journal article·2017-02

Selective Separation of Fe-Concentrates in EAF Slags Using Mechanical Dissimilarity of Solid Phases

Sung Suk Jung, Keeyoung Jung, Il Sohn

Publisher page

Abstract

We sought to develop an optimized particle size-dependent separation method to lower the Fe content of pulverized glass-ceramic electric arc furnace (EAF) slag for its improved reclamation as construction materials by considering the structures and the mechanical behavior of the discrete solid phases. After an isothermal crystallization process to enhance the spinel growth, the Vickers hardness and fracture toughness were measured on the spinel and amorphous phases separately from the solidified slag using indentation methods. The characteristic differences in the hardness of the phases were magnified when this glass-ceramic composite was isothermally crystallized. The hardness of the spinel was observed to be lower in slags with higher FetO/Al2O3 mass ratios due to the triclinic unit cell expansion of the spinel, whereas the hardness of the amorphous phase decreased with increasing isothermal period because of the structural transformation into a silicate-dominant network. Fracture toughness could be calculated based on the hardness and crack length, where the Young’s modulus was determined using nanoindentation. The amorphous phase with a lower Fe content and lower fracture toughness resulted in finer powder distribution after pulverization, allowing better separation of the primary crystalline spinel containing higher Fe content from the Fe-deficient amorphous phase according to the particle size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metallurgical Processes and Thermodynamics · Minerals Flotation and Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. 1. R. Taylor, I. Richardson and R. Brydson: Cem. Concr. Res., 2010, vol. 40, pp. 971-983.10.1016/j.cemconres.2010.02.012 ↗
2. 2. J.I. Escalante-Garcia, L.J. Espinoza-Perez, A. Gorokhovsky and L.Y. Gomez-Zamorano: Construction and Building Materials, 2009, vol. 23, pp. 2511-2517.10.1016/j.conbuildmat.2009.02.002 ↗
3. 3. J. Zhou, S. Qian, M.G.S. Beltran, G. Ye, K. van Breugel and V.C. Li: Mater. Struct., 2010, vol. 43, pp. 803-814.10.1617/s11527-009-9549-0 ↗
4. 4. C. Shi, A.F. Jiménez and A. Palomo: Cem. Concr. Res., 2011, vol. 41, pp. 750-763.10.1016/j.cemconres.2011.03.016 ↗
5. 5. H.-S. Kim, K.-S. Kim, S.S. Jung, J.I. Hwang, J.-S. Choi and I. Sohn: Waste Manage. (Oxford), 2015, vol. 41, pp. 85-93.10.1016/j.wasman.2015.03.019 ↗
6. 6. P. Tsakiridis, G. Papadimitriou, S. Tsivilis and C. Koroneos: J. Hazard. Mater., 2008, vol. 152, pp. 805-811.10.1016/j.jhazmat.2007.07.093 ↗
7. 7. J.M. Manso, J.A. Polanco, M. Losanez and J.J. González: Cem. Concr. Compos., 2006, vol. 28, pp. 528-534.10.1016/j.cemconcomp.2006.02.008 ↗
8. 8. R. Sarkar, N. Singh and S.D. Kumar: Bull. Mater. Sci., 2010, vol. 33, pp. 293-298.10.1007/s12034-010-0045-5 ↗
9. 9. L. Muhmood, S. Vitta and D. Venkateswaran: Cem. Concr. Res., 2009, vol. 39, pp. 102-109.10.1016/j.cemconres.2008.11.002 ↗
10. 10. B. Lothenbach, T. Matschei, G. Möschner and F.P. Glasser: Cem. Concr. Res., 2008, vol. 38, pp. 1-18.10.1016/j.cemconres.2007.08.017 ↗
11. Steel Statistical Yearbook 2015 (2015), http://www.worldsteel.org/dms/internetDocumentList/bookshop/2015/Steel-Statistical-Yearbook-2015/document/Steel%20Statistical%20Yearbook%202015.pdf accessed 15.08.29.
12. 12. H. Kim, H. Matsuura, F. Tsukihashi, W. Wang, D.J. Min and I. Sohn: Metallurgical and Materials Transactions B, 2013, vol. 44, pp. 5-12.10.1007/s11663-012-9759-7 ↗
13. 13. S.S. Jung and I. Sohn: Environmental science & technology, 2014, vol. 48, pp. 1886-1892.10.1021/es404277w ↗
14. 14. K. Morita, A. Umezawa, S. Yamato and A. Makishima: J. Am. Ceram. Soc., 1993, vol. 76, pp. 1861-1864.10.1111/j.1151-2916.1993.tb06661.x ↗
15. 15. M. Iqbal and B. Mohanty: Rock Mechanics and Rock Engineering, 2007, vol. 40, pp. 453-475.10.1007/s00603-006-0107-6 ↗
16. 16. K. Sangwal: Cryst. Res. Technol., 2009, vol. 44, pp. 1019-1037.10.1002/crat.200900385 ↗
