Cyclic deformation of superduplex stainless steels at intermediate temperatures
Source abstract
Abstract
Cyclic deformation of a superduplex stainless steel at temperatures ranging from room temperature to 475 °C was evaluated for two different strain amplitudes. Cyclic hardening-softening response and the corresponding substructural features within each constituent phase of the alloy were characterized. Experimental evidence, such as abnormal cyclic hardening, inverse strain rate sensitivity (SRS), and serrated flow, reveals the existence of dynamic strain aging (DSA) in the studied temperature range. Substructural evolution suggests that DSA induces changes in the distribution of plastic strain between austenite and ferrite. In the case of tests performed at 475°C, there exists a significant influence of thermal embrittlement too.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. P. Elliott, Mater. Performance, 1989, vol. 28 (4), pp. 57–66.
2. K. Tsuzaki, T. Hori, T. Maki, and I. Tamura: Mater. Sci. Eng., 1983, vol. 61, pp. 247–60.10.1016/0025-5416(83)90107-6 ↗
3. S.N. Ghafouri, R.G. Faulkner, and T.E. Chung: Mater. Sci. Technol., 1986, vol. 2, pp. 1223–32.10.1179/mst.1986.2.12.1223 ↗
4. A.F. Armas, O.R. Bettin, I. Alvarez-Armas, and G.H. Rubiolo, J. Nucl. Mater., 1988, vol. 155, pp. 644–49.10.1016/0022-3115(88)90388-1 ↗
5. R. Zauter, H.-J. Christ, and H. Mughrabi: Metall. Mater. Trans. A, 1994, vol. 25, pp. 401–06.10.1007/BF02647985 ↗
6. V.S. Srinivasan, R. Sandhya, M. Valsan, K. Bhanu Sankam Rao, S.L. Mannan, and D.H. Sastry: Scripta Mater., 1997, vol. 37 (10), pp. 1593–98.10.1016/S1359-6462(97)00282-0 ↗
7. H. Mughrabi and H.J. Christ: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 1154–69.10.2355/isijinternational.37.1154 ↗
8. R. Sandhya, K. Bhanu Sankam Rao, S.L. Mannan, and R. Devanathan: Scripta Mater., 1999, vol. 41 (9), pp. 921–27.10.1016/S1359-6462(99)00238-9 ↗
9. D.W. Kim, W.G. Kim, and W.S. Ryu, Int. J. Fatigue, 2003, vol. 25, pp. 1203–07.10.1016/S0142-1123(03)00120-8 ↗
10. K. Johansson: Proc. World Duplex 2000 Conf., Associazione Italiana di Metallurgia, Milano, 2000, pp. 13–28.
11. H.M. Chung and T.R. Leax: Mater. Sci. Technol., 1990, vol. 6, pp. 249–55.10.1179/mst.1990.6.3.249 ↗
12. L. Llanes, A. Mateo, L. Iturgoyen, and M. Anglada: Acta Mater., 1996, vol. 45, pp. 5145–51.
13. T.J. Marrow: Fatigue Fract. Eng. Mater. Struct., 1996, vol. 19 (7), pp. 919–33.10.1111/j.1460-2695.1996.tb01027.x ↗
14. L. Iturgoyen and M. Anglada: Fatigue Fract. Eng. Mater. Struct., 1997, vol. 20 (5), pp. 645–57.10.1111/j.1460-2695.1997.tb00298.x ↗
15. S. Hereñú, I. Alvarez-Armas, and A.F. Armas: Scripta Mater., 2001, vol. 45, pp. 739–45.10.1016/S1359-6462(01)01088-0 ↗
16. I. Alvarez-Armas, A.F. Armas, S. Hereñú, S. Degallaix, and G. Degallaix: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 1–9.10.1046/j.1460-2695.2002.00501.x ↗
17. A. Gironès, L. Llanes, M. Anglada, and A. Mateo: High Temp. Mater. Process, 2005, vol. 24 (2), pp. 125–30.10.1515/HTMP.2005.24.2.125 ↗
18. K.G. Samuel, S.L. Mannan, and P. Rodríguez, Acta Metall., 1988, vol. 36 (8), pp. 2323–27.10.1016/0001-6160(88)90331-8 ↗
19. L.H. de Almeida, I. Le May, and P.R.O. Emygdio: Mater. Characterization, 1998, vol. 41, pp. 137–50.10.1016/S1044-5803(98)00031-X ↗
20. S.C. Tjong and S.M. Zhu: Metall. Mater. Trans. A, 1997, vol. 28, pp. 1347–55.10.1007/s11661-997-0271-7 ↗
21. C. Gupta, I.K. Chakravartty, S.L. Wadekar, and J.S. Dubey: Mater. Sci. Eng. A, 2000, vol. 292, pp. 49–55.10.1016/S0921-5093(00)00992-8 ↗
22. A. Gironès, L. Llanes, M. Anglada, and A. Mateo: Mater. Sci. Eng., A. 2004, vol. 367, pp. 322–28.10.1016/j.msea.2003.10.293 ↗
