journal article·2015-01

Effect of Anodized Oxide Layer Aging on Wettability of Alkyl Silane Coating Developed on Aerospace Aluminum Alloy

G. Yoganandan, T. Bharathidasan, M. Soumya Sri, D. Vasumathy, J. N. Balaraju, Bharathibai J. Basu

Publisher page

Abstract

Incipient nanoporous texture was developed by phosphoric acid anodization (PAAO) process on AA2024 specimen. The developed oxide layer was modified with low surface energy material fluoroalkyl-silane (FAS-13) by simple immersion technique to improve the hydrophobic property of the surface. Atomic force microscopy results showed that there was a significant reduction (30 pct) in surface roughness due to the aging of PAAO. The water contact angle measurement revealed that there was a gradual increase in WCA from 130 to 160 deg due to the aging of PAAO. A systematic composition analysis was carried out to understand the interfacial chemical reaction and also to differentiate the coating formation mechanism between the natural and artificial aging processes. The potentiodynamic polarization results revealed that the superhydrophobic (SH) surface exhibited about 15 and 4 times improved corrosion resistance compared to bare specimen and PAAO, respectively. Electrochemical impedance spectroscopy results also showed the improved corrosion inhibition behavior of vacuum heat-treated and FAS-modified SH surface among the developed coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S. Farhadi and M. Farzaneh: International Journal of Theoretical and Applied Nanotechnology., 2012, vol. 1, pp. 38-45.
2. L. Paussa, F. Andreatta, N. C. R. Navarro, A. Duran and L. Fedrizzi: Electrochim. Acta., 2012, vol. 70, pp. 25–33.10.1016/j.electacta.2012.02.099 ↗
3. P.G. Sheasby and R. Pinner: The surface treatment and finishing of Aluminum and its alloys. sixth ed. (Finishing publications ltd, UK, 2001), pp. 1-596.
4. M. Murphy: Met. Finish., 1998, vol. 96, pp. 10–30.10.1016/S0026-0576(97)82783-3 ↗
5. R. L.Twite and G. P. Bierwagen: Prog. Org. Coat., 1998, vol. 33, pp. 91-100.10.1016/S0300-9440(98)00015-0 ↗
6. S. Chen, C. Kang, J. Wang, C. Liu and K.Sun: Appl.Surf.Sci., 2010, vol. 256, pp. 6518-6525.10.1016/j.apsusc.2010.04.040 ↗
7. J. Escobar, L. Arurault and V. Turq: Appl.Surf.Sci., 2012, vol. 258, pp. 8199-8208.10.1016/j.apsusc.2012.05.022 ↗
8. J. Lee, Y. Kim, U. Jung and W. Chung: Mater. Chem. Phys., 2013, vol. 141, pp. 680-685.10.1016/j.matchemphys.2013.05.058 ↗
9. W. Lee: JOM., 2010, vol. 62, pp. 57-63.10.1007/s11837-010-0088-5 ↗
10. J. J. Suay, E. Gimenez, T. Rodriguez, K. Habbib and J. J. Saura: Corros. Sci., 2003, vol. 45, pp. 611-624.10.1016/S0010-938X(02)00137-3 ↗
11. Y. Zhang, J. Wu, X. Yu and H. Wu: Appl.Surf.Sci., 2011, vol. 257, pp. 7928-7931.10.1016/j.apsusc.2011.03.096 ↗
12. Q. Wang, B. Zhang, M. Qu, J. Zhang and D. He: Appl.Surf.Sci., 2008, vol. 254, pp. 2009–2012.10.1016/j.apsusc.2007.08.039 ↗
13. X. Y. Fu and X. H. He: Appl.Surf.Sci., 2008, vol. 255, pp. 1776-1781.10.1016/j.apsusc.2008.06.018 ↗
14. B. Qian and Z. Shen: Langmuir., 2005, vol. 21, pp. 9007-9009.10.1021/la051308c ↗
15. H. Wang, D. Dai and X. Wu: Appl.Surf.Sci., 2008, vol. 254, pp. 5599-5601.10.1016/j.apsusc.2008.03.004 ↗
16. B. Yin, L. Fang, A. Q. Tang, J. Hu, J. H. Mao, Q. L. Huang and G. Bai: Surf.Interface Anal., 2012, vol. 44, pp. 584–589.10.1002/sia.3875 ↗
17. W. Lee, B. G. Park and K. B. Lee: Bull.Korean Chem. Soc., 2010, vol. 31, pp. 1833-1834.10.5012/bkcs.2010.31.7.1833 ↗
18. W. Lee, B. G. Park, D. H. Kim, D. J. Ahn, Y. Park, S. H. Lee and K. B. Lee: Langmuir., 2010, vol. 26, pp. 1412–1415.10.1021/la904095x ↗
