Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels
Source abstract
Abstract
Abstract For the construction of mobile crane booms, ultra-high strength steels produced via thermomechanical processing (TMP) have widely substituted steels fabricated through the conventional quenching and tempering (Q+T) route. A strong deformation of the austenite grain during hot rolling followed by direct quenching (DQ) offers benefits in terms of strength and toughness. To guarantee an optimal through-hardening, alloying elements retarding the γ to α transformation are used. To explore the influence of the processing route on the critical cooling rate and the hardenability, hot deformation tests were performed on a deformation dilatometer. Different cooling rates were applied after deformation corresponding to two different rolling cycles with varying finish rolling temperatures (FRTs). The obtained hardness values were compared to those received through conventional quenching after austenitization. These investigations conducted on three steels with varying micro-alloying contents showed that Nb in combination with TMP raises strength significantly, and promotes a bainitic and ferritic transformation in solid solution. When applying low FRTs and in combination with other micro-alloying elements, NbC coarsens and reduces the effect of precipitation hardening.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. I. Tamura, ed.: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworths, London ; Boston, 1988.
2. M. Klein, H. Spindler, A. Luger, R. Rauch, P. Stiaszny, and M. Eigelsberger: Mater. Sci. Forum, 2005, vol. 500–501, pp. 543–50.10.4028/www.scientific.net/MSF.500-501.543 ↗
3. K.E. Hensger and M.L. Bernštejn: Thermomechanische Veredlung von Stahl, VEB Deutscher Verlag für Grundstoffindustrie, 1984.
4. C. Ouchi: ISIJ Int., 2001, vol. 41, pp. 542–553.10.2355/isijinternational.41.542 ↗
5. D.K. Matlock and J.G. Speer: Mater. Sci. Technol., 2009, vol. 25, pp. 1118–25.10.1179/174328408X322222 ↗
6. M. Klein, R. Rauch, H. Spindler, and P. Stiaszny: BHM Berg- Hüttenmänn. Monatshefte, 2012, vol. 157, pp. 108–112.10.1007/s00501-012-0062-3 ↗
7. P. Haslberger, S. Holly, W. Ernst, and R. Schnitzer: J. Mater. Sci., 2018, vol. 53, pp. 6968–79.10.1007/s10853-018-2042-9 ↗
8. L. Bracke, W. Xu, and T. Waterschoot: Mater. Today Proc., 2015, vol. 2, pp. S659–62.10.1016/j.matpr.2015.07.370 ↗
9. T. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7, pp. 41–8.10.1007/BF02644037 ↗
10. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343–57.10.1007/BF02814873 ↗
11. R.G. Davies and C.L. Magee: Metall. Trans., 1971, vol. 2, pp. 1939–1947.10.1007/BF02814918 ↗
12. Y. Prawoto, N. Jasmawati, and K. Sumeru: J. Mater. Sci. Technol., 2012, vol. 28, pp. 461–6.10.1016/S1005-0302(12)60083-8 ↗
13. P.D. Hodgson, H. Beladi, and M.R. Barnett: Mater. Sci. Forum, 2005, vol. 500–501, pp. 39–48.10.4028/www.scientific.net/MSF.500-501.39 ↗
14. A.J. Kaijalainen, P. Suikkanen, L.P. Karjalainen, and J.J. Jonas: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1273–83.10.1007/s11661-013-2062-7 ↗
15. A.J. Kaijalainen, P.P. Suikkanen, T.J. Limnell, L.P. Karjalainen, J.I. Kömi, and D.A. Porter: J. Alloys Compd., 2013, vol. 577, pp. S642–8.10.1016/j.jallcom.2012.03.030 ↗
16. A. Kaijalainen, N. Vähäkuopus, M. Somani, S. Mehtonen, D. Porter, and J. Kömi: Arch. Metall. Mater., 2017, vol. 62, pp. 619–626.10.1515/amm-2017-0091 ↗
17. O. Haiko, I. Miettunen, D. Porter, N. Ojala, V. Ratia, V. Heino, and A. Kemppainen: vol. 35, p. 17.
18. H.J. Bargel: Werkstoffkunde, VDI-Verlag, Düsseldorf, 1987.
19. O. Girina, N. Fonstein, D. Panahi, D. Bhattacharya, and S. Jansto: in HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015, Tms, ed., Wiley, Hoboken, NJ, 2015, pp. 237–45.10.1002/9781119223399.ch24 ↗
20. A.I.H. Committee: ASM Handbook: Heat Treating, ASM International, New York, 1991.
21. M. Yamada, L. Yan, R. Takaku, S. Ohsaki, K. Miki, K. Kajikawa, and T. Azuma: ISIJ Int., 2014, vol. 54, pp. 240–7.10.2355/isijinternational.54.240 ↗
22. E.C. Bain and H.W. Paxton: Alloying Elements in Steel, 2nd ed., Metals Park, Ohio: American Society for Metals, 1961.
