Controlling Mechanical Behavior of TWIP Steels by Tuning Texture and Stacking Faults
Source abstract
Abstract
We developed an Fe–22Mn–0.6C–1.5Al TWIP steel and investigated how thermo-mechanical processes affect the mechanical properties. In this alloy, the low stacking fault energy (SFE) activates the formation of mechanical twins, which reduces the dislocation mean free path during plastic deformation. Thus, a high strain hardening rate is observed. Two processes provided the best combination of yield stress, maximum strength, and strain to fracture: (1) rolling at 20 °C and annealing at 750 °C, and (2) rolling at 600 °C and annealing at 850 °C. Although the dominant deformation mode was dislocation glide combined with twinning, the crystallographic textures were significantly different. The first processing path developed the typical low SFE-FCC rolling texture, which is favorable for twinning. However, the texture developed by the second process shows components typical of medium/high SFE metals. Correlation between microscopy and Rietveld analysis using MAUD showed that a large number of twins formed during rolling at 20 °C and also during annealing at 750 °C. This fact influenced the strain hardening despite the favorable texture. Meanwhile, although the formation of twins during rolling at 600 °C was inhibited, the high number of extrinsic SFs available contributed to twinning during tensile deformation. Both samples achieved more than 1100 MPa ultimate tensile strength and 45 to 50 pct strain to fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. P. Lan and J. Zhang: Metall. Mater. Trans. A, 2018, vol. 49A, p. 147.10.1007/s11661-017-4421-2 ↗
2. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, and H.J. Maier: Acta Mater., 2000, vol. 48, pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
3. I. Karaman, H. Sehitoglu, A.J. Beaudoev, Y.I. Chumlyakov, H.J. Maier, and C.N. Tomé: Acta Mater., 2000, vol. 48, pp. 2031–047.10.1016/S1359-6454(00)00051-3 ↗
4. O. Bouaziz and N. Guelton: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 246–49.10.1016/S0921-5093(00)02019-0 ↗
5. B.C. De Cooman, Y. Estrin, and S.K. Kim: Acta Mater., 2018, vol. 142, pp. 283–362.10.1016/j.actamat.2017.06.046 ↗
6. R. Kalsar, P. Khandal, and S. Suwas: Metall. Mater. Trans. A, 2019, vol. 50A, p. 3683.10.1007/s11661-019-05274-1 ↗
7. O. Grässel, L. Krüger, G. Frommeyer, and L. Meyer: Int. J. Plasticity, 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
8. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.10.2355/isijinternational.43.438 ↗
9. O. Bouaziz, S. Allain, C. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
10. B.C. De Cooman, O. Kwon, and K.-G. Chin: Mater. Sci. Technol., 2012, vol. 28, pp. 513–27.10.1179/1743284711Y.0000000095 ↗
11. R. Neu: Mater. Perform. Charact., 2013, vol. 2, pp. 244–84.10.1520/MPC20130009 ↗
12. S. Lee, Y. Estrin, and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 717–30.10.1007/s11661-013-2028-9 ↗
13. X. Guo, C. Sun, C. Wang, J. Jiang, and M.W. Fu: Int. J. Plasticity, 2021, vol. 145, 103076.10.1016/j.ijplas.2021.103076 ↗
14. C. Zhou, B. Fang, J. Wang, D. Tang, H. Tao, Y. He, Z. Zhou, C. Chen, and L. Zhang: Int. J. Fatigue, 2021, vol. 151, 106362.10.1016/j.ijfatigue.2021.106362 ↗
15. R. Wei, K. Zhang, L. Chen, Z. Hanc, T. Wang, C. Chen, J. Jiang, T. Hue, and F. Li: J. Mater. Sci. Technol., 2020, vol. 57, pp. 153–58.10.1016/j.jmst.2020.05.010 ↗
