journal article·2021-11

Role of Ti on Phase Evolution, Oxidation and Nitridation of Co–30Ni–10Al–8Cr–5Mo–2Nb–(0, 2 & 4) Ti Cobalt Base Superalloys at Elevated Temperature

Apurba Roy, Mahander Pratap Singh, Saurabh Mohan Das, Surendra Kumar Makineni, Kamanio Chattopadhyay

Publisher page

Abstract

Titanium is an important alloying addition to γ/γ′ cobalt-based superalloys that enhances the high temperature microstructural stability and make the alloys lighter. In this work, we probe the role of Ti composition on the phase stability and oxidation behavior of Co–30Ni–10Al–8Cr–5Mo–2Nb superalloys. With Ti addition, the γ′-solvus temperature is enhanced and the γ′-precipitate shape changes from spherical to rounded cuboids. Addition of 4 at. pct Ti to the alloy promotes topologically-close-packed (TCP) phase formation that are rich in Co, Cr, and Mo. During oxidation at 900 °C, Ti was found to facilitate the early formation of passivating oxide layers (spinel CoCr2O4/CoAl2O4) on the exposed surfaces, however, it was not effective in reducing the oxidation-induced mass gain. Microstructural analysis reveals that Ti delays the Al2O3 layer formation eventually leading to faster oxidation kinetics. Additionally, we also found formation of (Ti,Nb)N in the γ′ denuded zones near the alloy-oxide interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. C.S. Lee: PhD Thesis, The University of Arizona, 1971.
2. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science., 2006, vol. 312, pp. 90–1.10.1126/science.1121738 ↗
3. S.K. Makineni, B. Nithin, and K. Chattopadhyay: Scripta Mater., 2015, vol. 98, pp. 36–9.10.1016/j.scriptamat.2014.11.009 ↗
4. S.K. Makineni, B. Nithin, and K. Chattopadhyay: Acta Mater., 2015, vol. 85, pp. 85–94.10.1016/j.actamat.2014.11.016 ↗
5. S.K. Makineni, A. Samanta, T. Rojhirunsakool, T. Alam, B. Nithin, A.K. Singh, R. Banerjee, and K. Chattopadhyay: Acta Mater., 2015, vol. 97, pp. 29–40.10.1016/j.actamat.2015.06.034 ↗
6. F.L. Reyes Tirado, J. Perrin Toinin, and D.C. Dunand: Acta Mater., 2018, vol. 151, pp. 137–48.10.1016/j.actamat.2018.03.057 ↗
7. Y. Chen, C. Wang, J. Ruan, S. Yang, T. Omori, R. Kainuma, K. Ishida, J. Han, Y. Lu, and X. Liu: Acta Mater., 2020, vol. 188, pp. 652–64.10.1016/j.actamat.2020.02.049 ↗
8. Y. Chen, C. Wang, J. Ruan, T. Omori, R. Kainuma, K. Ishida, and X. Liu: Acta Mater., 2019, vol. 170, pp. 62–74.10.1016/j.actamat.2019.03.013 ↗
9. M.P. Singh, S.K. Makineni, and K. Chattopadhyay: Mater. Sci. Eng. A., 2020, vol. 794, p. 139826.10.1016/j.msea.2020.139826 ↗
10. P. Pandey, S. Mukhopadhyay, C. Srivastava, S.K. Makineni, and K. Chattopadhyay: Mater. Sci. Eng. A., 2020, vol. 790, p. 139578.10.1016/j.msea.2020.139578 ↗
11. C.H. Zenk, I. Povstugar, R. Li, F. Rinaldi, S. Neumeier, D. Raabe, and M. Göken: Acta Mater., 2017, vol. 135, pp. 244–51.10.1016/j.actamat.2017.06.024 ↗
12. J.J. Ruan, X.J. Liu, S.Y. Yang, W.W. Xu, T. Omori, T. Yang, B. Deng, H.X. Jiang, C.P. Wang, R. Kainuma, and K. Ishida: Intermetallics., 2018, vol. 92, pp. 126–32.10.1016/j.intermet.2017.09.015 ↗