23. P. Rodríguez: Bull. Mater. Sci., 1984, vol. 6 (4), pp. 653–63.10.1007/BF02743993 ↗
24. J.M. Robinson and M.P. Shaw: Int. Mater. Rev., 1994, vol. 39 (3), pp. 113–22.10.1179/imr.1994.39.3.113 ↗
25. R. Zauter, H.-J. Christ, and H. Mughrabi: Metall. Mater. Trans. A, 1994, vol. 25, pp. 407–13.
26. K. Bhanu Sankara Rao, M.G. Castelli, and J.R. Ellis: Scripta Metall. Mater., 1995, vol. 33 (6), pp. 1005–12.10.1016/0956-716X(95)00320-U ↗
27. A. Mateo, A. Gironès, J. Keichel, L. Llanes, N. Akdut, and M. Anglada: Mater. Sci. Eng., A, 2001, vol. 314, pp. 176–85.10.1016/S0921-5093(00)01933-X ↗
28. T. Magnin and J.M. Lardon: Mater. Sci. Eng., A, 1988, vol. 104, pp. 21–28.10.1016/0025-5416(88)90402-8 ↗
29. S. Degallaix, A. Seddouki, G. Degallaix, T. Kruml, and J. Polak: Fatigue Fract. Eng. Mater. Struct., 1995, vol. 18 (1), pp. 65–77.10.1111/j.1460-2695.1995.tb00142.x ↗
30. O.B. Pedersen: Mater. Sci. Forum, 1999, vol. 318–20, pp. 733–42.10.4028/www.scientific.net/MSF.318-320.733 ↗
31. K. Massol, J.-B. Vogt, and J. Foct: Iron Steel Inst. Jpn. Int., 2002, vol. 42 (3), pp. 310–15.10.2355/isijinternational.42.310 ↗
32. H.J. Lee, C.S. Lee, and Y.W. Chang: Metall. Mater. Trans. A, 2005, vol. 36, pp. 967–76.10.1007/s11661-005-0290-1 ↗
33. A. Gironès, A. Mateo, L. Llanes, and M. Anglada: Rev. Metall. Madrid, 2001, vol. 37, pp. 150–54.10.3989/revmetalm.2001.v37.i2.456 ↗
34. K.S.B. Rose and S.G. Glover: Acta Metall., 1966, vol. 14, pp. 1505–16.10.1016/0001-6160(66)90172-6 ↗
35. P.G. McCormigk: Acta Metall., 1972, vol. 20 (3), pp. 351–54.10.1016/0001-6160(72)90028-4 ↗
36. J.P. Hirth: Physical Metallurgy, R.W. Cahn and P. Haasen, eds. Elsevier Science, Amsterdam, 1996, pp. 1831–33.
37. R. Fawley, M.A. Quader, and R.A. Dodd: Trans. AIME, 1968, vol. 242, pp. 771–76.
38. M. Grujicic, J.-O. Nilsson, W.S. Owen, and T. Thorvaldsson: Proc. High Nitrogen Steel Conf., J. Foct and A. Hendry, eds., Institute of Metals, London, 1989, pp. 151–58.
39. K.-H. Park, J.C. Lasalle, and L.H. Schwarz: Acta Metall., 1985, vol. 33, pp. 205–11.10.1016/0001-6160(85)90138-5 ↗
40. M. Anglada, J. Rodríguez, and A. Isalgué: Scripta Metall., 1989, vol. 23, pp. 1633–36.10.1016/0036-9748(89)90142-7 ↗
41. A. Gironès: Ph.D. Thesis, Universitat Politèenica de Catalunya, Bareelona, 2003.
42. M. Klesnil and P. Lukas: Fatigue of Metallic Materials, Elsevier Science, New York, NY, 1980, pp. 12–47.