Microstructure and Mechanical Properties of Yttria-Stabilized Zirconia Coatings Produced by Eletrophoretic Deposition and Microwave Sintering
Source abstract
Abstract
Y2O3-stabilized zirconia coatings were deposited on superalloy K17 substrates at room temperature by the eletrophoretic deposition technique followed by two different sintering methods. Scanning electron microscopy, X-ray diffraction (XRD), and nanoindentation techniques were employed to characterize morphological, structural, and mechanical properties of the coatings. Finer and more uniform microstructures were observed in the microwave sintered coatings. For the conventionally sintered coatings, the monoclinic phase was observed. The microwave sintered coatings of Y2O3-stabilized zirconia contain mainly cubic/tetragonal phases with some metastable phase present. In comparison with the hardness of 3.1 GPa and elastic modulus of 83.5 GPa for conventional sintered coating, the hardness and elastic modulus for microwave sintered coating rapidly increased to 4.3 and 172.7 GPa, respectively. Such coatings have potential in being used as thermal barrier coatings (TBCs) on superalloy substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · High-Temperature Coating Behaviors · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. J. Blink, J. Framer, J. Choi, and C. Saw: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1344–54.10.1007/s11661-009-9830-4 ↗
2. M. Matsumoto, T. Kato, N. Yamaguchi, D. Yokoe, and H. Matsubara: Surf. Coat. Technol., 2009, vol. 203, pp. 2835–40.10.1016/j.surfcoat.2009.01.033 ↗
3. N. Zotov, M. Bartsch, and G. Eggeler: Surf. Coat. Technol., 2009, vol. 203, pp. 2064–72.10.1016/j.surfcoat.2009.02.008 ↗
4. A.V. Put, D. Monceau, and D. Oquab: Surf. Coat. Technol., 2007, vol. 202, pp. 665–69.10.1016/j.surfcoat.2007.06.017 ↗
5. M.J. Stiger, N.M. Yanar, R.W. Jackson, S.J. Laney, F.S. Pettit, G.H. Meier, A.S. Gandhi, and C.G. Levi: Metall. Mater. Trans. A, 2009, vol. 38A, pp. 848–57.
6. L. Besra and M. Liu: Prog. Mater. Sci., 2007, vol. 52, pp. 1–61.10.1016/j.pmatsci.2006.07.001 ↗
7. S.T. Aruna and K.S. Rajam: Mater. Chem. Phys., 2008, vol. 111, pp. 131–36.10.1016/j.matchemphys.2008.03.035 ↗
8. X.J. Lu and P. Xiao: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 2613–21.10.1016/j.jeurceramsoc.2006.09.016 ↗
9. S.S. Panda, V. Singh, A. Upadhyaya, and D. Agrawal: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2253–64.10.1007/BF02586144 ↗
10. S.G. Huang, L. Li, O.V.D. Biest, and J. Vleugels: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 689–93.10.1016/j.jeurceramsoc.2006.04.040 ↗
11. D.H. Kim and C.H. Kim: J. Am. Ceram. Soc., 1992, vol. 75, pp. 716–18.10.1111/j.1151-2916.1992.tb07865.x ↗