Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001}$$ \left\langle {100} \right\rangle $$) Polycrystalline Nickel Sheet
Source abstract
Abstract
The evolution of microstructure and texture is studied during the heavy cold rolling and annealing of a highly cube-textured ({001}\( \left\langle {100} \right\rangle \)) polycrystalline nickel sheet. Near and intermediate cube grains (≤5 deg and 5 deg to 10 deg misorientation, respectively, with exact cube orientation) are more unstable up to 60 pct reduction compared with the far cube grains (10 deg to 15 deg misorientation), and they rotate away to a rolling direction (RD)-rotated cube orientation ({013}\( \left\langle {100} \right\rangle , \) denoted by CRD). In contrast, beyond 60 pct reduction, near and intermediate cube grains are more stable than far cube grains, which results in an overall increase in the stability of cube orientation. After 90 pct cold rolling, several cube bands adjacent to or surrounded by CRD bands and separated by low-angle grain boundaries (LAGBs) over large part of their lengths are observed. After annealing of the 90 pct rolled material, no cube texture formation is observed, which is attributed to the delayed nucleation of cube grains owing to the unfavorable structure and local misorientation environment surrounding cube bands.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassener, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
2. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, U.K., 2004.
3. A. Goyal, M.P. Paranthaman, and U. Schoop: MRS Bull., 2004, vol. 29, pp. 552–61.10.1557/mrs2004.161 ↗
4. R.D. Doherty: Progr. Mater. Sci., 1997, vol. 42, pp. 39–58.10.1016/S0079-6425(97)00007-8 ↗
5. A.A. Ridha and W.B. Hutchinson: Acta Metall., 1982, vol. 30, pp. 1929–39.10.1016/0001-6160(82)90033-5 ↗
6. P.P. Bhattacharjee, R.K. Ray, and N. Tsuji: Acta Mater., 2009, vol. 57, pp. 2166–79.10.1016/j.actamat.2009.01.015 ↗
7. S. Zaefferer, T. Baudin, and R. Penelle: Acta Mater., 2001, vol. 49, pp. 1105–22.10.1016/S1359-6454(00)00387-6 ↗
8. R.D. Doherty: Scripta Metall., 1985, vol. 19, pp. 927–30.10.1016/0036-9748(85)90284-4 ↗
9. I. Dillamore and H. Katoh: Met. Sci. J., 1974. vol. 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
10. T. Kamijo, H. Adachihara, H. Fukutomi, and E. Aernoudt: Acta Metall. Mater., 1992, vol. 40, pp. 693–98.10.1016/0956-7151(92)90010-C ↗
11. H.E. Vatne, T. Furu, and E. Nes: Mater. Sci. Technol., 1996, vol. 12, pp. 201–10.10.1179/026708396790165678 ↗
12. H. Klein and H.J. Bunge: Advances and Applications of Quantitative Texture Analysis, H.J. Bunge, ed., DGM, Oberursel, Germany, 1989.
13. S. Kikuchi, E. Kimura, and M. Koiwa: J. Mater. Sci., 1992, vol. 27, pp. 4927–34.10.1007/BF01105255 ↗
14. C. Hartig and M. Feller-Kniepmeier: Acta Metall., 1985, vol. 33, pp. 743–52.10.1016/0001-6160(85)90097-5 ↗
15. R.K. Bolingbroke, G.J. Marshall, and R.A. Ricks: The Fourth Int. Conf. on Aluminum Alloys, T. Sanders and E. Starke, eds., Georgia Institute of Technology, Atlanta, GA, 1996, p. 243.
16. R.K. Bolingbroke, G.J. Marshall, R.A. Ricks (1994) Mater. Sci. Forum 157–162:1145–51.10.4028/www.scientific.net/MSF.157-162.1145 ↗
17. N. Tsuji, Y. Saito, S.-H. Lee, and Y. Minamino: Adv. Eng. Mater., 2003, vol. 5, pp. 338–44.10.1002/adem.200310077 ↗
18. P.P. Bhattacharjee and N. Tsuji: Int. J. Mater. Res., 2011, vol. 102, pp. 173–82.10.3139/146.110465 ↗
19. D.A. Hughes and N. Hansen: Philos. Mag., 2003, vol. 83, pp. 3871–93.10.1080/14786430310001605560 ↗
20. S.I. Wright, D.P. Field, and D.J. Dingley: Electron Backscatter Diffraction in Materials Science, Academic/Plenum Publishers, New York, NY, 2000, pp. 141–52.10.1007/978-1-4757-3205-4_13 ↗
21. I. Samajdar and R.D. Doherty: Acta Mater., 1998, vol. 46, pp. 3145–58.10.1016/S1359-6454(97)00492-8 ↗
22. R.D. Doherty, L.-C. Chen, and I. Samajdar: Mater. Sci. Eng. A., 1998, vol. 257, pp. 18–36.10.1016/S0921-5093(98)00821-1 ↗
23. C.A. Verbraak: Acta Metall., 1958, vol. 6, pp. 580–97.10.1016/0001-6160(58)90100-7 ↗