16. A. Suresh and G. Diwakar: Mater. Today, 2021, vol. 38, pp. 2417–424.
17. C. D’Hondt, V. Doquet, and J.P. Couzinié: Mater. Sci. Eng. A, 2021, vol. 814, p. 141250.10.1016/j.msea.2021.141250 ↗
18. M.C. Jo, A. Zargaran, S.S. Sohn, N.J. Kim, and S. Lee: Mater. Sci. Eng. A, 2021, vol. 806, 140823.10.1016/j.msea.2021.140823 ↗
19. Y. Chen, X. Zhang, Z. Cai, Y. Wang, and H. Ding: Mater. Sci. Eng. A, 2021, vol. 811, 141062.10.1016/j.msea.2021.141062 ↗
20. J. Xu, Z. Wang, Y. Yan, J. Li, and M. Wu: Mater. Charact., 2020, vol. 170, 110682.10.1016/j.matchar.2020.110682 ↗
21. N.K. Tewary, S.K. Ghosh, A. Mandal, A.D. Chakrabarti, and S. Chatterjee: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 4483–498.10.1007/s11661-020-05851-9 ↗
22. V. García-García, I. Mejía, and F. Reyes-Calderón: Mater. Charact., 2019, vol. 147, pp. 1–10.10.1016/j.matchar.2018.10.012 ↗
23. V. García-García, I. Mejía, F. Reyes-Calderón, J.A. Benito, and J.M. Cabrera: J. Manuf. Process., 2020, vol. 59, pp. 801–15.10.1016/j.jmapro.2020.09.042 ↗
24. D. Cornette, P. Cugy, A. Hildenbrand, M. Bouzekri, and G. Lovato: Rev. Met. Paris, 2005, vol. 102, pp. 905–18.10.1051/metal:2005151 ↗
25. J. Kim, Y. Estrin, and B.C. De Cooman: Metall. Mater. Trans. A, 2018, vol. 49A, p. 5919.10.1007/s11661-018-4910-y ↗
26. A.V. Druker, V. Fuster, L. Isola, R. Bolmaro, and J. Malarría: Procedia Mater. Sci., 2015, vol. 9, pp. 187–94.10.1016/j.mspro.2015.04.024 ↗
27. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
28. L. Lutterotti, S. Matthies, H.-R. Wenk, A.J. Schultz, and J. Richardson: J. Appl. Phys., 1997, vol. 81, pp. 594–600.10.1063/1.364220 ↗
29. L. Lutterotti: Maud (Material Analysis Using Diffraction), 1997, http://maud.radiographema.com.
30. N.C. Popa: J. Appl. Crystallogr., 1998, vol. 31, pp. 176–80.10.1107/S0021889897009795 ↗
31. B.E. Warren: X-Ray Diffraction, Dover, New York, 1990, pp. 275–98.
32. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024–1037.10.1107/S0021889808030112 ↗
33. Y.Z. Tian, Y. Bai, L.J. Zhao, S. Gao, H.K. Yang, A. Shibata, Z.F. Zhang, and N. Tsuji: Mater. Charact., 2017, vol. 126, pp. 74–80.10.1016/j.matchar.2016.12.026 ↗
34. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449–62.10.1016/j.actamat.2011.07.009 ↗
35. S.R. Kalidindi: Int. J. Plasticity, 1998, vol. 14, pp. 1265–77.10.1016/S0749-6419(98)00054-0 ↗
36. Z. Nasiri, S. Ghaemifar, M. Naghizadeh, and H. Mirzadeh: Met. Mater. Int., 2021, vol. 27, pp. 2078–94.10.1007/s12540-020-00700-1 ↗
37. V. Fuster, A.V. Druker, A. Baruj, J. Malarría, and R. Bolmaro: Mater. Charact., 2015, vol. 109, pp. 128–37.10.1016/j.matchar.2015.09.026 ↗
38. M.J. Sohrabi, M. Naghizadeh, and H. Mirzadeh: Arch. Civ Mech. Eng., 2020, vol. 20, pp. 1–24.10.1007/s43452-019-0008-6 ↗
39. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert: Mater. Sci. Eng. A, 2009, vol. 500(1–2), pp. 196–206.10.1016/j.msea.2008.09.031 ↗
40. K. Williamson and R.E. Smallman III.: Philos. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗
41. C. Barret: Estructura de los metales métodos cristalográficos, fundamentos y datos, 2nd ed. Editorial Aguilar, Madrid, 1957, pp. 586–94.
42. M. Hatherley and W.B. Hutchinson: An Introduction to Textures in Metals, Institution of Metallurgists, London, 1979, pp. 38–52.
43. L. Bracke, K. Verbeken, L. Kestens, and J. Penning: Acta Mater., 2009, vol. 57, pp. 1512–24.10.1016/j.actamat.2008.11.036 ↗
44. N.P. Gurao, P. Kumar, B. Bhattacharya, A. Haldar, and S. Suwas: Metall. Mater. Trans. A, 2021, vol. 43A, pp. 5193–5201.
45. L. Barrales-Mora, Y. Lü, and D.A. Molodov: Steel Res. Int., 2011, vol. 82, pp. 119–26.10.1002/srin.201000261 ↗
46. S. Curtze and V.-T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–141.10.1016/j.actamat.2010.05.049 ↗
47. C. Maurice and J. Driver: Mater. Sci. Forum, 1994, vol. 157–162, pp. 807–12.10.4028/www.scientific.net/MSF.157-162.807 ↗
48. M. Haupt, M. Müller, C. Haase, S. Sevsek, F. Brasche, A. Schwedt, and G. Hirt: Metals, 2019, vol. 9, p. 79.10.3390/met9070797 ↗
49. J.W.H.G. Slakhorst: Acta Metall., 1975, vol. 23, pp. 301–08.10.1016/0001-6160(75)90122-4 ↗
50. P. Yang, Q. Xie, L. Meng, H. Ding, and Z. Tang: Scr. Mater., 2006, vol. 55, pp. 629–31.10.1016/j.scriptamat.2006.06.004 ↗
51. F. Brasche, J. Wang, I. Timokhina, C. Haase, R. Lapovok, and D.A. Molodov: Mater. Sci. Eng. A, 2019, vol. 764, 138183.10.1016/j.msea.2019.138183 ↗
52. S. Allain, J.P. Chateau-Cornu, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