journal article·2023-05Open access

Planar-Biaxial Thermo-mechanical Fatigue Behavior of Nickel-Base Superalloy Inconel 718 Under Proportional Loading

Marco Böcker, Harish Ramesh Babu, Sebastian Henkel, Mario Raddatz, Uwe Gampe, Horst Biermann

Abstract

Abstract The planar-biaxial thermo-mechanical fatigue behavior of nickel-base superalloy Inconel 718 was studied for selected proportional loading conditions, in particular biaxial strain ratios of 1.0, 0.6, and − 1.0. The cyclic temperature loading with minimum and maximum temperatures of 400 °C and 630 °C and a duration of 250 seconds was either In-Phase or Out-of-Phase to the mechanical axes. Besides the multiaxial tests, uniaxial thermo-mechanical fatigue tests were conducted In-Phase and Out-of-Phase with the same temperature cycle and cycle duration. The performed thermo-mechanical fatigue tests were analyzed regarding the deformation and lifetime behavior and compared with high-temperature isothermal low-cycle fatigue tests from a previous work of the authors. On the side of the lifetime description, a strain- and a stress-based approach were presented. For the planar-biaxial tests, the crack initiation mechanism and crack paths were shown.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. N.E. Waldren, M.J. Percy, and P.B. Mellor: Proc. Inst. Mech. Eng., 1965, vol. 180, pp. 111–30.10.1243/PIME_PROC_1965_180_014_02 ↗
2. J. Sun and H. Yuan: Int. J. Fatigue, 2019, vol. 120, pp. 228–40.10.1016/j.ijfatigue.2018.11.018 ↗
3. J. Sun, H. Yuan, and M. Vormwald: Int. J. Fatigue, 2020, vol. 135, 105486.10.1016/j.ijfatigue.2020.105486 ↗
4. S. Zhang and M. Sakane: Int. J. Fatigue, 2007, vol. 29, pp. 2191–99.10.1016/j.ijfatigue.2006.12.012 ↗
5. S. Ackermann, D. Kulawinski, S. Henkel, and H. Biermann: Int. J. Fatigue, 2014, vol. 67, pp. 123–33.10.1016/j.ijfatigue.2014.02.007 ↗
6. S. Henkel, J. Fischer, L. Balogh, T. Ungar, and H. Biermann: J. Phys.: Conf. Series, IOP Publishing, p. 12042.
7. S. Ackermann, T. Lippmann, D. Kulawinski, S. Henkel, and H. Biermann: Frattura ed Integrità Strutturale, 2015, vol. 9.
8. D. Kulawinski, M. Hoffmann, T. Lippmann, G. Lamprecht, A. Weidner, S. Henkel, and H. Biermann: J. Mater. Res., 2017, vol. 32, pp. 4411–23.10.1557/jmr.2017.344 ↗
9. D. Kulawinski, S. Henkel, D. Holländer, M. Thiele, U. Gampe, and H. Biermann: Int. J. Fatigue, 2014, vol. 67, pp. 212–19.10.1016/j.ijfatigue.2014.02.005 ↗
10. D. Kulawinski, S. Henkel, H. Biermann, D. Holländer, M. Thiele, and U. Gampe: International Conference on Multiaxial Fatigue & Fracture (ICMFF10), 2013.
11. D. Kulawinski, M. Hoffmann, A. Weidner, T. Lippmann, G. Lamprecht, S. Henkel, and H. Biermann: Fatigue Fract. Eng. Mater. Struct., 2017, vol. 40, pp. 909–23.10.1111/ffe.12551 ↗
12. M. Böcker, H. R. Babu, S. Henkel, M. Raddatz, U. Gampe, and H. Biermann: Fatigue Fract. Eng. Mater. Struct., 2022.
13. A. Erbe, F. Conrad, K.M. Kraemer, C. Kontermann, M. Bianchini, D. Kulawinski, and M. Oechsner: Proc. Struct. Integr., 2022, vol. 38, pp. 192–201.
14. T. Itoh, M. Sakane, and M. Ohnami: J. Eng. Mater. Technol., 1994, vol. 116, pp. 90–98.10.1115/1.2904261 ↗
15. L. Cui, P. Wang, H. Hoche, A. Scholz, and C. Berger: Mater. Sci. Eng. A, 2013, vol. 560, pp. 767–80.10.1016/j.msea.2012.10.032 ↗
16. A. Samir, A. Simon, A. Scholz, and C. Berger: Int. J. Fatigue, 2006, pp. 643–51.10.1016/j.ijfatigue.2005.08.010 ↗
17. D. Kulawinski, A. Weidner, S. Henkel, and H. Biermann: Int. J. Fatigue, 2015, vol. 81, pp. 21–36.10.1016/j.ijfatigue.2015.07.020 ↗
18. T. Itoh, M. Sakane, T. Hata, and N. Hamada: Int. J. Fatigue, 2006, vol. 28, pp. 459–66.10.1016/j.ijfatigue.2005.08.007 ↗
