journal article·2022-08

Role of Remelting in Grain Refinement of Undercooled Single-Phase Alloys

L. Yang, L. J. Liu, Q. Y. Qin, J. F. Li

Publisher page

Abstract

Bulk and thin samples of Cu75Ni25 (at. pct) alloy were solidified over a range of undercoolings. Unlike the bulk samples, in which grains were significantly refined at undercoolings between 45 K and 75 K, the thin samples solidified consistently into developed dendrites till the experimentally achieved largest undercooling of 150 K. The thin samples were subsequently rapidly reheated at a rate of 300 K/s to different target temperatures between the solidus and liquidus temperature interval. Letting the target temperature of heating equal to the highest recalescence temperature in the bulk sample, grain-refined microstructures were obtained in the thin sample that initially solidified at an undercooling between 45 K and 75 K. For the other thin samples, however, the dendritic morphology was still maintained. Raising the target temperature of heating to an enough high level, grain refinement also occurred in these thin samples. It is demonstrated grains are refined only when large-scale remelting occurs in the original dendrite stems with a critical remelted fraction of about 0.82 at the stem center.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J.F. Li, Y.C. Liu, Y.L. Lu, G.C. Yang, and Y.H. Zhou: J. Cryst. Growth, 1998, vol. 192, pp. 462–70.10.1016/S0022-0248(98)00399-6 ↗
2. M. Schwarz, A. Karma, K. Eckler, and D.M. Herlach: Phys. Rev. Lett., 1994, vol. 73, pp. 1380–83.10.1103/PhysRevLett.73.1380 ↗
3. E.G. Castle, A.M. Mullis, and R.F. Cochrane: Acta Mater., 2014, vol. 66, pp. 378–87.10.1016/j.actamat.2013.11.027 ↗
4. X. Xu, H. Hou, Y. Zhao, and F. Liu: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4777–85.10.1007/s11661-017-4194-7 ↗
5. H. Wang, Y. An, X. Xu, X. Guo, and Y. Hu: Mater. Charact., 2020, vol. 170, 110703.10.1016/j.matchar.2020.110703 ↗
6. F. Gärtner, A.F. Norman, A.L. Greer, A. Zambon, E. Ramous, K. Eckler, and D.M. Herlach: Acta Mater., 1997, vol. 45, pp. 51–66.10.1016/S1359-6454(96)00166-8 ↗
7. G.D. Merz and T.Z. Kattamis: Metall. Mater. Trans. A, 1977, vol. 8A, pp. 295–98.10.1007/BF02661643 ↗
8. F. Liu, X. Guo, and G.C. Yang: J. Cryst. Growth, 2000, vol. 219, pp. 489–94.10.1016/S0022-0248(00)00759-4 ↗
9. F. Liu and G.C. Yang: J. Cryst. Growth, 2001, vol. 231, pp. 295–305.10.1016/S0022-0248(01)01438-5 ↗
10. F. Liu and G.C. Yang: Int. Mater. Rev., 2006, vol. 51, pp. 145–70.10.1179/174328006X102484 ↗
11. B. Dang, Z. Jian, J. Xu, and J. Yan: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 789–95.10.1007/s11661-016-3882-z ↗
12. M. Li, T. Ishikawa, S. Yoda, K. Nagashio, and K. Kuribayashi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3254–57.10.1007/s11661-005-0097-0 ↗
13. K. Eckler, A.F. Norman, F. Gärtner, A.L. Greer, and D.M. Herlach: J. Cryst. Growth, 1997, vol. 173, pp. 528–40.10.1016/S0022-0248(96)01066-4 ↗
14. N. Haque, R.F. Cochrane, and A.M. Mullis: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5424–31.10.1007/s11661-017-4290-8 ↗
15. J.F. Li, W.Q. Jie, G.C. Yang, and Y.H. Zhou: Acta Mater., 2002, vol. 50, pp. 1797–1807.10.1016/S1359-6454(02)00032-0 ↗
16. A. Zambon, B. Badan, K. Eckler, F. Gärtner, A.F. Norman, A.L. Greer, D.M. Herlach, and E. Ramous: Acta Mater., 1998, vol. 46, pp. 4657–70.10.1016/S1359-6454(98)00141-4 ↗
17. G.J. Abbaschian and M.C. Flemings: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 1147–57.10.1007/BF02659862 ↗
18. Y.Z. Chen, F. Liu, G.C. Yang, N. Liu, C.L. Yang, H. Xie, and Y.H. Zhou: Mater. Charact., 2008, vol. 59, pp. 412–16.10.1016/j.matchar.2007.02.009 ↗
19. N. Liu, F. Liu, G.C. Yang, Y. Chen, D. Chen, C. Yang, and Y. Zhou: Physica B, 2007, vol. 387, pp. 151–55.10.1016/j.physb.2006.03.101 ↗
20. M. Li, G. Yang, and Y. Zhou: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2941–49.10.1007/s11661-999-0131-8 ↗
21. N. Liu, G. Yang, F. Liu, Y. Chen, C. Yang, Y. Lu, D. Chen, and Y. Zhou: Mater. Charact., 2006, vol. 57, pp. 115–20.10.1016/j.matchar.2005.12.008 ↗
22. J.L. Walker: Phys. Chem. Process Metall. 2, 1959, vol. 2, p. 845.
23. G. Horvay: Int. J. Heat Mass Transf., 1965, vol. 8, pp. 195–243.10.1016/0017-9310(65)90110-9 ↗
24. J.D. Hunt and K.A. Jackson: J. Appl. Phys., 1966, vol. 37, pp. 254–57.10.1063/1.1707821 ↗
25. T.Z. Kattamis and M.C. Flemings: Mod. Cast., 1967, vol. 52, pp. 97–104.
26. T.Z. Kattamis: J. Cryst. Growth, 1976, vol. 34, pp. 215–20.10.1016/0022-0248(76)90132-9 ↗
27. G.F. Powell: J. Mater. Sci. Lett., 1991, vol. 10, pp. 745–46.10.1007/BF00723265 ↗
28. G.L.F. Powell and L.M. Hogan: Trans. Met. Soc. AIME, 1969, vol. 245, pp. 407–12.
29. J. Li, G. Yang, and Y. Zhou: Mater. Res. Bull., 1998, vol. 33, pp. 141–48.10.1016/S0025-5408(97)00199-2 ↗
30. T. Zhang, F. Liu, H.F. Wang, and G.C. Yang: Scr. Mater., 2010, vol. 63, pp. 43–46.10.1016/j.scriptamat.2010.03.006 ↗
31. J. Xu, T. Yang, Z. Li, X. Wang, Y. Xiao, and Z. Jian: Sci. Rep., 2020, vol. 10, p. 1380.10.1038/s41598-019-56079-6 ↗
32. X.L. Xu, Y.H. Zhao, and H. Hou: J. Alloy. Compd., 2019, vol. 773, pp. 1131–40.10.1016/j.jallcom.2018.09.228 ↗
33. T.J. Piccone, Y. Wu, Y. Shiohara, and M.C. Flemings: Dendr. Growth Undercooled Nickel Tin Pt, 1987, vol. 2(18), pp. 925–32.
34. J. Zhang, F. Zhang, X. Luo, Q. Zhou, and H. Wang: J. Mater. Sci., 2020, vol. 55, pp. 4094–4112.10.1007/s10853-019-04265-2 ↗
35. W.J. Boettinger, S.R. Coriell, and R. Trivedi: in Rapid Solidification Processing: Principles and Technology IV, R. Mehrabian and P.A. Parrish, eds., Claitor’s Publishing Division, Baton Rouge, LA 1988, pp. 13–25.