journal article·2022-07

Hardness and Indentation Fracture Toughness in a Novel Silicon Composite Synthesized by Spark Plasma Sintering

B. K. Samantaray, S. R. Bakshi, K. V. Rajulapati, S. Gollapudi

Publisher page

Abstract

A composite of 90 wt pct silicon and 10 wt pct of the multi-component Mo44Si26Ta5Zr5Fe3Co12Y5 was synthesized using spark plasma sintering at a temperature of 1423 K and applied pressure of 75 MPa. The relative density of the composite following the spark plasma sintering was found to be 99 pct. Indentation fracture toughness measurements in the composite using a Vickers diamond indenter yielded a value of 2.29 MPa m1/2 which is higher than that of elemental silicon at 1.43 MPa m1/2. The second phase provided an average hardness of 14 GPa, while silicon demonstrated hardness of 12 GPa.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. W. Heywang and K.H. Zaininger: Silicon, 2004, pp. 25–42.10.1007/978-3-662-09897-4_2 ↗
2. L. El Chaar, L.A. Lamont, and N. El Zein: Renew. Sustain. Energy Rev., 2011, vol. 15, pp. 2165–75.10.1016/j.rser.2011.01.004 ↗
3. D.S. Fischer: Doctoral dissertation, Massachusetts Inst. Technol., 2010.
4. M.F. Ashby: Elsevier., 1992, vol. 3, p. 665.
5. C.P. Chen and M. H. Leipold: No. ACS PAPER 32-B-78, 1980.10.1016/S0012-3692(16)40206-0 ↗
6. F. Ericson, S. Johansson, and J.Å. Schweitz: Mater. Sci. Eng., 1988, vol. 105–106, pp. 131–41.10.1016/0025-5416(88)90489-2 ↗
7. H. Kahn, N. Tayebi, R. Ballarini, R.L. Mullen, and A.H. Heuer: Sens. Actuators A Phys., 2000, vol. 82, pp. 274–80.10.1016/S0924-4247(99)00366-0 ↗
8. I. Chasiotis, S.W. Cho, and K. Jonnalagadda: J. Appl. Mech. Trans. ASME., 2006, vol. 73, pp. 714–22.10.1115/1.2172268 ↗
9. G.A. Gogotsi: Ceram. Int., 2003, vol. 29, pp. 777–84.10.1016/S0272-8842(02)00230-4 ↗
10. J. Salem, G. Quinn, and M. Jenkins: Fracture Mechanics of Ceramics, Springer, Boston, 2005, pp. 531–53.10.1007/978-0-387-28920-5_40 ↗
11. D.S. Fischer and C.A. Schuh: Intermetallics., 2011, vol. 19, pp. 1661–73.10.1016/j.intermet.2011.07.015 ↗
12. D.S. Fischer and C.A. Schuh: J. Am. Ceram. Soc., 2012, vol. 95, pp. 1406–13.10.1111/j.1551-2916.2012.05075.x ↗
13. R.O. Ritchie: Nat. Mater., 2011, vol. 10, pp. 817–22.10.1038/nmat3115 ↗
14. A.G. Evans and A.H. Heuer: J. Am. Ceram. Soc., 1980, vol. 63, pp. 241–48.10.1111/j.1151-2916.1980.tb10712.x ↗
15. H.-C. Loh, T. Divoux, B. Gludovatz, P.U.P.A. Gilbert, R.O. Ritchie, F.-J. Ulm, and A. Masic: Commun. Mater., 2020, vol. 1, pp. 1–10.10.1038/s43246-020-00078-y ↗
16. X.H. Zhang, Z. Wang, P. Hu, W.B. Han, and C.Q. Hong: Scripta Mater., 2009, vol. 61, pp. 809–12.10.1016/j.scriptamat.2009.07.001 ↗
17. X.Q. Zhang, E. Ma, and J. Xu: J. Non. Cryst. Solids., 2006, vol. 352, pp. 3985–94.10.1016/j.jnoncrysol.2006.07.041 ↗
18. J.J. Lewandowski, M. Shazly, and A.S. Nouri: Scipta Mater., 2006, vol. 54, pp. 337–41.10.1016/j.scriptamat.2005.10.010 ↗
19. J. Xu, U. Ramamurty, and E. Ma: JOM., 2010, vol. 64, pp. 10–18.10.1007/s11837-010-0052-4 ↗
20. K.S. Chan: Metall. Trans. A., 1993, vol. 24A, pp. 569–83.10.1007/BF02656627 ↗
21. ASTM F 2094-01: Annu. B. Stand. Int., West Conshohocken, PA, 2003.
22. H. Awaji, S.M. Choi, and E. Yagi: Mech. Mater., 2002, vol. 34, pp. 411–22.10.1016/S0167-6636(02)00129-1 ↗
23. M. Taya, S. Hayashi, A.S. Kobayashi, and H.S. Yoon: J. Am. Ceram. Soc., 1990, vol. 73, pp. 1382–91.10.1111/j.1151-2916.1990.tb05209.x ↗
24. M.F. Ashby: Acta Met., 1989, vol. 37, pp. 1273–93.10.1016/0001-6160(89)90158-2 ↗
25. J. Selsing: J. Am. Ceram. Soc., 1961, vol. 44, pp. 419–19.10.1111/j.1151-2916.1961.tb15475.x ↗
26. M.S.A. Karunaratne, S. Kyaw, A. Jones, R. Morrell, and R.C. Thomson: J. Mater. Sci., 2016, vol. 51, pp. 4213–26.10.1007/s10853-015-9554-3 ↗
27. B.D. Dunn: Materials and Processes for Spacecraft and High Reliability Applications, Springer, New York, 2016.10.1007/978-3-319-23362-8 ↗
28. G.B. Skinner and H.L. Johnston: J. Chem. Phys., 1953, vol. 21, pp. 1383–84.10.1063/1.1699227 ↗
29. D. R. Lide: ed. CRC handbook of chemistry and physics, CRC press, 2004.
30. S. Gollapudi: Trans. Indian Inst. Met., 2019, vol. 72, pp. 2275–80.10.1007/s12666-019-01676-2 ↗
31. X. Sun and J.A. Yeomans: J. Mater. Sci. Technol., 1996, vol. 12, pp. 124–34.
32. R.W. Davidge and T.J. Green: J. Mater. Sci., 1968, vol. 3, pp. 629–34.10.1007/BF00757910 ↗
33. R.J. Jaccodine: J. Electrochem. Soc., 1963, vol. 110, p. 524.10.1149/1.2425806 ↗