19. D.J. White, B. Crossland, and J.L. Morrison: Trans. Natl. Res. Inst. Met., 1978, pp. 167–71.
20. O.H. Basquin, ed.: The exponential law of endurance tests, 1910.
21. L.F. Coffin: Appl. Mater. Res, 1962, 129ff.
22. L.F. Coffin and J.F. Tavernelli: Trans. MetalI. Soc. AIME, 1959, pp. 794–806.
23. L.F. Coffin: Trans. Am. Soc. Mech. Eng. N. Y., 1954, vol. 76, pp. 931–50.
24. W. Deng, J. Xu, Y. Hu, Z. Huang, and L. Jiang: Mater. Sci. Eng. A, 2019, vol. 742, pp. 813–19.10.1016/j.msea.2018.11.052 ↗
25. A. Nitta and K. Kuwabara: Elsevier Applied Science Publishers, High Temperature Creep-Fatigue, 1988, pp. 203–22.
26. N. Hamada, M. Sakane, and M. Ohnami: J. Soc. Mater. Sci. Jpn., 1985, vol. 34, pp. 214–20.10.2472/jsms.34.214 ↗
27. H. Ramesh Babu, M. Böcker, M. Raddatz, S. Henkel, H. Biermann, and U. Gampe: Proceedings of the ASME Turbo Expo 2021, Turbomachinery Technical Conference and Exposition, 2021.
28. Proceedings of the FVV Autumn Conference 2021, FVV Information Sessions Turbomachinery, 2021, pp. 445–78.
29. Lebensdauermethoden, multiaxial und anisotherm (LEBEMAN): FVV Final Report No. 1288, 2021.
30. J. Bannatine, J. Comer, and J. Handrock: Research supported by the University of Illinois. Englewood Cliffs, NJ, Prentice Hall, 1990, vol. 1990, p. 286.
31. J. Sun and H. Yuan: Int. J. Fatigue, 2019, vol. 119, pp. 89–101.10.1016/j.ijfatigue.2018.09.017 ↗
32. M. Schlesinger, T. Seifert, and J. Preussner: Int. J. Fatigue, 2017, vol. 99, pp. 242–49.10.1016/j.ijfatigue.2016.12.015 ↗
33. M. Marchionni, H. Klingelhöffer, H. J. Kühn, T. Ranucci, and K. Matzak: Key engineering materials, Trans Tech Publ, pp. 347–50.
34. S. Guth, S. Doll, and K.-H. Lang: Proc. Eng., 2014, vol. 74, pp. 269–72.10.1016/j.proeng.2014.06.260 ↗
35. E.E. Affeldt, J. Timm, and A. Bennett: Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling, Springer, Berlin, 1996, pp. 159–68.10.1007/978-94-015-8636-8_17 ↗
36. J. Bressers, J. Timm, S.J. Williams, A. Bennett, and E. Affeldt: ASTM Spec. Tech. Publ., 1996, vol. 1263, pp. 56–67.
37. K.S. Kim and R. H. Vanstone: Elevated temperature crack growth, 1992.
38. C.J. Pretty, M.T. Whitaker, and S.J. Williams: Materials (Basel, Switzerland), 2017, vol. 10, p. 34.10.3390/ma10010034 ↗
39. H. Sehitoglu: Thermo-mechanical fatigue life prediction methods, ASTM International, 1992.10.1520/STP24152S ↗
40. T.H. Sanders, R.E. Frishmuth, and G.T. Embley: Metall. Trans. A, 1981, vol. 12, pp. 1003–10.10.1007/BF02643481 ↗
41. A. Cruzado, S. Lucarini, J. LLorca, and J. Segurado: Int. J. Fatigue, 2018, vol. 107, pp. 40–48.10.1016/j.ijfatigue.2017.10.014 ↗
42. B. Buchholz, U. Gampe, and T. Beck: Turbo Expo: Power for Land, Sea, and Air, American Society of Mechanical Engineers, pp. 187–96.
43. R.J. Lancaster, M.T. Whittaker, and S.J. Williams: Mater. High Temp., 2013, vol. 30, pp. 2–12.10.3184/096034013X13630238172260 ↗
44. J. Jones, M. Whittaker, R. Lancaster, and S. Williams: MATEC Web of Conferences, EDP Sciences, p. 19001.
45. V. Gray, J.P. Jones, M.T. Whittaker, R.J. Lancaster, C.J. Pretty, and S.J. Williams: Int. J. Fatigue, 2022, vol. 156, 106631.10.1016/j.ijfatigue.2021.106631 ↗
46. G. Sines and G. Ohgi: J. Eng. Mater. Technol., 1981.
47. K. Smith: J. Mater., 1970, vol. 5, pp. 767–78.
48. T. Connolley, M.J. Starink, and P.A. Reed: Superalloys, 2000, vol. 2000, pp. 435–44.10.7449/2000/Superalloys_2000_435_444 ↗
49. J. Belan: Metalurgija, 2015, vol. 54, pp. 59–62.
50. P.R. Bhowal, D. Stolz, A. M. Wusatowska-Sarnek, and R. Montero: Superalloy 2008, The Minerals Metals & Materials Society (TMS), 2008.
51. D. Texier, J.-C. Stinville, M.P. Echlin, S. Pierret, P. Villechaise, T.M. Pollock, and J. Cormier: Acta Mater., 2019, vol. 165, pp. 241–58.10.1016/j.actamat.2018.11.051 ↗