23. W.C. Leslie: The Physical Metallurgy of Steels, Washington: Hempisphere Pub. Corp. ; New York : McGraw-Hill, 1981.
24. T.G. Digges, C.R. Irish, and N.L. Carwile: J. Res. Natl. Bur. Stand., 1948, vol. 41, p. 545.10.6028/jres.041.043 ↗
25. W.J. Foy: Bachelors Theses Rep., 1943, pp. 1928–70, 185.
26. V.D. Eisenhüttenleute: Steel - A Handbook for Materials Research and Engineering: Volume 1: Fundamentals, Springer, Berlin, 1991.
27. M.S. Joo, D.-W. Suh, J.H. Bae, N.S. Mouriño, R. Petrov, L.A.I. Kestens, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2012, vol. 556, pp. 601–06.10.1016/j.msea.2012.07.033 ↗
28. H.L. Haskel, E. Pauletti, J.D.P. Martins, and A.L.M. Carvalho: Mater. Res., 2014, vol. 17, pp. 1238–50.10.1590/1516-1439.268314 ↗
29. A. Kaijalainen, S. Pallaspuro, and D.A. Porter: Adv. Mater. Res., 2014, vol. 922, pp. 316–21.10.4028/www.scientific.net/AMR.922.316 ↗
30. S. Pallaspuro, A. Kaijalainen, T. Limnell, and D.A. Porter: Adv. Mater. Res., 2014, vol. 922, pp. 580–5.10.4028/www.scientific.net/AMR.922.580 ↗
31. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Institute of Materials, 1997.
32. M. Takahashi and H.K.D.H. Bhadeshia: J. Mater. Sci. Lett., 1989, vol. 8, pp. 477–8.10.1007/BF00720712 ↗
33. G.F. Vander Voort: Atlas of Time-Temperature Diagrams for Irons and Steels, 7th edn., ASM International, New York, 1991.
34. R. Esterl, M. Sonnleitner, M. Stadler, G. Wölger, and R. Schnitzer: Pract. Metallogr., 2018, vol. 55, pp. 203–22.10.3139/147.110491 ↗
35. J.M. Sosa, D.E. Huber, B. Welk, and H.L. Fraser: Integrating Mater. Manuf. Innov., 2014, vol. 3, p. 10.
36. C.R. Brooks: Principles of the Heat Treatment of Plain Carbon and Low Alloy Steels, 1st edn., ASM International, New York, 1996.10.31399/asm.tb.phtpclas.9781627083539 ↗
37. A.S. for M.M.H. Committee: Metals Handbook, Vol. 8: Metallography, Structures and Phase Diagrams, ASM, New York, 1973.
38. P. Maugis, D. Gendt, S. Lanteri, and P. Barges: Defect Diffus. Forum, 2001, vol. 194–199, pp. 1767–72.10.4028/www.scientific.net/DDF.194-199.1767 ↗
39. E. Orowan: London: The Institute of Metals, 1948, pp. 451–53.
40. T. Gladman: Mater. Sci. Technol., 1999, vol. 15, pp. 30–6.10.1179/026708399773002782 ↗
41. C. Klinkenberg, K. Hulka, and W. Bleck: Steel Res. Int., 2004, vol. 75, pp. 744–52.10.1002/srin.200405837 ↗
42. G.E. Totten: Steel Heat Treatment: Metallurgy and Technologies, CRC Press, 2006.10.1201/NOF0849384523 ↗
43. H. Yang and H. Bhadeshia: Scr. Mater., 2009, vol. 60, pp. 493–5.10.1016/j.scriptamat.2008.11.043 ↗
44. T.G. Digges: J. Res. Natl. Bur. Stand., 1940, vol. 24, p. 723.10.6028/jres.024.043 ↗
45. P.J. Brofman and G.S. Ansell: Metall. Trans. A, 1983, vol. 14, pp. 1929–1931.10.1007/BF02645565 ↗