13. H.J. Im, S.K. Makineni, B. Gault, F. Stein, D. Raabe, and P.-P. Choi: Scripta Mater., 2018, vol. 154, pp. 159–62.10.1016/j.scriptamat.2018.05.041 ↗
14. S.K. Makineni, M.P. Singh, and K. Chattopadhyay: Annu. Rev. Mater. Res., 2021, vol. 51, pp. 187–208.10.1146/annurev-matsci-080619-014459 ↗
15. P. Pandey, S.K. Makineni, A. Samanta, A. Sharma, S.M. Das, B. Nithin, C. Srivastava, A.K. Singh, D. Raabe, B. Gault, and K. Chattopadhyay: Acta Mater., 2019, vol. 163, pp. 140–53.10.1016/j.actamat.2018.09.049 ↗
16. N. Baler, P. Pandey, M.P. Singh, S.K. Makineni, and K. Chatopadhyay: TMS, Superalloys, 2020.
17. K. Shinagawa, T. Omori, J. Sato, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Mater. Trans., 2008, vol. 49, pp. 1474–9.10.2320/matertrans.MER2008073 ↗
18. B. Gao, L. Wang, Y. Liu, X. Song, S.Y. Yang, and A. Chiba: Corros. Sci., 2019, vol. 157, pp. 109–15.10.1016/j.corsci.2019.05.036 ↗
19. C.A. Stewart, A. Suzuki, R.K. Rhein, T.M. Pollock, and C.G. Levi: Metall Mater. Trans. A., 2019, vol. 50A, pp. 5445–58.10.1007/s11661-019-05413-8 ↗
20. M. Weiser, M.C. Galetz, H.-E. Zschau, C.H. Zenk, S. Neumeier, M. Göken, and S. Virtanen: Corros. Sci., 2019, vol. 156, pp. 84–95.10.1016/j.corsci.2019.05.007 ↗
21. L. Klein, Y. Shen, M.S. Killian, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2713–20.10.1016/j.corsci.2011.04.020 ↗
22. S.M. Das, M.P. Singh, and K. Chattopadhyay: Corros. Sci., 2020, vol. 172, p. 108683.10.1016/j.corsci.2020.108683 ↗
23. Y. Chen, F. Xue, C. Wang, X. Li, Q. Deng, X. Yang, H. Long, W. Li, L. Yang, and A. Li: Corros. Sci., 2019, vol. 161, p. 108179.10.1016/j.corsci.2019.108179 ↗
24. D.-W. Chung, J.P. Toinin, E.A. Lass, D.N. Seidman, and D.C. Dunand: J. Alloys Compds., 2020, vol. 832, p. 154790.10.1016/j.jallcom.2020.154790 ↗
25. S. Mukhopadhyay, P. Pandey, N. Baler, K. Biswas, S.K. Makineni, and K. Chattopadhyay: Acta Mater., 2021, vol. 208, p. 116736.10.1016/j.actamat.2021.116736 ↗
26. P.J. Bocchini, C.K. Sudbrack, R.D. Noebe, D.C. Dunand, and D.N. Seidman: Mater. Sci. Eng. A., 2017, vol. 705, pp. 122–32.10.1016/j.msea.2017.08.034 ↗
27. S.P. Hagen, M. Weiser, D. Kubacka, E. Spiecker, and S. Virtanen: Oxid Met., 2020, vol. 94, pp. 477–503.10.1007/s11085-020-10003-w ↗
28. M. Weiser, Y.M. Eggeler, E. Spiecker, and S. Virtanen: Corros. Sci., 2018, vol. 135, pp. 78–86.10.1016/j.corsci.2018.02.020 ↗
29. S.M. Das, M.P. Singh, and K. Chattopadhyay: Corros. Sci., 2019, vol. 155, pp. 46–54.10.1016/j.corsci.2019.02.013 ↗
30. H.-Y. Yan, V.A. Vorontsov, and D. Dye: Corros. Sci., 2014, vol. 83, pp. 382–95.10.1016/j.corsci.2014.03.002 ↗
31. L. Klein, M.S. Killian, and S. Virtanen: Corros. Sci., 2013, vol. 69, pp. 43–9.10.1016/j.corsci.2012.09.046 ↗
32. F. Fan, H. Sun, D. Zhao, and J.B. Sha: Effect of Mo on the High Temperature Oxidation Behavior of Co-Al-W Based Alloys, /MSF.747-748.754. Accessed 27 April 2020.10.4028/www.scientific.net/MSF.747-748.754 ↗
33. K.A. Christofidou, N.G. Jones, M.C. Hardy, and H.J. Stone: Oxid. Met., 2016, vol. 85, pp. 443–58.10.1007/s11085-015-9606-8 ↗
34. T.L. Barth and E.A. Marquis: Oxid. Met., 2019, vol. 92, pp. 13–26.10.1007/s11085-019-09911-3 ↗
