prakash, and K. Steinhoff, eds., Auerbach, Germany, Wissenschaftliche Scripten, 2017, pp. 504–14.
13. A. Andreiev, O. Grydin and M. Schaper: in Proc. 3rd Pan American Materials Congress, Berlin, Springer, 2017, pp. 723–36.10.1007/978-3-319-52132-9_72 ↗
14. J.N. Rasera, N.N. Field, M. D’Souza and K.J. Daun: in Hot Sheet Metal Forming of High-Performance Steel: 5th International Conference, K. Steinhoff, M. Oldenburg, and B Prakash, eds., Auerbach, Germany, Wissenschaftliche Scripten, 2015, pp. 473–80.
15. [15] J. N. Rasera, K. J. Daun, C.-J. Shi, and M. D’Souza, Appl. Therm. Eng., 2016, vol. 98, pp. 1165-1173.10.1016/j.applthermaleng.2015.12.142 ↗
16. [16] C. Loebbe, O. Hering, L. Hiegemann and A. E. Tekkaya, “Setting mechanical properties of high strength steels for rapid hot forming processes,” Materials, 2016, vol. 9, pp. 229.10.3390/ma9040229 ↗
17. [17] A. Andreiev, O. Grydin and M. Schaper, Steel Res. Int., 2016, vol. 87, pp. 1733-1741.10.1002/srin.201600086 ↗
18. [18] M. Merklein, M. Wieland, M. Lechner, S. Bruschi and A. Ghiotti, J. Mater. Process. Technol., 2016, vol. 228, pp. 11-24.10.1016/j.jmatprotec.2015.09.023 ↗
19. [19] R. George, A. Bardelcik and M. J. Worswick, J. Mater. Process. Tech., 2012, vol. 212, pp. 2386-2399.10.1016/j.jmatprotec.2012.06.028 ↗
20. [20] B. A. Behrens, A. Bouguecha, C. M. Gaebel, J. Moritz and J. Schrodter, Procedia Engineering, 2014, vol. 81, pp. 1756-1761.10.1016/j.proeng.2014.10.227 ↗
21. J. Wilsius, B. Tavernier and D. Abou-Khalil: in Hot Sheet Meal Forming of High Performance Steel: 3rd International Conference, M. Oldenburg, K. Steinhoff, and B. Prakash, eds., Auerbach, Germany, Wissenschaftliche Scripten, 2011, pp. 427–35.
22. Y. Mu, B. Wang, J. Zhou, X. Huang, and X. Li: Metall. Mater. Trans. A, 2017, vol. 48, pp. 5467–79.10.1007/s11661-017-4270-z ↗
23. K. Mori, T. Maeno, and K. Mongkolkaji: J. Mater. Process. Technol., 2013, vol. 213, pp. 508-14.10.1016/j.jmatprotec.2012.10.005 ↗
24. [24] K. Mori and Y. Okuda, CIRP Ann, 2010, vol. 59, pp. 291-294.10.1016/j.cirp.2010.03.107 ↗
25. [25] M. Di Ciano, N. N. Field, M. A. Wells and K. J. Daun, J. Mater. Eng. Perform., 2018, vol. 27, pp. 1792-1802.10.1007/s11665-018-3262-5 ↗
26. [26] Y. A. Çengal, Introduction to Thermodynamics and Heat Transfer, 2nd Ed., New York: John Wiley and Sons, 2007.
27. N.N. Field: MASc thesis, University of Waterloo, 2017.
28. [28] N. Li, J. Lin, D. S. Balint and T. A. Dean, J. Mater. Process. Techol., 2016, vol. 237, pp. 394-401.10.1016/j.jmatprotec.2016.06.006 ↗
29. [29] H. Yan, M. Di Ciano, M. Verma, K. J. Daun, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 418, 012010.10.1088/1757-899X/418/1/012010 ↗
30. [30] M. Verma, H. Yan, J. R. Culham, M. Di Ciano, K. J. Daun, ASME J. Heat Transfer, 2019, vol. 141, 062101.10.1115/1.4042904 ↗
31. [31] A. Bardelcik, C. P. Salisbury, S. Winkler, M. A. Wells and M. J. Worswick, Int. J. Impact Eng., 2010, vol. 37, pp. 694-702.10.1016/j.ijimpeng.2009.05.009 ↗
32. [32] A. Bardelcik, M. J. Worswick, S. Winkler and M. A. Wells, Int. J. Impact Eng., 2012, vol. 50, pp. 49-62.10.1016/j.ijimpeng.2012.06.007 ↗
33. [33] J. Huang, W. J. Poole and M. Militzer, Metall. Mater. Trans. A, 2004. vol. 35, pp. 3363-3375.10.1007/s11661-004-0173-x ↗
34. V. Ploshikhin, A. Pridodovsky, J. Kaiser, and L. Skutella: in Tools and Technologies for Processing Ultra High Strength Materials, Graz, Austria, 2013.
35. [35] J. Zhang, S.-M. Jiang, Q.-F. Zhang and C. S. Liu, J. Iron Steel. Res. Int., 2016, vol. 23, pp. 270-275.10.1016/S1006-706X(16)30044-9 ↗