journal article·2022-03

Weld Quality and Microstructure Development in Ultrasonically Welded Titanium Joints

A. A. Mukhametgalina, M. A. Murzinova, A. A. Nazarov

Publisher page

Abstract

Joints of 0.5 mm thick sheets of commercially pure titanium have been processed by ultrasonic spot welding with the amplitude of vibrations 20 µm and welding time 2 and 3 seconds under the clamping force varied from 5 to 7 kN. It is shown that an increase in the clamping force and welding time results in an increase of the dimensions of defect-free bonded area and decrease of the thickness of the sheets. Ultrasonic welding results in the formation of thermomechanically affected zone (TMAZ), in which significant changes in the microstructure and microtexture occur. The α grain size in the central region of the TMAZ increases from 7 up to 130 µm, the fraction of low angle boundaries increases and sharp peaks near 60 deg and 90 deg appear in the misorientation angle distribution of α grain boundaries. The ultrasonically welded samples exhibit high lap shear strengths similar to those obtained by resistance spot welding.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. H.O. Willrich: Weld. J., 1950, vol. 18, pp. 61–66.
2. M.P. Matheny and K.F. Graff: Power Ultrasonics—Applications of High-Intensity Ultrasound, Woodhead, Cambridge, 2015, pp. 259–93.
3. Z.L. Ni and F.X. Ye: J. Manuf. Process.., 2018, vol. 35, pp. 580–94.10.1016/j.jmapro.2018.09.009 ↗
4. Z. Su, Z. Zhu, Y. Zhang, H. Zhang, and Q. Xiao: Metals., 2021, vol. 11, p. 61.10.3390/met11010061 ↗
5. D. Bakavos and P.B. Prangnell: Mater. Sci. Eng. A., 2010, vol. 527, pp. 6320–34.10.1016/j.msea.2010.06.038 ↗
6. C.Q. Zhang, J.D. Robson, and P.B. Prangnell: J. Mater. Process. Technol., 2016, vol. 231, pp. 382–88.10.1016/j.jmatprotec.2016.01.008 ↗
7. J. Devine: ASM Handbook, Welding, Brazing, and Soldering, vol. 6, ASM International, Materials Park, 1994, pp. 900–10.
8. V.M. Sagalevich: Welding in Mechanical Engineering: Handbook, Mechanical Engineering Publishers, Moscow, 1979, p. 75. (in Russian).
9. R. Jahn, R. Cooper, and D. Wilkosz: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 570–83.10.1007/s11661-006-9087-0 ↗
10. A. Macwan and D.L. Chen: Mater. Des., 2015, vol. 84, pp. 261–69.10.1016/j.matdes.2015.06.104 ↗
11. Z.L. Ni, J.J. Yang, Y.X. Hao, L.F. Chen, S. Li, X.X. Wang, and F.X. Ye: Int. J. Adv. Manuf. Technol., 2020, vol. 107, pp. 585–606.10.1007/s00170-020-04997-5 ↗
12. H.T. Fujii, H. Endo, Y.S. Sato, and H. Kokawa: Mater. Charact., 2018, vol. 139, pp. 233–40.10.1016/j.matchar.2018.03.010 ↗
13. L. Xu, L. Wang, Y.C. Chen, J.D. Robson, and P.B. Prangnell: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 334–46.10.1007/s11661-015-3179-7 ↗
14. V.K. Patel, S.D. Bhole, and D.L. Chen: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 2055–66.10.1007/s11661-013-2123-y ↗
15. A. Panteli, J.D. Robson, Y.C. Chen, and P.B. Prangnell: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 5773–81.10.1007/s11661-013-1928-z ↗
16. J. Yang, B. Cao, and Q. Lu: Materials., 2017, vol. 10, p. 193.10.3390/ma10020193 ↗
17. B. Sanga, R. Wattal, and D.S. Nagesh: Period. Eng. Nat. Sci., 2018, vol. 6, pp. 107–19.
18. W.J. Lewis, J.N. Antonevich, R.E. Monroe, and P.J. Rieppel: Fundamental Studies on the Mechanism of Ultrasonic Welding, WADD Technical Report 60-607, 1960.
19. M. Bloss and K. Graff: Trends Weld. Res. Proc. 8th Int. Conf., ASM International, Metals Park, OH, 2009, pp. 348–53.
