Effect of Plastic Deformation in Various Temperature-Rate Conditions on Structure and Mechanical Properties of Biodegradable Fe–30Mn–5Si Alloy
Source abstract
Abstract
Rheological models of deformation behavior and structure formation of biodegradable Fe–30Mn–5Si shape memory alloy (wt pct) under various upsetting conditions from 250 °C to 900 °C with strain rates of 0.1, 1, and 10 s−1 are studied. The relationship between the structure formation and the shape of compression stress–strain diagrams has been established. The main parameters of compression stress–strain diagrams, such as maximum stress (σmax), apparent yield stress (σ0,2), and maximum strain (emax) achieved at σmax are determined. The Vickers hardness was also measured. These parameters were found to be depending on the deformation temperature at a greater extent and, at a lesser extent, on the strain rate. According to optical and electron microscopy, the Fe–30Mn–5Si alloy exhibits high resistance to dynamic recrystallization process up to 900 °C. It has been shown by X-ray diffraction that the Fe–30Mn–5Si alloy is in a single-phase state (γ-austenite) in the temperature range from 250 °C to 700 °C. An increase in the deformation temperature leads to the appearance of a ε-martensite phase at room temperature. Based on the obtained results, favorable modes of subsequent thermomechanical treatment have been developed. These modes make it possible to obtain semi-products with high functional properties from the Fe–30Mn–Si alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. H. Lia, Y. Zheng, and L. Qin: Prog. Nat. Sci. Mater. Int., 2014, vol. 24, pp. 414–22. https://doi.org/10.1016/j.pnsc.2014.08.014.10.1016/j.pnsc.2014.08.014 ↗
2. Y. Zheng, X. Gu, and F. Witte: Mater. Sci. Eng. R, 2014, vol. 77, pp. 1–34. https://doi.org/10.1016/j.mser.2014.01.001.10.1016/j.mser.2014.01.001 ↗
3. H. Hermawan: Biodegradable Metals—From Concept to Applications, Springer, Berlin, 2012, p. 69. https://doi.org/10.1007/978-3-642-31170-3.10.1007/978-3-642-31170-3 ↗
4. B. Liu, Y. Zheng, and L. Ruan: Mater. Lett., 2011, vol. 65, pp. 540–43. https://doi.org/10.1016/j.matlet.2010.10.068.10.1016/j.matlet.2010.10.068 ↗
5. M. Moravej and D. Mantovani: Int. J. Mol. Sci., 2011, vol. 12, pp. 4250–70. https://doi.org/10.3390/ijms12074250.10.3390/ijms12074250 ↗
6. V.P. Muhammad Rabeeh and T. Hanas: Prog. Biomater.Biomater., 2022, vol. 11, pp. 163–91. https://doi.org/10.1007/s40204-022-00189-4.10.1007/s40204-022-00189-4 ↗
7. H. Hermawan, D. Dube, and D. Mantovani: Acta Biomater., 2010, vol. 6, pp. 1693–97. https://doi.org/10.1016/j.actbio.2009.10.006.10.1016/j.actbio.2009.10.006 ↗
8. M. Schinhammer, A.C. Hänzi, J.F. Löffler, and P.J. Uggowitzer: Acta Biomater., 2010, vol. 6, pp. 1705–13. https://doi.org/10.1016/j.actbio.2009.07.039.10.1016/j.actbio.2009.07.039 ↗
9. A. Francis, Y. Yang, S. Virtanen, and A.R. Boccaccini: J. Mater. Sci. Mater. Med., 2015, vol. 26, pp. 138–53. https://doi.org/10.1007/s10856-015-5473-8.10.1007/s10856-015-5473-8 ↗
10. R. Drevet, Y. Zhukova, P. Malikova, S. Dubinskiy, A. Korotitskiy, Y. Pustov, and S. Prokoshkin: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1006–13. https://doi.org/10.1007/s11661-017-4458-2.10.1007/s11661-017-4458-2 ↗
11. S. Prokoshkin, Y. Pustov, Y. Zhukova, P. Kadirov, S. Dubinskiy, V. Sheremetyev, and M. Karavaeva: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 2024–32. https://doi.org/10.1007/s11661-021-06217-5.10.1007/s11661-021-06217-5 ↗
12. S. Prokoshkin, Y. Pustov, Y. Zhukova, P. Kadirov, M. Karavaeva, A. Prosviryakov, and S. Dubinskiy: Materials, 2021, vol. 14, p. 3327. https://doi.org/10.3390/ma14123327.10.3390/ma14123327 ↗
13. J. Hufenbach, H. Wendrock, F. Kochta, U. Kühn, and A. Gebert: Mater. Lett., 2017, vol. 186, pp. 330–33. https://doi.org/10.1016/j.matlet.2016.10.037.10.1016/j.matlet.2016.10.037 ↗
14. F. Matassi, A. Botti, L. Sirleo, C. Carulli, and M. Innocenti: Clin. Cases Miner. Bone Metab., 2013, vol. 10, pp. 111–15.
