journal article·2017-08

Understanding the Effect of Grain Boundary Character on Dynamic Recrystallization in Stainless Steel 316L

Megan Beck, Michael Morse, Caleb Corolewski, Koyuki Fritchman, Chris Stifter, Callum Poole, Michael Hurley, Megan Frary

Publisher page

Abstract

Dynamic recrystallization (DRX) occurs during high-temperature deformation in metals and alloys with low to medium stacking fault energies. Previous simulations and experimental research have shown the effect of temperature and grain size on DRX behavior, but not the effect of the grain boundary character distribution. To investigate the effects of the distribution of grain boundary types, experimental testing was performed on stainless steel 316L specimens with different initial special boundary fractions (SBF). This work was completed in conjunction with computer simulations that used a modified Monte Carlo method which allowed for the addition of anisotropic grain boundary energies using orientation data from electron backscatter diffraction (EBSD). The correlation of the experimental and simulation work allows for a better understanding of how the input parameters in the simulations correspond to what occurs experimentally. Results from both simulations and experiments showed that a higher fraction of so-called “special” boundaries (e.g., Σ3 twin boundaries) delayed the onset of recrystallization to larger strains and that it is energetically favorable for nuclei to form on triple junctions without these so-called “special” boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. T. Sakai and J.J. Jonas: Acta Metall. Mater., 1984, vol. 32, pp.189–209.10.1016/0001-6160(84)90049-X ↗
2. D. Ponge and G. Gottstein: Acta Mater., 1998, vol. 46, pp. 69-80.10.1016/S1359-6454(97)00233-4 ↗
3. M. Jafari and A. Najafizadeh: Mat. Sci. Eng. A-Struct., 2009, vol. 504, pp 16-25.10.1016/j.msea.2008.09.073 ↗
4. M.E. Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado: Acta. Mater., 2005, vol. 53, pp. 4605-12.10.1016/j.actamat.2005.06.020 ↗
5. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130-207.10.1016/j.pmatsci.2013.09.002 ↗
6. J. J. Jonas, C.M. Sellars, W.J.M.G. Tegart: Metall Rev., 1969, vol. 14, pp. 1-24.10.1179/095066069790138056 ↗
7. S. Sakui, T. Sakai, and K. Takeishi: Trans ISIJ, 1977, vol. 17, pp. 718-25.10.2355/isijinternational1966.17.718 ↗
8. C.M. Sellars: Philos. T. Roy. Soc. A, 1978, vol. 288, pp. 147-58.10.1098/rsta.1978.0010 ↗
9. T. Sakai: J. Mater. Process Tech., 1995, vol. 53, pp. 349-61.10.1016/0924-0136(95)01992-N ↗
10. B. Derby: Acta Metall. Mater., 1991, vol. 39, pp. 955-62.10.1016/0956-7151(91)90295-C ↗
11. A. Belyakov, H. Miura, and T. Sakai: Scripta Mater., 2000, vol. 43, pp. 21-26.10.1016/S1359-6462(00)00373-0 ↗
12. R. Sandstrom and r. Lagneborg: Scripta Metall. Mater., 1975, vol. 9, pp. 59–65.10.1016/0036-9748(75)90146-5 ↗
13. T. Maki, K. Akasaka, K. Okuno, and I. Tamura: Trans ISIJ, 1982, vol. 22, pp. 253-61.10.2355/isijinternational1966.22.253 ↗