19. J. N. Mateo, S. S. Kulkarni, L. Das, S. Bandyopadhyay, G. C. Tepper and K. J. Wynne: Nanotechnology., 2011, vol. 22, pp. 1-10.10.1088/0957-4484/22/3/035703 ↗
20. X. Zhang, F. Shi, J. Niu, Y. Jiang and Z. Wang: J. Mater. Chem., 2008, vol. 18, pp. 621-633.10.1039/b711226b ↗
21. P. Roach, N. J. Shirtcliffe and M. I. Newton: Soft Matter., 2008, vol. 4, pp. 224-240.10.1039/b712575p ↗
22. X. Li, D. Reinhoudt and M. Rego: Chem.Soc.Rev., 2007, vol. 36, pp. 1350-1368.10.1039/b602486f ↗
23. M. Ma and R. M. Hill: Curr.Opin.Colloid Interface Sci., 2006, vol. 11, pp. 193-202.10.1016/j.cocis.2006.06.002 ↗
24. A. Rauter, M. Koelj, L.S. Perse, A.S. Vuk, B. Orel, B. Bengu, and O. Sunetci: Mater. Technol., 2013, vol. 47, pp. 205–210.
25. W. Barthlott and C. Neinhuis: Planta, 1997, vol. 202, pp. 1–8.10.1007/s004250050096 ↗
26. N. Saleema, D. K. Sarkar, R. W. Paynter and X. G. Chen: Appl.Mater.Interfaces., 2010, vol. 2, pp. 2500–2502.10.1021/am100563u ↗
27. Z. Guo, F. Zhou, J. Hao and W. J. Liu: Colloid Interface. Sci., 2006, vol. 303, pp. 298–305.10.1016/j.jcis.2006.06.067 ↗
28. S. Wang, L. Feng and L. Jiang: Adv.Mater., 2006, vol. 18, pp. 767–770.10.1002/adma.200501794 ↗
29. H. Liu, S. Szunerits, M. Pisarek, W. Xu and R. Boukherroub: Appl.Mater.Interfaces., 2009, vol. 1, pp. 2086–2091.10.1021/am900488w ↗
30. M. Qu, B. Zhang, S. Song, L. Chen, J. Zhang and X. Cao: Adv.Funct.Mater., 2007, vol. 17, pp. 593-596.10.1002/adfm.200600472 ↗
31. S. Desbief, B. Grignard, C. Detrembleur, R. Rioboo, A. Vaillant, D. Seveno, M. Voue, J. D. Coninck, A. M. Jonas, C. Jerome, P. Damman and R. Lazzaroni: Langmuir., 2010, vol. 26, pp. 2057-2067.10.1021/la902565y ↗
32. C.R. Crick, I.P. Parkin, and R. Colin: Chem. A Eur. J., 2010, vol. 16, pp. 3568–88.10.1002/chem.200903335 ↗
33. H. Liu, S. Szunerits, W. Xu and R. Boukherroub: Appl.Mater.Interfaces., 2009, vol. 1, pp. 1150–1153.10.1021/am900100q ↗
34. T. Ishizaki, Y. Masuda and M. Sakamoto: Langmuir., 2011, vol. 27, pp. 4780–4788.10.1021/la2002783 ↗
35. W. Xu, J. Song, J. Sun, Y. Lu, and Z. Yu: Appl. Mater. Interfaces, 2011, vol. 3, pp. 4404–14.10.1021/am2010527 ↗
36. H. Z. Wang, Z. P. Huang, Q. J. Cai, K. Kulkarni, C. L. Chen, D. Carnahan and Z. F. Ren: Carbon., 2010, vol. 48, pp. 868 –875.10.1016/j.carbon.2009.10.041 ↗
37. V. Lopez, E. Otero, A. Bautista, E. Escudero, and J.A. Gonzalez: Rev. Met. Madr., 2003, vol. Extr, pp. 104–09.10.3989/revmetalm.2003.v39.iExtra.1105 ↗
38. J. A. Gonzalez, S. Feliu, J. A. Bautista and E. Otero: J.Appl.Electrochem., 1999, vol. 29, pp. 845-854.
39. Trompette, L. Arurault, S. Fontorbes and L. Massot: Electrochim. Acta., 2010, vol. 55, pp. 2901-2910.10.1016/j.electacta.2009.12.063 ↗
40. C. C. Landry, N. Pappe, M. R. Mason, A. W. Apblett, A. N. Tyler, A. N. Maclnnes and A. R. Barron: J.Mater.Chem., 1995, vol. 5, pp. 331-341.10.1039/jm9950500331 ↗
41. G. P. Shulman and A. J. Bauman: Met.Finish., 1995, vol. 93, pp. 16-19.10.1016/0026-0576(95)91305-7 ↗
42. G. Boisier, A. Lamure, N. Pebere, N. Portail and M. Villatte: Surf.Coat.Technol., 2009, vol. 203, pp. 3420–3426.10.1016/j.surfcoat.2009.05.008 ↗
43. N. Saleema, D.K. Sarkar, D. Gallant, R.W. Paynter, and X.G. Chen: Appl. Mater. Interfaces, 2011, vol. 3, pp. 4775–81.10.1021/am201277x ↗
44. R. N. Wenzel: Ind. Eng. Chem., 1936, vol. 28, pp. 988–994.10.1021/ie50320a024 ↗
45. A. B. D. Cassie and S. Baxter: Trans.Faraday.Soc., 1944, vol. 40, pp. 546 - 551.10.1039/tf9444000546 ↗
46. B. Matthes, E. Broszeit, J. Aromaa, H. Ronkainen, S. P. Hannula, A. Leyland and A. Matthews: Surf.Coat.Technol., 1991, vol. 49, pp. 489-495.10.1016/0257-8972(91)90105-6 ↗
47. I. A. Kartsonakis, A. C. Balaskas and G. C. Kordas: Corros. Sci., 2011, vol. 53, pp. 3771-3779.10.1016/j.corsci.2011.07.026 ↗