journal article·2021-11Open access

The Microstructure and Properties of Carbon Thin Films on Nanobainitic Steel

Emilia Skołek, Monika Meredyk, Michał Tarnowski, Tomasz Borowski, Krzysztof Kulikowski, Rafał Chodun, Szymon Marciniak, Jerzy Robert Sobiecki, Wiesław Świątnicki

Abstract

Abstract The aim of this study was to assess whether it is possible to produce a high adhesive carbon coating by applying low-temperature RFCVD and glow discharge methods on nanobainitic X37CrMoV5-1 steel with and without nitrided sublayer. For this purpose, several methods of investigation were used: observations of coating morphology by scanning electron microscopy (SEM), analysis of bonds found in coatings (Raman spectroscopy), microhardness tests and adhesion of coatings (Scratch tests). Our research has shown that low-temperature RFCVD and glow discharge processes of nanobainitic X37CrMoV5-1 steel allow producing carbon coatings that can be described as hardened carbon coatings with very high hardness—> 2000 HV 0.25 in case of RFCVD processes and > 3300 HV 0.025 for glow discharge process and low friction coefficient—near 0.12 at 5 N load. However, the adhesion of produced coatings to the steel substrate strongly depends on the appropriate selection of the process parameters and on the proper preparation of the substrate before the deposition regarding the thermal stability of nanobainite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. F.G. Caballero, H.K.D.H. Bhadeshia, and K.J.A. Mawella: Mater. Sci. Technol., 2002, vol. 18, pp. 279–84. https://doi.org/10.1179/026708301225000725.10.1179/026708301225000725 ↗
2. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1821–5. https://doi.org/10.2355/isijinternational.43.1821.10.2355/isijinternational.43.1821 ↗
3. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1238–43. https://doi.org/10.2355/isijinternational.43.1238.10.2355/isijinternational.43.1238 ↗
4. E. Jezierska, J. Dworecka, and K. Rożniatowski: Achiev. Metall. Mater., 2014, vol. 59, pp. 1633–6. https://doi.org/10.2478/amm-2014-0277.10.2478/amm-2014-0277 ↗
5. E. Skołek, S. Marciniak, and W. Świątnicki: Achiev. Metall. Mater., 2015, vol. 60, pp. 511–6. https://doi.org/10.1515/amm-2015-0082.10.1515/amm-2015-0082 ↗
6. A.R. Olszyna: Superhard ceramics (in polish), Oficyna Wydawnicza Politechniki Warszawskiej, 2011.
7. H. Ronkainen, S. Varjus, J. Koskinen, and K. Holmberg: Wear., 2001, vol. 249, pp. 260–6. https://doi.org/10.1016/S0043-1648(01)00558-0.10.1016/S0043-1648(01)00558-0 ↗
8. J. Robertson: Mater. Sci. Eng., 2002, vol. 37, pp. 129–281. https://doi.org/10.1016/S0927-796X(02)00005-0.10.1016/S0927-796X(02)00005-0 ↗
9. V.M. Puzikov and A.V. Semenov: Surf. Coat. Technol., 1991, vol. 47, pp. 445–54. https://doi.org/10.1016/0257-8972(91)90310-S.10.1016/0257-8972(91)90310-S ↗
10. X.-M. He, W.-Z. Li, and H.-D. Li: Surf. Coat. Technol., 1996, vol. 84, pp. 414–9. https://doi.org/10.1016/S0257-8972(95)02818-8.10.1016/S0257-8972(95)02818-8 ↗
11. V. Anita, T. Butsuda, N. Saito, and O. Takai: Vacuum., 2006, vol. 80, pp. 736–9. https://doi.org/10.1016/j.vacuum.2005.11.020.10.1016/j.vacuum.2005.11.020 ↗
12. A. Modabberasl, P. Kameli, M. Ranjbar, H. Salamati, and R. Ashiri: Carbon., 2015, vol. 94, pp. 485–93. https://doi.org/10.1016/j.carbon.2015.06.081.10.1016/j.carbon.2015.06.081 ↗
13. M. Tarnowski, et al.: Diam. Relat. Mater., 2017, vol. 75, pp. 123–30. https://doi.org/10.1016/j.diamond.2017.02.013.10.1016/j.diamond.2017.02.013 ↗
14. T. Stapiński, Uczelniane Wydawnictwa Naukowo-Dydaktyczne, Kraków 2008