14. M. Luton and C.M. Sellars: Acta Metall. Mater., 1969, vol. 17, pp. 1033-43.10.1016/0001-6160(69)90049-2 ↗
15. A. D. Rollett: Prog. Mater. Sci., 1997, vol. 42, pp. 79-99.10.1016/S0079-6425(97)00008-X ↗
16. M.E. Wahabi, J.M. Cabrera, and J.M. Prado: Mat. Sci. Eng. A-Struct., 2003, vol. 343, pp. 116-25.10.1016/S0921-5093(02)00357-X ↗
17. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 1 st ed., Elsevier Science Ltd., Oxford, 1995, 363-92.
18. H. Miura, T. Sakai, S. Andiarwanto, and J.J. Jonas: Philos. Mag., 2005, vol. 85, pp. 2653-69.10.1080/14786430500154257 ↗
19. H. Miura, T. Sakai, and J.J. Jonas: Scripta Mater., 2006, vol. 55, pp. 197-70.10.1016/j.scriptamat.2006.03.063 ↗
20. H. Miura, M. Ozama, R. Mogawa, and T. Sakai, Scripta Mater., 2003, vol. 48, pp. 1501-05.10.1016/S1359-6462(03)00053-8 ↗
21. H. Miura, T. Sakai, R. Mogawa, and G. Gottstein: Scripta Mater., 2004, vol. 51, pp. 671-75.10.1016/j.scriptamat.2004.06.015 ↗
22. A.M. Wusatowska-Sarnek, H. Miura, and T. Sakai: Mat. Sci. Eng. A-Struct., 2002, vol. 323, pp. 177-86.10.1016/S0921-5093(01)01336-3 ↗
23. M. Hasegawa, M. Yamamoto, and H. Fukutomi: Acta Mater., 2003, vol. 51, pp. 3939-50.10.1016/S1359-6454(03)00218-0 ↗
24. P. Karduck, G. Gottstein, and H. Mecking: Acta Metall., 1983, vol. 31, pp. 1525-36.10.1016/0001-6160(83)90149-9 ↗
25. P. Poelt, C. Sommitsch, S. Mitsche, and M. Walter: Mat. Sci. Eng. A-Struct, 2006, vol. 420, pp. 306-14.10.1016/j.msea.2006.01.076 ↗
26. M.J. Luton and C.M. Sellars: Acta Metall. Mater., 1969, vol. 17, pp. 1033-43.10.1016/0001-6160(69)90049-2 ↗
27. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127-36.10.1016/1359-6454(95)00146-7 ↗
28. G. Shen, S.L. Semiatin, and R. Shivpuri: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1795-1803.10.1007/BF02670767 ↗
29. Y.S. Na, J.T. Yeom, N.K. Park, and J.Y. Lee: Metall. Mater. Trans. A, 2006, vol 37, pp. 41-47.10.1007/s11661-006-0150-7 ↗
30. W. Aretz, D. Ponge, and G. Gottstein: Scripta Metall. Mater., 1992, vol. 27, pp. 1593-98.10.1016/0956-716X(92)90150-D ↗
31. E. Brunger, X. Wang, and G. Gottstein: Scripta Mater., 1998, vol. 38, pp. 1843-49.10.1016/S1359-6462(98)00124-9 ↗
32. W. Roberts, H. Boden, and B. Ahlblom: Met. Sci., 1979, vol. 13, pp. 195-05.10.1179/msc.1979.13.3-4.195 ↗
33. X. Wang, E. Brunger, and G. Gottstein: Mat. Sci. Eng. A-Struct, 2000, vol. 290, pp. 180-85.10.1016/S0921-5093(00)00915-1 ↗
34. X. Wang, E. Brunger, and G. Gottstein: Scripta Mater., 2002, vol. 46, pp. 875-80.10.1016/S1359-6462(02)00072-6 ↗
35. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331-41.10.1016/S1359-6454(02)00064-2 ↗
36. E.M. Lehockey, G. Palumbo, P. Lin, and A. Brennenstuhl: Metall. Mater. Trans. A, 1998, vol. 29, pp. 387-96.10.1007/s11661-998-0190-2 ↗
37. E.M. Lehockey and G. Palumbo: Mat. Sci. Eng. A-Struct., 1997, vol. 237, pp. 168-72.10.1016/S0921-5093(97)00126-3 ↗
38. G. Gupta, B. Alexandreanu, and G.S Was: Metall. Mater. Trans. A, 2004, vol. 35, pp. 717–19.10.1007/s11661-004-0382-3 ↗
