journal article·2016-05

Effect of Heating Rate on the Pressureless Sintering Densification of a Nickel-Based Superalloy

David Levasseur, Mathieu Brochu

Publisher page

Abstract

Pressureless sintering of Inconel 718 has important technological applications for the densification of metal injection molding or additive manufacturing of parts with powder/binder systems. The effect of heating rates ranging from 15 to 200 K/minute on the sintering behavior of fine (−325 mesh) Inconel 718 powders was studied using the master sintering curve (MSC) concept. A pressureless pulsed electric current sintering setup was used to heat samples. The temperature at the onset of sintering increased as the heating rate increased. The formation of a supersolidus liquid fraction was shifted toward higher temperatures for increased heating rates. The apparent activation energy of sintering was obtained by least squares fitting of the sintering data to the MSC and was in good agreement with the lattice diffusion activation energy of the alloying elements present in Inconel 718. The MSC followed different kinetics for low heating rates (≤50 K/minute) and high heating rates (≥75 K/minute), and these differences were related to liquation kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Injection Molding Process and Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. B. Geddes, H. Leon, and X. Huang: ASM International, Materials Park, OH, 2010, pp. xii, 176.
2. G.H. Gessinger: Powder Metallurgy of Superalloys, Butterworths, London, 1984.
3. [3] V. Demers, S. Turenne, O. Scalzo, J. Mater. Sci., 2015, vol. 50(7), pp. 2893-2902.10.1007/s10853-015-8853-z ↗
4. J.J. Valencia, J. Spirko, and R. Schmees: Superalloys 718, 625, 706 and Various Derivatives, 1997, pp. 753–62.10.7449/1997/Superalloys_1997_753_762 ↗
5. H. Wohlfromm, A. Ribbens, J. Maat, M. Blomacher: in Proceedings Euro PM2003 Congr. Exhib., 2003, vol. 3, pp. 207–15.
6. [6] O. Özgün, H.O. Gulsoy, R. Yilmaz, F. Findik, J Alloy Compd., 2013, vol. 576, pp. 140-153.10.1016/j.jallcom.2013.04.042 ↗
7. L. Chang, W. Sun, Y. Cui, F. Zhang, R. Yang, J. Alloys Compd., 2014, vol. 590, pp. 227-232.10.1016/j.jallcom.2013.12.107 ↗
8. [8] A. Guyon, D. Bouvard, J.M. Chaix, C.P. Carry, Powder Metallurgy 2014; 57(1), 54-60.10.1179/1743290113Y.0000000069 ↗
9. [9] R. Yamanoglu, W. Bradbury, E. Karakulak, E.A. Olevsky, R.M. German, Powder Metall., 2014, vol. 57(5), pp. 380-386.10.1179/1743290114Y.0000000088 ↗
10. [10] P.A. Davies, R. Dunstan, R. Howells, A.C. Hayward: Adv. Powder Metall. Part. Mater., 2003, vol. 8, pp. 8-12.
11. R. Schmees, J.R. Spirko, and J. Valencia: in Proceedings of the Advanced Particulate Materials & Processes, 1997, pp. 493–99.
12. [12] H. Youhua, L. Yimin, H. Hao, L. Jia, T. Xiao, Rare Metal. Mat. Eng., 2010, vol. 39, pp. 775-780.10.1016/S1875-5372(10)60100-2 ↗
13. [13] M.J. Donachie, S.J. Donachie, Superalloys: a technical guide, 2nd ed., ASM International, Materials Park, OH, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
14. S.A.E. International: AMS 5662M 2009.
15. [15] H.H. Su, D.L. Johnson, J. Am. Ceram. Soc., 1996, vol. 79, pp. 3211-3217.10.1111/j.1151-2916.1996.tb08097.x ↗
