journal article·2017-12

Microstructural Evolution of Thor™ 115 Creep-Strength Enhanced Ferritic Steel

Matteo Ortolani, Mirco D’Incau, Regina Ciancio, Paolo Scardi

Publisher page

Abstract

A new ferritic steel branded as Thor(TM) 115 has been developed to enhance high-temperature resistance. The steel design combines an improved oxidation resistance with long-term microstructural stability. The new alloy, cast to different product forms such as plates and tubes, was extensively tested to assess the high-temperature time-dependent mechanical behavior (creep). The main strengthening mechanism is precipitation hardening by finely dispersed carbide and nitride phases. Information on the evolution of secondary phases and time-temperature-precipitation behavior of the alloy, essential to ensure long-term property stability, was obtained by scanning transmission electron microscopy with energy dispersive spectroscopy, and by X-ray Powder Diffraction on specimens aged up to 50,000 hours. A thermodynamic modeling supports presentation and evaluation of the experimental results. The evolution of precipitates in the new alloy confirms the retention of the strengthening by secondary phases, even after long-term exposure at high temperature. The deleterious conversion of nitrides into Z phase is shown to be in line with, or even slower than that of the comparable ASME grade 91 steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. L. Cipolla: Conversion of MX Nitrides to Modified Z-Phase in 9-12% Cr Ferritic Steels, Ph.D. Thesis, DTU Mechanical Engineering, Technical University of Denmark, 201010.1016/j.actamat.2009.09.045 ↗
2. L. Cipolla, H. K. Danielsen, D. Venditti, P. E. Di Nunzio, J. Hald, M. A. J. Somers: Acta Materialia, 2010, vol. 58, pp. 669-67910.1016/j.actamat.2009.09.045 ↗
3. L. Cipolla, H. K. Danielsen, D. Venditti, P. E. Di Nunzio, J. Hald, M. A. J. Somers: Scripta Materialia, 2010, vol. 63, pp. 324-32710.1016/j.scriptamat.2010.04.025 ↗
4. P.E. Di Nunzio, L. Cipolla, M. A. J. Somers, S. Tiberi Vipraio: Materials Science and Technology, 2010, vol. 26, pp. 1423-142810.1179/026708309X12567268926687 ↗
5. V.K. Sikka, J.R. DiStefano, J.J. Blass, R.L. Huddleston, C.R. Brinkman, J.F. King, J.M. Corum, R.W. McClump, J.A. Horsk, W.K. Sartory: ORNL report TM-6303. Oak Ridge National Laboratory, Oak Ridge, TN, 1986.
6. N. Otsuka: Materials at High Temperatures, 2005, vol. 22, pp. 131-13810.3184/096034005782750563 ↗
7. J. P. Shingledecker, B.A. Pint, A.S. Sabau, A.T. Fry and I.G. Wright: Advanced Materials and Processing, 2013, vol. 171 (1), pp. 23-25
8. K. Sawada, H. Kushima, K. Kimura: ISIJ International, 2006, vol. 46, pp. 769-77510.2355/isijinternational.46.769 ↗
9. K. Sawada, H. Kushima, K. Kimura, M. Tabuchi: ISIJ International, 2007, vol. 47, pp. 733-73910.2355/isijinternational.47.733 ↗
10. A. Di Gianfrancesco, ed.: Materials for Ultra-Supercritical and Advanced Ultra-supercritical Power Plants, Woodhead Publishing, 2016
11. Y. Minami, Y. Yamamoto, M. Ortolani, P. Mariani, and B. Pin: in Proceedings from the Eighth International Conference on Advances in Materials Technology for Fossil Power Plants, J. Parker, J. Shingledecker, J. Siefert, eds., ASM International, 2016, pp. 877–87
12. H.K. Danielsen: in Proceedings of the Seventh International Conference on Advances in Materials for Fossil Power Plants, D. Gandy, and J. Shingledecker, eds., ASM International, 2014, pp. 1104–1510.31399/asm.cp.am-epri-2013p1104 ↗
13. M. Ortolani, P. Mariani: Materials at High Temperatures, 2016, vol. 33, pp. 604-60810.1080/09603409.2016.1201332 ↗
14. M. Ortolani and P. Mariani: Materials at High Temperatures, 2016
15. L. Cipolla, A. Di Gianfrancesco, D. Venditti, G. Cumino, and S. Caminada: in Proceedings of the ASME 2007 Pressure Vessels and Piping Conference, 2007, vol. 9: Eight International Conference on Creep and Fatigue at Elevated Temperatures, July 22–26, 2007, San Antonio, Texas.
16. L. Cipolla, S. Caminada, D. Venditti, H.K. Danielsen, and A. Di Gianfrancesco: in Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, L. Lecomte-Beckers, Q. Contrepois, F. Kuhn, T. Beck, eds., Schriften des Forschungszentrum Julich, 2010
17. A. Di Gianfrancesco, S. Tiberi Vipraio, and D. Venditti: in Proceedings of the 21th international conference on Metallurgy and Materials, TANGER Ltd., 2012
18. G. Qin, S. Holdsworth, A. Strang, P.F. Morris, P.D. Clarke, and A.P. Backhouse: in Proceedings of the 2nd ECCC Creep Conference on Creep & Fracture in High Temperature Components, A. Shibli, and S.R. Holdsworth, eds., DEStech Publications, 2009.
19. A. A. Coelho: TOPAS Version 6, Bruker AXS GmbH, July 2016, Karlsruhe, Germany.
20. R. A. Young, editor: The Rietveld Method, Oxford University Press, Oxford, 1993.
21. H.P. Klug, L.E. Alexander: X-Ray Diffraction Procedures: For Polycrystalline and Amorphous Materials: 2 nd edition, Wiley, 1979
22. L. B. McCusker, R. B. Von Dreele, D. E. Cox, D. Louër and P. Scardi: Journal of Applied Crystallography, 1999, vol. 32, pp. 36-5010.1107/S0021889898009856 ↗
23. E. Kozeschnik: Modeling Solid-State Precipitation, Momentum Press (2012)10.5643/9781606500644 ↗
24. P. Warczok: MatCalc Engineering GmbH, private communication, December 2016.