journal article·2017-07

Effect of Thermomechanical Processing on Microstructure, Texture Evolution, and Mechanical Properties of Al-Mg-Si-Cu Alloys with Different Zn Contents

X. F. Wang, M. X. Guo, Y. Chen, J. Zhu, J. S. Zhang, L. Z. Zhuang

Publisher page

Abstract

The effect of thermomechanical processing on microstructure, texture evolution, and mechanical properties of Al-Mg-Si-Cu alloys with different Zn contents was studied by mechanical properties, microstructure, and texture characterization in the present study. The results show that thermomechanical processing has a significant influence on the evolution of microstructure and texture and on the final mechanical properties, independently of Zn contents. Compared with the T4P-treated (first preaged at 353 K (80 °C) for 12 hours and then naturally aged for 14 days) sheets with high final cold rolling reduction, the T4P-treated sheets with low final cold rolling reduction possess almost identical strength and elongation and higher average r values. Compared with the intermediate annealed sheets with high final cold rolling reduction, the intermediate annealed sheets with low final cold rolling reduction contain a higher number of particles with a smaller size. After solution treatment, in contrast to the sheets with high final cold rolling reduction, the sheets with low final cold rolling reduction possess finer grain structure and tend to form a weaker recrystallization texture. The recrystallization texture may be affected by particle distribution, grain size, and final cold rolling texture. Finally, the visco-plastic self-consistent (VPSC) model was used to predict r values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J. Hirsch and T. Al-Samman: Acta Mater., 2013, vol. 61, pp. 818–43.10.1016/j.actamat.2012.10.044 ↗
2. G. Davies: Materials for Automobile Bodies, Pergamon Press, Oxford, 2003, pp. 87–90.
3. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge: Mater. Sci. Eng., 2000, vol. A280, pp. 37–49.10.1016/S0921-5093(99)00653-X ↗
4. J.J. Sidor, R.H. Petrov, and L.A.I. Kestens: Mater. Sci. Eng., 2010, vol. A528, pp. 413–24.10.1016/j.msea.2010.09.023 ↗
5. J.J. Sidor, A. Miroux, R. Petrov, and L. Kestens: Philos. Mag., 2008, vol. 88, pp. 3779–92.10.1080/14786430802064659 ↗
6. O. Engler and J. Hirsch: Mater. Sci. Eng., 2002, vol. A336, pp. 249–62.10.1016/S0921-5093(01)01968-2 ↗
7. H. Inoue, T. Yamasaki, G. Gottstein, P.V. Houtte, and T. Takasugi: Mater. Sci. Forum, 2005, vols. 495–497, pp. 573–78.10.4028/www.scientific.net/MSF.495-497.573 ↗
8. H. Inoue and T. Takasugi: Mater. Trans., 2007, vol. 48, pp. 2014–22.10.2320/matertrans.L-MRA2007871 ↗
9. X.F. Wang, M.X. Guo, A. Chaupis, J.R. Luo, J.S. Zhang, and L.Z. Zhuang: Mater. Sci. Eng., 2015, vol. A633, pp. 46–58.10.1016/j.msea.2015.02.029 ↗
10. X.F. Wang, M.X. Guo, L.Y. Cao, J.R. Luo, J.S. Zhang, and L.Z. Zhuang: Mater. Sci. Eng., 2015, vol. A621, pp. 8–17.10.1016/j.msea.2014.10.045 ↗
11. X.F. Wang, M.X. Guo, Y. Zhang, H. Xing, Y. Li, J.R. Luo, J.S. Zhang, and L.Z. Zhuang: J. Alloy Compd., 2016, vol. 657, pp. 906–16.10.1016/j.jallcom.2015.10.070 ↗