16. [16] J.D. Hansen, R.P. Rusin, M.H. Teng, D.L. Johnson, J. Am. Ceram. Soc., 1992, vol. 75, pp. 1129-1135.10.1111/j.1151-2916.1992.tb05549.x ↗
17. [17] M.W. Reiterer, K.G.Ewsuk. J. Am. Ceram. Soc., 2009, vol. 92(7), pp. 1419-1427.10.1111/j.1551-2916.2009.03009.x ↗
18. [18] K.G. Ewsuk, D.T. Ellerby, C.B. DiAntonio, J. Am. Ceram. Soc., 2006, vol. 89(6), pp. 2003-2009.10.1111/j.1551-2916.2006.00990.x ↗
19. [19] S.J. Park, J.M. Martin, J.F. Guo, J.L. Johnson, R.M. German, Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2837-2848.10.1007/BF02586116 ↗
20. [20] J. Wang R. Raj, J. Am. Ceram. Soc., 1990, vol. 73(5), pp. 1172-1175.10.1111/j.1151-2916.1990.tb05175.x ↗
21. [21] K. Hajmrle, R. Angers, Int. J. Powder Metall., 1980, vol. 16, pp. 255-267.
22. K. Hajmrle: Forgeage d’ébauches poreuses d’Inconel 718 préparées par coulage en moule poreux et frittage. S.l: Université Laval, 1978. p. xxii, 413 f.
23. [23] W.L. Bradbury, E.A. Olevsky, Scripta Mater., 2010, vol. 63, pp. 77-80.10.1016/j.scriptamat.2010.03.009 ↗
24. [24] D.E. Garcia, D. Hotza, R. Janssen, Int. J. Appl. Ceram. Tec., 2011, vol. 8, pp. 1486-1493.10.1111/j.1744-7402.2011.02609.x ↗
25. [25] J.N. Sweet, E.P. Roth, M. Moss, Int. J. Thermophys., 1987, vol. 8, pp. 593-606.10.1007/BF00503645 ↗
26. [26] S.J. Park, S.H. Chung, J.M. Martín, J.L. Johnson, R.M. German, Metall. Mater. Trans. A, 2008, vol. 39, pp. 2941-2948.10.1007/s11661-008-9654-7 ↗
27. [27] T. Antonsson, H. Fredriksson, Metall. Mater. Trans. B, 2005, vol 36, pp. 85-96.10.1007/s11663-005-0009-0 ↗
28. [28] Z.Z. Fang, Sintering of advanced materials: fundamentals and processes, Woodhead Publishing, Oxford; Philadelphia, PA, 2010.10.1533/9781845699949 ↗
29. [29] F. Cherne, P. Deymier, Scripta Mater., 1998, vol. 39, pp. 1613-1616.10.1016/S1359-6462(98)00339-X ↗
30. P. Protopapas, H.C. Andersen, N. Parlee, J. Chem. Phys., 1973, vol. 59, pp. 15-25.10.1063/1.1679784 ↗
31. [31] K. Hirano, R.P. Agarwala, B.L. Averbach, M. Cohen, J. Appl. Phys., 1962, vol. 33(10), pp. 3049-3054.10.1063/1.1728564 ↗
32. R.A. Swalin: University Microfilm Publication No. 10043, Ann Arbor, Michigan.
33. S.P. Murarka, R.P. Agarwala, M.S. Anand, J. Appl. Phys., 1964, vol. 35, pp. 1339-1341.10.1063/1.1713615 ↗
34. [34] R.V. Patil, G.B. Kale, J. Nucl. Mater., 1996, vol. 230, pp. 57-60.10.1016/0022-3115(96)80010-9 ↗
35. [35] G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, W.F. Hammetter, Metall. Trans. A, 1989, vol. 20, pp. 2149-2158.10.1007/BF02650300 ↗
36. [36] X. Luo, S. Yoshihara, K. Shinozaki, M. Shirai, Weld. Res. Abroad, 2002, vol. 48, pp. 16-24.
37. [37] Y.C. Fayman, Mater. Sci. Eng., 1987, vol. 92, pp. 159-171.10.1016/0025-5416(87)90166-2 ↗
38. [38] W.D. Cao, R.L. Kennedy, M.P. Willis, Superalloys 718, 625 and Various Derivatives, TMS, Warrendale, PA, 1991, pp. 147-160.10.7449/1991/Superalloys_1991_147_160 ↗
39. [39] L. Nastac, D.M. Stefanescu, Metall. Mater. Trans. A, 1996, vol. 27, pp. 4075-4083.10.1007/BF02595656 ↗
40. [40] F. Duflos, J.F. Stohr, J. Mater. Sci., 1982, vol. 17, pp. 3641-3652.10.1007/BF00752209 ↗
41. R. Bollina, S.J. Park, R.M. German, Powder Metall., 2010, vol. 53, pp. 20-26.10.1179/174329009X409688 ↗