15. T. Kraus, F. Moszner, S. Fischerauer, M. Fiedler, E. Martinelli, J. Eichler, F. Witte, E. Willbold, M. Schinhammer, M. Meischel, P.J. Uggowitzer, J.F. Loffler, and A. Weinberg: Acta Biomater., 2014, vol. 10, pp. 3346–53. https://doi.org/10.1016/j.actbio.2014.04.007.10.1016/j.actbio.2014.04.007 ↗
16. J.F. Wan, S.P. Chen, T.Y. Hsu, and Y.N. Huang: J. Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 887–90. https://doi.org/10.1016/j.msea.2006.02.152.10.1016/j.msea.2006.02.152 ↗
17. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89. https://doi.org/10.1016/S0079-6425(99)00007-9.10.1016/S0079-6425(99)00007-9 ↗
18. C. Koch, I. Ovidko, S. Seal, and S. Veprek: Structural Nanocrystalline Materials: Fundamentals and Applications, Cambridge University Press, Cambridge, 2007, p. 380.10.1017/CBO9780511618840 ↗
19. V. Sheremetyev, A. Kudryashova, V. Cheverikin, A. Korotitskiy, S. Galkin, S. Prokoshkin, and V. Brailovski: J. Alloys Compd., 2019, vol. 800, pp. 320–26. https://doi.org/10.1016/j.jallcom.2019.06.041.10.1016/j.jallcom.2019.06.041 ↗
20. V. Sheremetyev, K. Lukashevich, A. Kreitcberg, A. Kudryashova, M. Tsaturyants, S. Galkin, V. Andreev, S. Prokoshkin, and V. Brailovski: J. Alloys Compd., 2022, vol. 928, p. 167143. https://doi.org/10.1016/j.jallcom.2022.167143.21.10.1016/j.jallcom.2022.167143.21 ↗
21. G.I. Raab, R.Z. Valiev, D.V. Gunderov, T.C. Lowe, A. Misra, and Y.T. Zhu: Mater. Sci. Forum, 2008, https://doi.org/10.4028/www.scientific.net/MSF.584-586.80.10.4028/www.scientific.net/MSF.584-586.80 ↗
22. D.V. Gunderov, A.V. Polyakov, I.P. Semenova, G.I. Raab, A.A. Churakova, E.I. Gimaltdinova, I. Sabirov, J. Segurado, V.D. Sitdikov, I.V. Alexandrov, N.A. Enikeev, and R.Z. Valiev: J. Mater. Sci. Eng. A, 2013, vol. 562, pp. 128–36. https://doi.org/10.1016/j.msea.2012.11.007.10.1016/j.msea.2012.11.007 ↗
23. A.B. Naizabekov, S.N. Lezhnev, A.S. Arbuz, and E.A. Panin: Mater. Sci. Eng., 2019, vol. 461, p. 012065. https://doi.org/10.1088/1757-899X/461/1/012065.10.1088/1757-899X/461/1/012065 ↗
24. S. Dobatkin, S. Galkin, Y. Estrin, V. Serebryany, M. Diez, N. Martynenko, E. Lukyanova, and V. Perezhogin: J. Alloys Compd., 2019, vol. 774, pp. 969–79. https://doi.org/10.1016/j.jallcom.2018.09.065.10.1016/j.jallcom.2018.09.065 ↗
25. A. Stefanik, P. Szota, S. Mroz, T. Bajor, and H. Dyja: Arch. Metall. Mater., 2015, vol. 60, pp. 3001–05. https://doi.org/10.1515/amm-2015-0479.10.1515/amm-2015-0479 ↗
