journal article·2023-01

Surface Modification of Steel via In Situ Formed Tantalum Carbide Through TIG Arcing

Sachin Balbande, Nilesh Kumar Paraye, Sourav Das

Publisher page

Abstract

Surface modification of low-carbon steel has been carried out by in situ formation of tantalum carbide (TaC) using tungsten inert gas arcing (TIG) process. The modified surface, consisting of lath shape martensite phase with TaC precipitates, was characterized by various techniques. Theses precipitates were formed mainly at prior austenite grain boundaries. Combined effect of martensite phase with in situ grown TaC precipitate significantly increases the hardness and wear resistance of modified surface compared to base metal.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. R. Kumar, P.K. Ghosh, and S. Kumar: J. Mater. Process. Technol., 2017, vol. 240, pp. 420–31.10.1016/j.jmatprotec.2016.10.020 ↗
2. J. Dossett and G.E. Totten: ASM Handbook, 2013, vol. 4A, pp. 389–98.
3. N.K. Paraye, A. Karmakar, P.K. Ghosh, S. Das: Mater. Sci. Technol., 2022, pp. 1–15.
4. S. Kumar and P.K. Ghosh: Mater. Sci. Eng. A., 2020, vol. 773, 138734.10.1016/j.msea.2019.138734 ↗
5. P.K. Ghosh and R. Kumar: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 831–42.10.1007/s11661-014-2670-x ↗
6. N.K. Paraye, S.P. Neog, P.K. Ghosh, and S. Das: Surf. Coat. Technol., 2021, vol. 405, 126533.10.1016/j.surfcoat.2020.126533 ↗
7. N.K. Paraye, P.K. Ghosh, and S. Das: Mater. Lett., 2021, vol. 283, 128723.10.1016/j.matlet.2020.128723 ↗
8. N.K. Paraye, P.K. Ghosh, and S. Das: Surf. Coat. Technol., 2020, vol. 399, 126129.10.1016/j.surfcoat.2020.126129 ↗
9. S.C. Tjong and Z.Y. Ma: Mater. Sci. Eng. A., 2000, vol. 29, pp. 49–113.10.1016/S0927-796X(00)00024-3 ↗
10. L. Zhong, Y. Xu, M. Hojamberdiev, J. Wang, and J. Wang: Mater. Des., 2011, vol. 32, pp. 3790–95.10.1016/j.matdes.2011.03.031 ↗
11. L. Chen, T. Yu, P. Xu, and B. Zhang: Surf. Coat. Technol., 2021, vol. 412, 127027.10.1016/j.surfcoat.2021.127027 ↗
12. S.C. Gallo, N. Alam, and R. Donnell: Surf. Coat. Technol., 2013, vol. 214, pp. 63–68.10.1016/j.surfcoat.2012.11.003 ↗
13. H. Zhang, K. Chong, G. Xiao, Z. Sun, and W. Zhao: Surf. Coat. Technol., 2018, vol. 352, pp. 222–30.10.1016/j.surfcoat.2018.08.032 ↗
14. R.A. Morris, B. Wang, and L.E. Matson: Acta Mater., 2020, vol. 60, pp. 139–48.10.1016/j.actamat.2011.09.036 ↗
15. X. Zhang, G.E. Hilmas, and W.G. Fahrenholtz: Mater. Sci. Eng. A., 2009, vol. 501, pp. 37–43.10.1016/j.msea.2008.09.024 ↗
16. M. Chao, W. Wang, E. Liang, and D. Ouyang: Surf. Coat. Technol., 2008, vol. 202, pp. 1918–22.10.1016/j.surfcoat.2007.08.021 ↗
17. C.L. Yeh and Y.S. Chen: Ceram. Int., 2017, vol. 43, pp. 15659–65.10.1016/j.ceramint.2017.08.124 ↗
18. H.A. Halfa and A.M. Reda: Int. J. Adv. Res., 2014, vol. 2, pp. 59–75.
19. P. Ren, M. Wen, K. Zhang, S. Du, Y. Zhang, J. Chen, and W. Zheng: Acta Mater., 2018, vol. 160, pp. 72–84.10.1016/j.actamat.2018.08.055 ↗
20. N. Zhao, Y. Xu, J. Wang, L. Zhong, V.E. Ovcharenko, and X. Cai: Surf. Coat. Technol., 2016, vol. 286, pp. 347–53.10.1016/j.surfcoat.2015.12.057 ↗
21. Z. Shang, H. Bai, L. Zhong, Q. Zhang, and Y. Xu: JOM, 2020, vol. 72, pp. 2974–82.10.1007/s11837-020-04177-6 ↗
22. A. Miyoshi and A. Hara: J. Jpn. Soc. Powder Metall., 1965, vol. 12, pp. 78–84.10.2497/jjspm.12.78 ↗
23. M. Akhlaghi, T. Steiner, S.R. Meka, A. Leineweber, and E.J. Mittemeijer: Acta Mater., 2015, vol. 98, pp. 254–62.10.1016/j.actamat.2015.07.017 ↗