12. J. Sidor, K. Decroos, R.H. Petrov, and L.A.I. Kestens: Int. J. Plasticity, 2015, vol. 66, pp. 119–37.10.1016/j.ijplas.2014.08.009 ↗
13. L. Zhuang, J. Bottema, P. Kaasenbrood, W.S. Miller, and P. De Smet: Mater. Sci. Forum, 1996, vols. 217–222, pp. 487–92.10.4028/www.scientific.net/MSF.217-222.487 ↗
14. X.F. Wang, M.X. Guo, J.S. Zhang, and L.Z. Zhuang: Mater. Sci. Eng., 2016, vol. A677, pp. 522–33.10.1016/j.msea.2016.09.084 ↗
15. T. Saito, S. Wenner, E. Osmumdsen, C.D. Marioara, S.J. Andersen, J. Røyset, W. Lefebvre, and R. Holmestad: Philos. Mag., 2014, vol. 94, pp. 2410–25.10.1080/14786435.2014.913819 ↗
16. Y.H. Cai, C. Wang, and J.S. Zhang: Int. J. Min. Met. Mater., 2013, vol. 20, pp. 659–64.10.1007/s12613-013-0780-x ↗
17. X.P. Ding, H. Cui, J.X. Zhang, H.X. Li, M.X. Guo, Z. Lin, L.Z. Zhuang, and J.S. Zhang: Mater. Des., 2015, vol. 65, pp. 1229–35.10.1016/j.matdes.2014.09.086 ↗
18. W.C. Liu and J. G. Morris: Mater. Sci. Eng., 2003, vol. A339, pp. 183–93.10.1016/S0921-5093(02)00160-0 ↗
19. W.C. Liu and J. G. Morris: Scripta Mater., 2002, vol. 47, pp. 743–48.10.1016/S1359-6462(02)00195-1 ↗
20. R.A. Lebensohn and C.N. Tome: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
21. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, 2nd ed., Pergamon Press, Oxford, United Kingdom, 2004, pp. 390–93.
22. H.E. Vatne, O. Engler, and E. Nes: Mater. Sci. Technol.,1997, vol. 13, pp. 1112–20.10.1179/mst.1997.13.2.93 ↗
23. S.J. Lillywhite, P.B. Prangnell, and F.J. Humphreys: Mater. Sci. Technol., 2000, vol. 16, pp. 93–102.10.1179/026708300101507037 ↗
24. O. Engler: Mater. Sci. Technol., 1996, vol. 12, pp. 859–72.10.1179/mst.1996.12.10.859 ↗
25. O. Engler: Acta Mater., 1998, vol. 46, pp. 1555–68.10.1016/S1359-6454(97)00354-6 ↗
26. K. Lücke and O. Engler: Mater. Sci. Technol., 1990, vol. 6, pp. 1113–30.10.1179/mst.1990.6.11.1113 ↗
27. O. Engler, X.W. Kong, and P. Yang: Scripta Mater., 1997, vol. 37, pp. 1665–74.10.1016/S1359-6462(97)00315-1 ↗
28. T.A. Bennett, R.H. Petrov, and L.A.I. Kestens: Scripta Mater., 2010, vol. 62, pp. 78–81.10.1016/j.scriptamat.2009.09.032 ↗
29. J. Sidor, A. Miroux, R. Petrov, and L. Kestens: Acta Mater., 2008, vol. 56, pp. 2495–2507.10.1016/j.actamat.2008.01.042 ↗
30. Y.S. Liu, S.B. Kang, and H.S. Ko: Scripta Mater., 1997, vol. 37, pp. 411–17.10.1016/S1359-6462(97)00102-4 ↗
31. P. Van Houtte, A. Krishna Kanjarla, A. Van Bael, M. Seefeldt, and L. Delannay: Eur. J. Mech. A–Solids, 2006, vol. 25, pp. 634–48.10.1016/j.euromechsol.2006.05.003 ↗
32. P. Van Houtte, S. Li, A. Van Bael, M. Seefeldt, and L. Delannay: Int. J. Plasticity, 2005, vol. 21, pp. 589–624.10.1016/j.ijplas.2004.04.011 ↗
33. S. Li, E. Hoferlin, A. Van Bael, P. Van Houtte, and C. Teodosiu: Int. J. Plasticity, 2003, vol. 19, pp. 647–74.10.1016/S0749-6419(01)00079-1 ↗
34. O. Engler, M.Y. Huh, and C.N. Tome: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2299–2315.10.1007/s11661-000-0146-7 ↗
35. O. Engler and S. Kalz: Mater. Sci. Eng., 2004, vol. A373, pp. 350–62.10.1016/j.msea.2004.02.003 ↗