17. 17. G.D. Quinn and R.C. Bradt: J. Am. Ceram. Soc., 2007, vol. 90, pp. 673-680.10.1111/j.1551-2916.2006.01482.x ↗
18. 18. H. Yilmaz, C. Aydin and B.E. Gul: The Journal of prosthetic dentistry, 2007, vol. 98, pp. 120-128.10.1016/S0022-3913(07)60045-6 ↗
19. 19. C. Rios, A. Coelho, W. Batista, M. Goncalves and R. Caram: J. Alloys Compd., 2009, vol. 472, pp. 65-70.10.1016/j.jallcom.2008.04.016 ↗
20. 20. M. Öveçoğlu J. Eur. Ceram. Soc., 1998, vol. 18, pp. 161-168.10.1016/S0955-2219(97)00094-0 ↗
21. 21. G. Anstis, P. Chantikul, B.R. Lawn and D. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533-538.10.1111/j.1151-2916.1981.tb10320.x ↗
22. 22. J.P. Guin, T. Rouxel, J.C. Sanglebœuf, I. Melscoët and J. Lucas: J. Am. Ceram. Soc., 2002, vol. 85, pp. 1545-1552.10.1111/j.1151-2916.2002.tb00310.x ↗
23. 23. S. Griesser, M. Reid, C. Bernhard and R. Dippenaar: Acta Mater., 2014, vol. 67, pp. 335-341.10.1016/j.actamat.2013.12.018 ↗
24. 24. G. Pharr, W. Oliver and F. Brotzen: J. Mater. Res., 1992, vol. 7, pp. 613-617.10.1557/JMR.1992.0613 ↗
25. 25. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564-1583.10.1557/JMR.1992.1564 ↗
26. 26. W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3-20.10.1557/jmr.2004.19.1.3 ↗
27. 27. S. Semboshi, T. Tabaru, H. Hosoda and S. Hanada: Intermetallics, 1998, vol. 6, pp. 61-69.10.1016/S0966-9795(97)00058-7 ↗
28. 28. J.G. Duh, H.T. Dai and B.S. Chiou: J. Am. Ceram. Soc., 1988, vol. 71, pp. 813-819.10.1111/j.1151-2916.1988.tb07528.x ↗
29. 29. M. Yamane and J. Mackenzie: J. Non-Cryst. Solids, 1974, vol. 15, pp. 153-164.10.1016/0022-3093(74)90044-1 ↗
30. 30. T. Rouxel, H. Ji, V. Keryvin, T. Hammouda and S. Yoshida: Advanced Materials Research, 2008, vol. 39, pp. 137-146.10.4028/www.scientific.net/AMR.39-40.137 ↗
31. 31. M. Krzyzanowski, J.H. Beynon and D.C. Farrugia: Oxide Scale Behavior in High Temperature Metal Processing. first ed. John Wiley & Sons, New Jersey, 2010.10.1002/9783527630318 ↗
32. 32. F. Branda, F. Arcobello-Varlese, A. Costantini and G. Luciani: J. Non-Cryst. Solids, 1999, vol. 246, pp. 27-33.10.1016/S0022-3093(99)00039-3 ↗
33. 33. L. Stoch and M. Środa: J. Mol. Struct., 1999, vol. 511-512, pp. 77-84.10.1016/S0022-2860(99)00146-5 ↗
34. 34. S. Ueda, H. Koyo, T. Ikeda, Y. Kariya and M. Maeda: ISIJ Int., 2000, vol. 40, pp. 739-743.10.2355/isijinternational.40.739 ↗
35. 35. G. Leekes, N. Nowack and F. Schlegelmilch: Steel Res., 1988, vol. 59, pp. 406-416.10.1002/srin.198801533 ↗
36. 36. P.F. McMillan, W.T. Petuskey, B. Coté, D. Massiot, C. Landron and J.-P. Coutures: J. Non-Cryst. Solids, 1996, vol. 195, pp. 261-271.10.1016/0022-3093(95)00536-6 ↗
37. 37. C. Huang and E. Behrman: J. Non-Cryst. Solids, 1991, vol. 128, pp. 310-321.10.1016/0022-3093(91)90468-L ↗
38. 38. P. Tarte: Spectrochimica Acta Part A: Molecular Spectroscopy, 1967, vol. 23, pp. 2127-2143.10.1016/0584-8539(67)80100-4 ↗
39. 39. V. Kreitsberga, V. Chekhovskii, A. Sizonenko, Y.Y. Keishs, S. Redala and P. Pauksh: Fizika i Khimiya Stekla, 1991, vol. 17, pp. 953-957.
40. 40. F. Martignago, G. Andreozzi and A. Dal Negro: Am. Mineral., 2006, vol. 91, pp. 306-312.10.2138/am.2006.1880 ↗
41. 41. F. Martignago, A. Dal Negro and S. Carbonin: Phys. Chem. Miner., 2003, vol. 30, pp. 401-408.10.1007/s00269-003-0336-0 ↗
42. Database of ionic radii, 2015, http://abulafia.mt.ic.ac.uk/shannon/ptable.php, accessed 13.09.15.
43. 43. F. Allen, D. Watson, L. Brammer, A. Orpen and R. Taylor: International Tables for Crystallography. first ed. Springer, Dordrecht, 2006, pp. 710.
44. 44. B.O. Mysen, D. Virgo and F.A. Seifert: Rev. Geophys., 1982, vol. 20, pp. 353-383.10.1029/RG020i003p00353 ↗
45. F. Gao: Physical Review B, 2004, vol. 69, pp. 094113-1-094113-6.
46. 46. F. Gao, J. He, E. Wu, S. Liu, D. Yu, D. Li, S. Zhang and Y. Tian: Phys. Rev. Lett., 2003, vol. 91, pp. 015502-1-015502-4.10.1103/PhysRevLett.91.015502 ↗
47. 47. K. Niihara, R. Morena and D. Hasselman: J. Mater. Sci. Lett., 1982, vol. 1, pp. 13-16.10.1007/BF00724706 ↗
48. 48. T. Rouxel, H. Ji, T. Hammouda and A. Moréac: Phys. Rev. Lett., 2008, vol. 100, pp. 225501-1-225501-4.10.1103/PhysRevLett.100.225501 ↗