journal article·2022-10

Design and Achievement of Metallurgical Bonding of Mg/Al Interface Prepared by Liquid–Liquid Compound Casting via a Co-deposited Cu–Ni Alloy Coating

Guangyu Li, Wenming Jiang, Feng Guan, Junwen Zhu, Yang Yu, Zitian Fan

Publisher page

Abstract

The metallurgical bonding of Mg/Al bimetal by liquid–liquid compound casting was realized via co-deposition Cu–Ni alloy coating. The metallurgical layer of the Mg/Al bimetal consisted of Cu solid solution, Cu2Mg and (Al0.7Cu1.3) Mg, Mg solid solution, Al3Ni2, and Mg2Cu. Vickers hardness of the interface was between 149.9 and 209 HV, which was significantly lower than those of Al–Mg intermetallic compounds. The formation mechanism of the interface was attributed to interdiffusion among AZ91D, A356, and Cu–Ni alloy coating.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. G. Li, W. Jiang, F. Guan, J. Zhu, Z. Zhang, and Z. Fan: J. Mater. Process. Tech., 2021, vol. 288, p. 116874.10.1016/j.jmatprotec.2020.116874 ↗
2. S. Fan, W. Jiang, G. Li, J. Mo, and Z. Fan: Mater. Manuf. Process., 2017, vol. 32, pp. 1391–97.10.1080/10426914.2017.1328118 ↗
3. H. Zhang, Y. Chen, and A.A. Luo: Scr. Mater., 2014, vol. 86, pp. 52–55.10.1016/j.scriptamat.2014.05.007 ↗
4. X. Bi, Y. Hu, R. Li, H. Zhao, and T. Li: J. Alloy. Compd., 2022, vol. 900, p. 163417.10.1016/j.jallcom.2021.163417 ↗
5. B. Feng, Z. Sun, Y. Wu, X. Feng, J. Wang, and K. Zheng: J. Alloy. Compd., 2020, vol. 842, p. 155676.10.1016/j.jallcom.2020.155676 ↗
6. S.M. Hosseini, M. Roostaei, M. Mosavi Mashhadi, H. Jabbari, and G. Faraji: J. Mater. Eng. Perform., 2022, https://doi.org/10.1007/s11665-021-06514-5.10.1007/s11665-021-06514-5 ↗
7. Y. Tian, H. Hu, and D. Zhang: Int. J. Adv. Manuf. Tech., 2021, vol. 116, pp. 2569–75.10.1007/s00170-021-07513-5 ↗
8. L. Zhan, G. Wang, J. Yang, D. Kong, W. Zhang, and G. Wang: J Mater. Eng. Perform., 2020, vol. 29, pp. 4652–58.10.1007/s11665-020-04945-0 ↗
9. M. Hoeschl, W. Wagener, J. Wolf: SAE Tech. Papers Ser., 2006.
10. L. Xiao and N. Wang: J Nucl. Mater., 2015, vol. 456, pp. 389–97.10.1016/j.jnucmat.2014.09.022 ↗
11. S. Mróz, A. Gontarz, K. Drozdowski, H. Bala, and P. Szota: Arch. Civ. Mech. Eng., 2018, vol. 18, pp. 401–12.10.1016/j.acme.2017.09.005 ↗
12. C. Binotsch, D. Nickel, A. Feuerhack, and B. Awiszus: Procedia. Eng., 2014, vol. 81, pp. 540–45.10.1016/j.proeng.2014.10.036 ↗
13. W. Förster, C. Binotsch, and B. Awiszus: Metals., 2018, vol. 8, pp. 1–1.10.3390/met8020097 ↗
14. B. Feng, Y. Xin, F. Guo, H. Yu, Y. Wu, and Q. Liu: Acta Mater., 2016, vol. 120, pp. 379–90.10.1016/j.actamat.2016.08.079 ↗
