Effect of Test Method on Stress-Relaxation Behavior of Alloy 718
Source abstract
Abstract
The stress-relaxation behavior of alloy 718 was established at 991 K (718 °C) using two contrasting test protocols. For this purpose, compression and tension samples extracted from two subscale forgings were first solution treated and cooled to room temperature. Each sample was then reheated to 991 K (718 °C), compressed or pulled isothermally to a total strain between 0.006 and 0.02, and then allowed to relax after locking either (i) the extensometer attached to the dies (compression tests) or reduced section (tension tests) or (ii) the ram itself. For the tests in compression, the stress dropped in a monotonic fashion under locked-extensometer conditions, while the locked-ram mode gave rise to a short stress drop, a broad hardening stage, and finally softening at long times. For the tension stress-relaxation tests, monotonic stress drops whose magnitudes varied for the two test modes were observed. The various behaviors were ascribed to the specific level of plastic strain imposed during the different types of tests, its quantitative effect on the level of dynamic strain aging, and thus the increment in hardening which counterbalanced stress-relaxation per se.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. J.M. Franchet, F. Devy, P.E. Mosser, Y. Honnorat, and A. Benallal: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds. TMS, Warrendale, PA, 1992, pp. 73–82.
2. 2.D. Dye, K.T. Conlon, and R.C. Reed: Metall. Mater. Trans A, 2004, vol. 35A, pp. 1703-1713.10.1007/s11661-004-0079-7 ↗
3. 3.M.A. Rist, S. Tin, B.A. Roder, J.A. James, and M.R. Daymond: Metall. Mater. Trans A, 2006, vol. 37A, pp. 459-467.10.1007/s11661-006-0017-y ↗
4. K. Ma, R.L. Goetz, and S.K. Srivatsa: in ASM Handbook, Vol. 22B: Metals Process Simulation, D.U. Furrer and S.L. Semiatin, eds., ASM International, Materials Park, OH, 2010, pp. 386–408.10.31399/asm.hb.v22b.a0005537 ↗
5. R.A. Wallis and P.R. Bhowal: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds. TMS, Warrendale, PA, 1988, pp. 525–34.
6. 6.M. Khadhraoui, W. Cao, L. Castex, and J.Y. Guedou: Mater. Sci. Tech., 1997, vol. 13, pp. 360-367.10.1179/mst.1997.13.4.360 ↗
7. 7.T.P. Gabb, J. Telesman, P. T. Kantzos, P. J. Bonacuse, R. L. Barrie, and D. J. Hornbach: TMS Ltrs, 2004, vol. 5, pp. 115-116.
8. 8.D. Cai, P. Nie, J. Shan, W. Liu, Y. Gao, and M. Yao: J. Mater. Eng. Perf., 2006, vol. 15, pp. 614-617.10.1361/105994906X124613 ↗
9. 9.P.E. Aba-Perea, T. Pirling, and M. Preuss: Mater. And Design, 2016, vol. 110, pp. 925-931.10.1016/j.matdes.2016.07.078 ↗
10. 10.D. Lee and E.W. Hart: Metall. Trans., 1971, vol. 2, pp. 1245-1248.10.1007/BF02664258 ↗
11. 11.O. Bapokutty, Z. Sajuri, and S. Syarif: J. Appl. Sci., 2012, vol. 12, pp. 870-875.10.3923/jas.2012.870.875 ↗
12. 12.S. Rahimi, M. King, and C. Dumont: Mater. Sci. Eng., 2017, vol. A708, pp. 563-573.10.1016/j.msea.2017.09.116 ↗
13. S.L. Semiatin, P.N. Fagin, B. Streich, R.L. Goetz, and V. Venkatesh: in Proc. 9th Inter. Symp. On Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, E. Ott, et al., eds., Springer International, New York, 2018, pp. 957–75.10.1007/978-3-319-89480-5_64 ↗
14. 14.P. Rodriguez: Bull. Mat. Sci., 1984, vol. 6, pp. 653–63.10.1007/BF02743993 ↗
15. 15.C.L. Hale, W.S. Rollings, and M.L. Weaver: Mater. Sci. Eng. A, 2001, vol. A300, pp. 153-164.10.1016/S0921-5093(00)01470-2 ↗
16. 16.M.C. Chaturvedi and Y-F. Han: Metal Science, 1983, vol. 17, pp. 145-149.10.1179/030634583790421032 ↗
17. F. Zhang, W. Cao, C. Zhang, S. Chen, J. Zhu, and D. Lv: in Proceedings, 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, E. Ott, ed., TMS, Pittsburgh, 2018, pp. 147–61.10.1007/978-3-319-89480-5_8 ↗
18. 18.A. Thomas, M. El-Wahabi, J.M. Cabrera, J.M. Prado: J. Mater. Proc. Technol., 2006, vol. 177, pp. 469-472.10.1016/j.jmatprotec.2006.04.072 ↗
19. 19.C. Slama and G. Cizeron: Journal de Physique III, 1997, vol. 7 (3), pp. 665-688.
20. 20.I. Weiss and J.J. Jonas: Metall. Trans. A, 1979, vol. 10A, pp. 831-840.10.1007/BF02658301 ↗
21. 21.J. Calvi, S. Shu, and J.M. Cabrera: Mater. Sci. Forum, 2012, vol. 706-709, pp. 2393-2399.10.4028/www.scientific.net/MSF.706-709.2393 ↗
22. J. Cormier: Institut P’, ISAE-ENSMA, Chasseneuil-Futuroscope, France, Private Communication, 2018.
23. 23.B. Max, B. Viguier, E. Andrieu, and J.M. Cloue: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5431-5441.10.1007/s11661-014-2508-6 ↗
24. H. Qin, Z. Bi, D. Li, R. Zhang, T.L. Lee, G. Feng, H. Dong, J. Du, and J. Zhang: Mater. Sci. Eng. A, 2019, in press.