26. A. Gryc, T. Bajor, and H. Dyja: Metalurgija, 2016, vol. 55, pp. 772–74.
27. V.N. Serebryanyy, S.V. Dobatkin, Y.Z. Estrin, S.P. Galkin, V.Y. Perezhogin, and M. Diez: Light Alloy Technol., 2015, vol. 2, pp. 112–18. (in Russian).
28. A. Stefanik, A. Morel, S. Mroz, and P. Szota: Arch. Metall. Mater., 2015, vol. 60, pp. 809–13. https://doi.org/10.1515/amm-2015-0211.10.1515/amm-2015-0211 ↗
29. T. Akopyan, A. Aleshchenko, N. Belov, and S. Galkin: Phys. Met. Metallogr., 2018, vol. 119, pp. 241–50. https://doi.org/10.1134/S0031918X18010039.10.1134/S0031918X18010039 ↗
30. B.V. Karpov, P.V. Patrin, S.P. Galkin, E.A. Kharitonov, and I.B. Karpov: Metallurgist, 2018, vol. 61, pp. 884–90. https://doi.org/10.1007/s11015-018-0581-6.10.1007/s11015-018-0581-6 ↗
31. D.A. Negodin, S.P. Galkin, E.A. Kharitonov, B.V. Karpov, D.N. Kharkovsky, I.A. Dubovitskaya, and P.V. Patrin: Metallurgist, 2018, vol. 11, pp. 40–46. (in Russian).
32. N.V. Lopatin: Int. J. Mater. Form., 2013, vol. 6, pp. 459–65. https://doi.org/10.1007/s12289-012-1099-2.10.1007/s12289-012-1099-2 ↗
33. S.P. Galkin: Theory and Technology of Stationary Helical Rolling of Billets and Bars of Low-Plasticity Steels and Alloys. Dissertation Abstract for the Degree of Doctor of Technical Sciences, Moscow, 1998.
34. V. Sheremetyev, A. Kudryashova, T. Dinh, S. Galkin, S. Prokoshkin, and V. Brailovski: Metallurgist, 2019, vol. 63, pp. 51–61. https://doi.org/10.1007/s11015-019-00793-z.10.1007/s11015-019-00793-z ↗
35. O.V. Rybalchenko, NYu. Anisimova, M.V. Kiselevsky, G.V. Rybalchenko, N.S. Martynenko, NYu. Tabachkova, N.R. Bochvar, I.V. Shchetinin, A.A. Tokar, A.G. Raab, and S.V. Dobatkin: J. Phys. Conf. Ser., 2020, https://doi.org/10.1088/1742-6596/1688/1/012009.10.1088/1742-6596/1688/1/012009 ↗
36. V.A. Sheremet’ev, O.B. Akhmadkulov, V.S. Komarov, A.V. Korotitskii, K.E. Lukashevich, S.P. Galkin, V.A. Andreev, and S.D. Prokoshkin: Met. Sci. Heat Treat.Heat Treat., 2021, vol. 63, pp. 403–13. https://doi.org/10.1007/s11041-021-00703-8.10.1007/s11041-021-00703-8 ↗
37. M.L. Bernshtein, S.V. Dobatkin, L.M. Kaputkina, and S.D. Prokoshkin: Hot Deformation Diagrams Structure and Properties of Steels, Metallurgiya, Moscow, 1989, p. 544. (in Russian).