35. S. Cruchley, H.E. Evans, M.P. Taylor, M.C. Hardy, and S. Stekovic: Corros. Sci., 2013, vol. 75, pp. 58–66.10.1016/j.corsci.2013.05.016 ↗
36. S. Pedrazzini, B.S. Rowlands, A. Turk, I.M.D. Parr, M.C. Hardy, P.A.J. Bagot, M.P. Moody, E. Galindo-Nava, and H.J. Stone: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 3024–9.10.1007/s11661-019-05246-5 ↗
37. G.P. Wagner and G. Simkovich: Oxid Met., 1986, vol. 26, pp. 139–55.10.1007/BF00664278 ↗
38. M.E. El-Dahshan: Trans. Jpn. Inst. Met., 1981, vol. 22, pp. 25–34.10.2320/matertrans1960.22.25 ↗
39. A Thermodynamic Database for Ni‐Base Superalloys—Dupin—2001—Scandinavian Journal of Metallurgy—Wiley Online Library, https://doi.org/10.1034/j.1600-0692.2001.300309.x. Accessed 24 March 2021.10.1034/j.1600-0692.2001.300309.x ↗
40. T. Omori, K. Oikawa, J. Sato, I. Ohnuma, U.R. Kattner, R. Kainuma, and K. Ishida: Intermetallics., 2013, vol. 32, pp. 274–83.10.1016/j.intermet.2012.07.033 ↗
41. H. Long, S. Mao, Y. Liu, Z. Zhang, and X. Han: J. Alloy. Compd., 2018, vol. 743, pp. 203–20.10.1016/j.jallcom.2018.01.224 ↗
42. S. Neumeier, H.U. Rehman, J. Neuner, C.H. Zenk, S. Michel, S. Schuwalow, J. Rogal, R. Drautz, and M. Göken: Acta Mater., 2016, vol. 106, pp. 304–12.10.1016/j.actamat.2016.01.028 ↗
43. B. Chattopadhyay and G.C. Wood: Oxid. Met., 1970, vol. 2, pp. 373–99.10.1007/BF00604477 ↗
44. S. Cruchley, H. Evans, and M. Taylor: Mater. High Temp., 2016, vol. 33, pp. 465–75.10.1080/09603409.2016.1171952 ↗
45. J.H. Chen, P.M. Rogers, and J.A. Little: Oxid. Met., 1997, vol. 47, pp. 381–410.10.1007/BF02134783 ↗
46. Isothermal oxidation behavior of Tribaloy TM T400 and T800 | npj Materials Degradation, https://www.nature.com/articles/s41529-018-0060-3. Accessed 25 July 2021.
47. F. Zhong, F. Fan, S. Li, and J. Sha: Prog. Nat. Sci., 2016, vol. 26, pp. 600–12.10.1016/j.pnsc.2016.11.005 ↗
48. M. Chen, B. Hallstedt, and L.J. Gauckler: JPE., 2003, vol. 24, pp. 212–27.10.1361/105497103770330514 ↗
49. S.F. Frederick and I. Cornet: J. Electrochem. Soc., 1955, vol. 102, p. 285.10.1149/1.2430049 ↗
50. L. Klein, A. Bauer, S. Neumeier, M. Göken, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2027–34.10.1016/j.corsci.2011.02.033 ↗
51. I. Bantounas, B. Gwalani, T. Alam, R. Banerjee, and D. Dye: Scripta Mater., 2019, vol. 163, pp. 44–50.10.1016/j.scriptamat.2018.12.025 ↗
52. P.K. Kofstad and A.Z. Hed: J. Electrochem. Soc., 1969, vol. 116, p. 229.10.1149/1.2411803 ↗
53. P.K. Kofstad and A.Z. Hed: J. Electrochem. Soc., 1969, vol. 116, p. 224.10.1149/1.2411802 ↗
54. J. Östby and M. Chen: J. Alloy. Compd., 2009, vol. 485, pp. 427–34.10.1016/j.jallcom.2009.05.135 ↗
55. R.A. Rapp: Corrosion., 2013, vol. 21, pp. 382–401.10.5006/0010-9312-21.12.382 ↗
56. B.A. Pint and K.B. Alexander: J. Electrochem. Soc., 1998, vol. 145, p. 1819.10.1149/1.1838563 ↗
57. B.A. Pint, M. Treska, and L.W. Hobbs: Oxid. Met., 1997, vol. 47, pp. 1–20.10.1007/BF01682369 ↗
58. A. Sato, Y.-L. Chiu, and R.C. Reed: Acta Mater., 2011, vol. 59, pp. 225–40.10.1016/j.actamat.2010.09.027 ↗
59. D.R. Glasson and S.A.A. Jayaweera: J. Appl. Chem., 1968, vol. 18, pp. 65–77.10.1002/jctb.5010180301 ↗