20. T. Owa, T. Kondo, and H. Takizawa: Weld. Int., 2010, vol. 24, pp. 182–87.10.1080/09507110902843115 ↗
21. Z. Zhu, M. Li, Z. Su, D. Zhang, and Y. Zhang: Transactions on Intelligent Welding Manufacturing, Springer, Singapore, 2018, pp. 120–29.10.1007/978-981-10-5355-9_11 ↗
22. S. Lee, T. Kim, S. Hu, W. Cai, J. Li, and J. Abell: J. Manuf. Sci. Eng. Trans. ASME, 2012, vol. 135, 021004.
23. J.-Y. Lin, Z.-H. Lai, T. Otsuki, H.-W. Yen, and Sh. Nambu: Mater. Sci. Eng. A., 2021, vol. 825, p. 141885.10.1016/j.msea.2021.141885 ↗
24. J.-Y. Lin, Sh. Nambu, and T. Koseki: Scripta Mater., 2020, vol. 178, pp. 218–22.10.1016/j.scriptamat.2019.11.037 ↗
25. M.P. Satpathy, B. Patel, and S.K. Sahoo: Ain Shams Eng. J., 2019, vol. 10, pp. 811–19.10.1016/j.asej.2019.07.007 ↗
26. H. Conrad: Prog. Mater. Sci., 1981, vol. 26, pp. 123–403.10.1016/0079-6425(81)90001-3 ↗
27. N. Gey and M. Humbert: Acta Mater., 2002, vol. 50, pp. 277–87.10.1016/S1359-6454(01)00351-2 ↗
28. W.G. Burgers: Physica., 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
29. SYu. Mironov and M.M. Myshlyaev: Phys. Solid State., 2007, vol. 49, pp. 858–64.10.1134/S1063783407050095 ↗
30. S.C. Wang, M. Aindow, and M.J. Starink: Acta Mater., 2003, vol. 51, pp. 2485–2503.10.1016/S1359-6454(03)00035-1 ↗
31. X.Y. Wang, W.Y. Li, T.J. Ma, and A. Vairis: Mater. Des., 2017, vol. 116, pp. 115–26.10.1016/j.matdes.2016.12.005 ↗
32. Y. Jiang, Zh. Chen, C. Zhan, T. Chen, R. Wang, and Ch. Liu: Mater. Sci. Eng. A., 2015, vol. 640, pp. 436–42.10.1016/j.msea.2015.06.028 ↗
33. S. Elangovan, S. Semeer, and K. Prakasan: J. Mater. Process. Technol., 2009, vol. 209, pp. 1143–50.10.1016/j.jmatprotec.2008.03.032 ↗
34. H. Huang, J. Chen, Y.C. Lim, X. Hu, J. Cheng, Zh. Feng, and X. Sun: J. Mater. Process. Technol., 2019, vol. 272, pp. 125–36.10.1016/j.jmatprotec.2019.05.016 ↗
35. F. Haddadi and D. Tsivoulas: Mater. Charact., 2016, vol. 118, pp. 340–51.10.1016/j.matchar.2016.06.004 ↗
36. Z. Su, Z. Zhu, Y. Zhang, and H. Zhang: Mater. Res., 2021, vol. 24, p. e20200488.10.1590/1980-5373-mr-2020-0488 ↗
37. U. Zwicker: Titan und titanlegierungen, Springer, Berlin, 1974, pp. 248–337.10.1007/978-3-642-80587-5_12 ↗
38. I. Weiss and S.L. Semiatin: Mater. Sci. Eng. A., 1999, vol. 263, pp. 243–56.10.1016/S0921-5093(98)01155-1 ↗
39. H. Peng, D. Chen, and X. Jiang: Materials., 2017, vol. 10, p. 449.10.3390/ma10050449 ↗
40. V.K. Patel, S.D. Bhole, and D. Chen: Mater. Sci. Eng. A., 2013, vol. 569, pp. 78–85.10.1016/j.msea.2013.01.042 ↗
41. A. Macwan and D.L. Chen: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 1686–97.10.1007/s11661-016-3355-4 ↗
42. Z.L. Ni and F.X. Ye: Mater. Lett., 2016, vol. 185, pp. 204–07.10.1016/j.matlet.2016.08.129 ↗
43. A. Badamian, C. Iwamoto, S. Sato, and S. Tashiro: Metals., 2019, vol. 9, p. 532.10.3390/met9050532 ↗
44. L. Zhou, J. Min, W. He, Y. Huang, and X. Song: J. Manuf. Process.., 2018, vol. 33, pp. 64–73.10.1016/j.jmapro.2018.04.013 ↗
45. C.Q. Zhang, J.D. Robson, O. Ciuca, and P.B. Prangnell: Mater. Charact., 2014, vol. 97, pp. 83–91.10.1016/j.matchar.2014.09.001 ↗
46. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed. Elsevier Ltd., Amsterdam, 2004.
47. M.S. Oh, J.-Y. Lee, and J.K. Park: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 3071–77.10.1007/s11661-004-0052-5 ↗
48. Y.-C. Chen, D. Bakavos, A. Gholinia, and P.B. Prangnell: Acta Mater., 2012, vol. 60, pp. 2816–28.10.1016/j.actamat.2012.01.047 ↗
49. I.E. Gunduz, T. Ando, E. Shattuck, P.Y. Wong, and C.C. Doumanidis: Scripta Mater., 2005, vol. 52, pp. 939–43.10.1016/j.scriptamat.2004.12.015 ↗