38. P. Wan, T. Kang, F. Li, P. Gao, L. Zhang, and Z. Zhao: J. Mater. Res. Technol., 2021, vol. 15, pp. 1059–68. https://doi.org/10.1016/j.jmrt.2021.08.079.10.1016/j.jmrt.2021.08.079 ↗
39. O.A. Zambrano and R.E. Logé: Mater Charact, 2019, vol. 152, pp. 151–61. https://doi.org/10.1016/j.matchar.2019.04.016.10.1016/j.matchar.2019.04.016 ↗
40. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: J. Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74. https://doi.org/10.1016/S0921-5093(97)00424-3.10.1016/S0921-5093(97)00424-3 ↗
41. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed. Elsevier Ltd, London, 2004, pp. 415–51.10.1016/B978-008044164-1/50017-7 ↗
42. J.J. Urcola and C.M. Sellars: Acta Metall., 1987, vol. 35, pp. 2649–57. https://doi.org/10.1016/0001-6160(87)90264-1.10.1016/0001-6160(87)90264-1 ↗
43. B.C. Zolotarevskii: Mechanical Properties of Metals, MISiS, Moscow, 1998, p. 400. (in Russian).
44. S.S. Gorelik, S.V. Dobatkin, and L.M. Kaputkina: Recrystallization of Metals and Alloys, MISiS, Moscow, 2005, p. 431.
45. V. Brailovski, S. Prokoshkin, P. Terriault, and F. Trochu: Shape Memory Alloys: Fundamentals, Modelling and Applications, ETS Publications, Montreal, 2003, p. 729.
46. N. Stanford and D. Dunne: Mater. Sci. Eng. ASci. Eng. A, 2006, vol. 422, pp. 352–59. https://doi.org/10.1016/j.msea.2006.02.009.10.1016/j.msea.2006.02.009 ↗
47. A. Baruj and H. Troiani: Mater. Sci. Eng. A, 2008, vol. 481, pp. 574–77. https://doi.org/10.1016/j.msea.2007.02.140.10.1016/j.msea.2007.02.140 ↗
48. A.V. Druker, A. Baruj, and J. Malarría: Mater Charact, 2010, vol. 61, pp. 603–12. https://doi.org/10.1016/j.matchar.2010.03.005.10.1016/j.matchar.2010.03.005 ↗
49. B. Maji, M. Krishnan, V. Hiwarkar, I. Samajdar, and R.K. Ray: J. Mater. Eng. Perform., 2009, vol. 18, pp. 588–93. https://doi.org/10.1007/s11665-009-9428-4.10.1007/s11665-009-9428-4 ↗
50. A.V. Druker, A. Perotti, A. Baruj, and J. Malarría: J. ASTM Int., 2011, vol. 8, pp. 1–8.10.1520/JAI103399 ↗
51. A. Nouri, A.R. Shirvan, Y. Li, and C. Wen: Smart Mater. Manuf., 2023, vol. 1, p. 100005.
52. N. Babacan, F. Kochta, V. Hoffmann, T. Gemming, U. Kühn, L. Giebeler, A. Gebert, and J. Hufenbach: Mater. Today Commun., 2021, vol. 28, p. 102689. https://doi.org/10.1016/j.mtcomm.2021.102689.10.1016/j.mtcomm.2021.102689 ↗
53. Y. Zuo, L. Sun, L. Yong, H. Peng, B. Yuan, Y. Nie, and Y. Wen: Mater Charact, 2022, vol. 193, p. 112272.10.1016/j.matchar.2022.112272 ↗