39. C.J. Boehlert, D.S. Dickmann, and N.C. Eisinger: Metall. Mater. Trans. A, 2006, vol. 37, pp. 27-40.10.1007/s11661-006-0149-0 ↗
40. A. Goyal, D.P. Norton, D.M. Kroeger, D.K. Christen, M. Paranthaman, E.D. Specht, J.D. Budai, Q. He, B. Saffian, F.A. List, D.F. Lee, E. Hatfield, P.M. Martin, C.E. Klabunde, J. Mathis, and C. Park: J. Mater. Res., 1997, vol. 12, pp. 2924-40.10.1557/JMR.1997.0387 ↗
41. D.P. Norton, A. Goyal, J.D. Budai, D.K. Christen, D.M. Kroeger, E.D. Specht, Q. He, B. Saffian, M. Paranthaman, C.E. Klabunde, D.F. Lee, B.C. Sales, and F.A. List: Science, 1996, vol. 274, pp. 755-57.10.1126/science.274.5288.755 ↗
42. D.G. Brandon: Acta Metall. Mater., 1966, vol. 14, pp. 1479-84.10.1016/0001-6160(66)90168-4 ↗
43. H. Miura, S. Andiarwanto, and T. Sakai: Thermec’2003, Pts 1-5, 2003, pp. 4387–92.10.4028/www.scientific.net/MSF.426-432.4387 ↗
44. H. Miura, S. Andiarwanto, T. Sakai, and J.J. Jonas: Icotom 14, Pts 1 and 2, 2005, pp. 1159–64.10.4028/0-87849-975-x.1159 ↗
45. H. Miura, T. Sakai, H. Hamaji, and J.J. Jonas: Scripta Mater., 2004, vol. 50, pp. 65-69.10.1016/j.scriptamat.2003.09.035 ↗
46. F.J. Humphreys: Mater. Sci. Forum, 2004, vol. 467-470, pp. 107-16.10.4028/www.scientific.net/MSF.467-470.107 ↗
47. C.R. Chen, S.X. Li, J. L. Wen, and W.P. Jia: Mat. Sci. Eng. A-Struct., 2000, vol. 282, pp. 170-76.10.1016/S0921-5093(99)00760-1 ↗
48. S.R. Skjervold and N. Ryum: Acta Mater., 1996, vol. 44, pp. 3407-19.10.1016/1359-6454(95)00413-0 ↗
49. S. Mandal, A.K. Bhaduri, and V. S. Sarma: Metall. Mater. Trans. A, 2012, vol. 43, pp 2056-68.10.1007/s11661-011-1012-5 ↗
50. H. Hallberg: Metals, 2011, vol. 1, pp. 16-48.10.3390/met1010016 ↗
51. Y. Zhang, S. Jiang, Y. Liang, and L. Hu: Comp. Mater. Sci., 2013, vol. 71, pp. 124-34.10.1016/j.commatsci.2013.01.019 ↗
52. F. Chen, K. Qi, Z. Cui, and Z. Lai: Comp. Mater. Sci., 2014, vol. 83, pp. 331-40.10.1016/j.commatsci.2013.11.029 ↗
53. E. Popova, Y. Staraselski, A. Brahme, R.K. Mishra, and K. Inal: Int. J. Plasticity, 2015, vol 66, pp. 85-102.10.1016/j.ijplas.2014.04.008 ↗
54. E.R. Homer, V. Tikare, and E.A. Holm: Comp. Mater. Sci., 2013, vol. 69, pp. 414-23.10.1016/j.commatsci.2012.11.056 ↗
55. H. Hallberg: Model. Simul. Mater. Sc., 2013, vol. 21, pp. 1-25.10.1088/0965-0393/21/8/085012 ↗
56. S. Hore, S.K. Das, S. Banerjee, and S. Mukherjee: Acta Mater., 2013, vol. 61, pp. 7251-59.10.1016/j.actamat.2013.08.030 ↗
57. A.D. Rollett, M.J. Luton, and D.J. Srolovitz: Acta Metall. Mater., 1992, vol. 40, pp. 43-55.10.1016/0956-7151(92)90198-N ↗
58. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mat. Sci. Eng. A-Struct, 1997, vol. 238, pp. 219-74.10.1016/S0921-5093(97)00424-3 ↗
59. P. Peczak and M. Luton: Acta Metall. Mater., 1993, vol. 41, pp. 59.10.1016/0956-7151(93)90339-T ↗
60. R.A. Petkovic, M.J. Luton, and J.J. Jonas: Can. Metall. Quart., 1975, vol. 14, pp. 137-45.10.1179/000844375795050201 ↗
61. J.J. Jonas: Mat. Sci. Eng. A-Struct., 1994, vol. 184, pp. 155-65.10.1016/0921-5093(94)91028-6 ↗
62. ASTM Standard A240-A240M, 2013c.