Kinetics of Transformation, Border of Metastable Miscibility Gap in Fe–Cr Alloy and Limit of Cr Solubility in Iron at 858 K
Source abstract
Abstract
Abstract The study was aimed at determination of the position of the Fe-rich border of the metastable miscibility gap (MMG) and of the solubility limit of Cr in iron at 858 K. Towards this end, a Fe73.7Cr26.3 alloy was isothermally annealed at 858 K in vacuum up to 8144 hours and Mössbauer spectra were recorded at room temperature after every step of the annealing. Three spectral parameters viz. the average hyperfine field, 〈B〉, the average isomer shift, 〈IS〉, and the probability of the atomic configuration with no Cr atoms in the two-shell vicinity of the probe Fe atoms, P(0,0), gave evidence that the transformation process took place in two stages. All three parameters could have been well described in terms of the Johnson–Mehl–Avrami–Kolmogorov equation, yielding kinetics parameters. The first stage, associated with the phase decomposition, proceeded much faster than the second stage, associated with the alpha-to-sigma phase transformation. The most reliable estimation of the position of the MMG and that of the value of the Cr solubility limit was obtained from the annealing time dependence of 〈B〉, namely 24.5 at. pct Cr for the former and 20.3 at. pct Cr for the latter. A comparison of these figures with the recent phase diagrams pertinent to Fe–Cr system was done.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. J.-O. Anderson and B. Sundman: Calphad, 1987, vol. 11, pp. 83–92.10.1016/0364-5916(87)90021-6 ↗
2. X. Xu, J.E. Westraadt, J. Odqvist, T.G.A. Youngs, S.M. King, and P. Hedström: Acta Mater., 2018, vol. 145, pp. 347–58.10.1016/j.actamat.2017.12.008 ↗
3. G. Bonny, D. Terentyev, and L. Malerba: Scr. Mater., 2008, vol. 59, p. 1193.10.1016/j.scriptamat.2008.08.008 ↗
4. G. Bonny, D. Terentyev, and L. Malerba: J. Phase Equilibria Diffus., 2010, vol. 31, pp. 439–44.10.1007/s11669-010-9782-9 ↗
5. W. Xiong, M. Selleby, Q. Chen, J. Odqvist, and Y. Du: Crit. Rev. Sol. Stat. Mater. Sci., 2010, vol. 35, pp. 125–52.10.1080/10408431003788472 ↗
6. W. Xiong, P. Hedström, M. Selleby, J. Odqvist, M. Thuvander, and Q. Chen: Calphad, 2011, vol. 35, pp. 355–66.10.1016/j.calphad.2011.05.002 ↗
7. M. Levesque, E. Martinez, C.-C. Fu, M. Nastar, and F. Soisson: Phys. Rev. B, 2011, vol. 84, p. 184205.10.1103/PhysRevB.84.184205 ↗
8. A.V. Ruban and V.I. Razumovskiy: Phys. Rev. B, 2012, vol. 86, p. 174111.10.1103/PhysRevB.86.174111 ↗
9. O. Senninger, E. Martinez, F. Soisson, M. Nastar, and Y. Bréchet: Acta Mater., 2014, vol. 73, pp. 97–106.10.1016/j.actamat.2014.03.019 ↗
10. A. Jacob, E. Povoden-Karadeniz, and E. Kozeschnik: Calphad, 2018, vol. 60, pp. 16–28.10.1016/j.calphad.2017.10.002 ↗
11. S.M. Dubiel and G. Inden: Z. Metallkde., 1987, vol. 78, pp. 544–49.
12. S.M. Dubiel and J. Żukrowski: Mater. Chem. Phys., 2013, vol. 141, pp. 18–21.10.1016/j.matchemphys.2013.05.023 ↗
13. S.M. Dubiel and J. Żukrowski: Mater. Res. Express, 2019, vol. 6, p. 026568.10.1088/2053-1591/aaf18d ↗
14. S.M. Dubiel and J. Żukrowski: Mater. Charact., 2017, vol. 129, pp. 282–87.10.1016/j.matchar.2017.05.017 ↗
15. S.M. Dubiel and J. Żukrowski: Mater. Charact., 2019, vol. 158, p. 109937.10.1016/j.matchar.2019.109937 ↗
16. S.M. Dubiel and J. Żukrowski: J. Magn. Magn. Mater., 1981, vol. 23, pp. 214–28.10.1016/0304-8853(81)90137-2 ↗
17. H. Kuwano and Y. Hamaguchi: J. Nucl. Mater., 1988, vol. 155–157, pp. 1071–74.10.1016/0022-3115(88)90469-2 ↗
18. S.M. Dubiel, J. Żukrowski, and Y. Serruys: Metall. Mat. Trans. A, 2018, vol. 49A, pp. 3729–38.10.1007/s11661-018-4656-6 ↗
19. D. Košovsky, M. Miglierini, M. Pavŭk, K. Sedlačkova, T. Kmječ and J. Kopeček: Phys. Status Solidi B, 2022, 2100632.10.1002/pssb.202100632 ↗
20. M. Sobota, K. Idczak, R. Konieczny, and R. Idczak: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 3083–99.10.1007/s11661-022-06729-8 ↗
21. A.G. Guy: Phase Transformations in Introduction to Materials Science, McGraw-Hill Kogakusha Ltd., New York, 1972, pp. 297–361.
22. R. Blower and G. J. Cox: J. Iron Steel Inst., 1970, pp. 769–75.
23. C.-O.A. Olsson, M. Hättestrand, M. Magnusson, and D. Shind: ISIJ Int., 2021, vol. 61, pp. 881–87.10.2355/isijinternational.ISIJINT-2020-591 ↗
24. B. Bonny, A. Bakaev, and P. Olsson: J. Nucl. Mater., 2017, vol. 484, pp. 42–50.10.1016/j.jnucmat.2016.11.017 ↗
25. L.R. Walker, G.K. Wertheim, and V. Jaccarino: Phys. Rev. Lett., 1961, vol. 6, pp. 98–101.10.1103/PhysRevLett.6.98 ↗
26. S.M. Dubiel and J. Żukrowski: Philos. Mag. Lett., 2017, vol. 97, pp. 386–92.10.1080/09500839.2017.1378450 ↗
27. R. Frattini, G. Longworth, P. Matteazzi, G. Principi, and A. Tiziani: Scr. Metall., 1981, vol. 15, pp. 873–77.10.1016/0036-9748(81)90269-6 ↗
28. T.F. de Andrade, A.M. Kliauga, R.L. Plaut, and A.F. Padihlia: Mater. Charact., 2008, vol. 59, pp. 503–07.10.1016/j.matchar.2007.03.006 ↗