15. Y. Lin and C. Lin: Corros. Sci., 2021, vol. 180, 109203.10.1016/j.corsci.2020.109203 ↗
16. W. Hu, Z. Ma, S. Ji, S. Qi, M. Chen, and W. Jiang: J. Mater. Sci. Technol., 2020, vol. 53, pp. 41–52.10.1016/j.jmst.2020.01.069 ↗
17. H.K. Yang, J. Qiu, C. Cao, Y.D. Li, Z.X. Song, and W.J. Liu: Mater. Sci. Eng. A, 2022, vol. 835, 142677.10.1016/j.msea.2022.142677 ↗
18. Z. Zhang, W. Jiang, G. Li, J. Wang, F. Guan, G. Jie, and Z. Fan: Mater. Sci. Eng. A, 2021, vol. 826, p. 141998.10.1016/j.msea.2021.141998 ↗
19. R. Mola, T. Bucki, and M. Gwoździk: JOM, 2019, vol. 71, pp. 2078–86.10.1007/s11837-019-03405-y ↗
20. Z. Zhang, W. Jiang, G. Li, J. Wang, F. Guan, G. Jie, and Z. Fan: J Mater. Sci. Technol., 2022, vol. 105, pp. 214–25.10.1016/j.jmst.2021.08.011 ↗
21. Z. Jiang, Z. Fan, W. Jiang, G. Li, Y. Wu, F. Guan, and H. Jiang: J. Mater. Process. Tech., 2018, vol. 261, pp. 149–58.10.1016/j.jmatprotec.2018.06.013 ↗
22. Q. Hu, Z. Jiang, W. Jiang, G. Li, F. Guan, H. Jiang, and Z. Fan: Int. J Adv. Manuf. Tech., 2019, vol. 101, pp. 1125–32.10.1007/s00170-018-2990-x ↗
23. M. Pintore, M. Pintore, O. Starykov, O. Starykov, T. Mittler, T. Mittler, W. Volk, W. Volk, B. Tonn, and B. Tonn: Int. J. Metalcast., 2018, vol. 12, pp. 9–88.10.1007/s40962-017-0140-0 ↗
24. J. Sun, X. Song, T. Wang, Y. Yu, M. Sun, Z. Cao, and T. Li: Mater. Lett., 2012, vol. 67, pp. 21–23.10.1016/j.matlet.2011.08.112 ↗
25. R.F. Zhang and K. Rajan: Chem. Phys. Lett., 2014, vol. 612, pp. 177–81.10.1016/j.cplett.2014.08.024 ↗
26. M.N. Raveendran and A.C. HegdeZ: Mater. Today Proc., 2022, https://doi.org/10.1016/j.matpr.2022.02.361.10.1016/j.matpr.2022.02.361 ↗
27. J. Wang, Z. Zhang, S. Li, L. Meng, Z. Cao, and W. Rao: Calphad, 2021, vol. 75, p. 102325.10.1016/j.calphad.2021.102325 ↗
28. D. Ezemenaka, C. Patino, and A. Genau: J. Alloy. Compd., 2021, vol. 883, p. 160818.10.1016/j.jallcom.2021.160818 ↗
29. G. Li, W. Jiang, F. Guan, J. Zhu, Y. Yu, and Z. Fan: J. Mag. Alloys, 2022, vol. 10, pp. 1075–85.10.1016/j.jma.2021.02.002 ↗
30. G. Li, W. Yang, W. Jiang, F. Guan, H. Jiang, Y. Wu, and Z. Fan: J. Mater. Process. Tech., 2019, vol. 265, pp. 112–21.10.1016/j.jmatprotec.2018.10.010 ↗
31. R.F. Zhang, S.H. Zhang, Z.J. He, J. Jing, and S.H. Sheng: Comput. Phys. Commun., 2016, vol. 209, pp. 58–69.10.1016/j.cpc.2016.08.013 ↗
32. P.K. Ray, M. Akinc, and M.J. Kramer: J. Alloy. Compd., 2010, vol. 489, pp. 357–61.10.1016/j.jallcom.2009.07.062 ↗
33. L.H. Shah, A. Gerlich, and Y. Zhou: Int. J Adv. Manuf. Tech., 2018, vol. 94, pp. 2667–78.10.1007/s00170-017-1038-y ↗
34. Z. Peng, T. Zhou, Y. Li, Z. Cui, Z. Wu, and J. Yan: Mater. Des., 2021, vol. 197, p. 109218.10.1016/j.matdes.2020.109218 ↗