15. C.A. Charitidis: J. Refract. Metals Hard Mater., 2010, vol. 28, pp. 51–70. https://doi.org/10.1016/j.ijrmhm.2009.08.003.10.1016/j.ijrmhm.2009.08.003 ↗
16. T. Borowski, et al.: Surf. Coat. Technol., 2020, vol. 392, 125705. https://doi.org/10.1016/j.surfcoat.2020.125705.10.1016/j.surfcoat.2020.125705 ↗
17. T. Borowski, et al.: Arch. Metall. Mater., 2020, vol. 65(3), pp. 1141–6. https://doi.org/10.24425/amm.2020.133231.10.24425/amm.2020.133231 ↗
18. T. Borowski, et al.: Mater. Sci., 2016, vol. 22(3), pp. 323–9. https://doi.org/10.5755/j01.ms.22.3.7532.10.5755/j01.ms.22.3.7532 ↗
19. M.H. Ghasemi, et al.: Diam. Relat. Mater., 2019, vol. 93, pp. 8–15. https://doi.org/10.1016/j.diamond.2019.01.016.10.1016/j.diamond.2019.01.016 ↗
20. P. Zhang, F.C. Zhang, Z.G. Yan, T.S. Wang, and L.H. Qian: Wear., 2011, vol. 271, pp. 697–704. https://doi.org/10.1016/j.wear.2010.12.025.10.1016/j.wear.2010.12.025 ↗
21. F.C. Zhang, T.S. Wang, P. Zhang, C.L. Zheng, B. Lv, M. Zhang, and Y.Z. Zheng: Scripta Mater., 2008, vol. 59, pp. 294–6. https://doi.org/10.1016/j.scriptamat.2008.03.024.10.1016/j.scriptamat.2008.03.024 ↗
22. P. Zhang, F.C. Zhang, and T.S. Wang: Appl. Surf. Sci., 2011, vol. 257, pp. 7609–14. https://doi.org/10.1016/j.apsusc.2011.03.138.10.1016/j.apsusc.2011.03.138 ↗
23. D. Fabijanic, I. Timokhina, H. Beladi, and P. Hodgson: Metals., 2017, vol. 7, pp. 1–8. https://doi.org/10.3390/met7070234.10.3390/met7070234 ↗
24. E. Skołek, S. Marciniak, P. Skoczylas, J. Kaminski, and W.A. Swiatnicki: Achiev. Metall. Mater., 2015, vol. 60, pp. 491–3. https://doi.org/10.1515/amm-2015-0079.10.1515/amm-2015-0079 ↗
25. E. Skołek, S. Marciniak, and W. Świątnicki: Achiev. Metall. Mater., 2015, vol. 60, pp. 517–21. https://doi.org/10.1515/amm-2015-0083.10.1515/amm-2015-0083 ↗
26. W.G. Cui, Q.B. Lai, L. Zhang, and F.M. Wang: Surf. Coat. Technol., 2010, vol. 205, pp. 1995–9. https://doi.org/10.1016/j.surfcoat.2010.08.093.10.1016/j.surfcoat.2010.08.093 ↗
27. A.C. Ferrari, A. Libassi, B.K. Tanner, V. Stolojan, J. Yuan, L.M. Brown, S.E. Rodil, B. Kleinsorge, and J. Robertson: Phys. Rev. B., 2000, vol. 62, pp. 11089–103. https://doi.org/10.1103/PhysRevB.62.11089.10.1103/PhysRevB.62.11089 ↗
28. A.C. Ferrari: Diam. Relat. Mater., 2002, vol. 11, pp. 1053–61. https://doi.org/10.1016/S0925-9635(01)00730-0.10.1016/S0925-9635(01)00730-0 ↗
29. PN-EN ISO 6507-1:2018-05, Metallic materials—Vickers hardness test—Part 1: Test method
30. ASTM C1624-05, Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
31. K. Zdunek, R. Chodun, B. Wicher, K. Nowakowska-Langier, and S. Okrasa: Spectrochim. Acta Part A., 2018, vol. 194, pp. 136–40. https://doi.org/10.1016/j.saa.2018.01.015.10.1016/j.saa.2018.01.015 ↗
32. C. Casiraghi, A.C. Ferrari, and J. Robertson: Phys. Rev. B., 2005, vol. 72, 085401. https://doi.org/10.1103/PhysRevB.72.085401.10.1103/PhysRevB.72.085401 ↗
33. A.C. Ferrari and J. Robertson: Phys. Rev B., 2000, vol. 61, pp. 14095–107. https://doi.org/10.1103/PhysRevB.61.14095.10.1103/PhysRevB.61.14095 ↗
34. B. Ben-Nissan, A.H. Choi, B.A. Latella, and A. Bendavid: Comprehensive Biomater. II., 2017, vol. 3, pp. 128–43. https://doi.org/10.1016/B978-0-12-803581-8.10102-X.10.1016/B978-0-12-803581-8.10102-X ↗
35. Z. Zhang and J. Luo: Encyclopedia of Tribology, Springer, Boston, 2013.
36. H. Kovaci, Ö. Baran, A.F. Yetim, Y.B. Bozkurt, L. Kara, and A. Çelik: Surf. Coat. Technol., 2018, vol. 349, pp. 969–79. https://doi.org/10.1016/j.surfcoat.2018.05.084.10.1016/j.surfcoat.2018.05.084 ↗
37. A. Erdemir: Tribol. Int., 2004, vol. 37, pp. 1005–12. https://doi.org/10.1016/j.triboint.2004.07.018.10.1016/j.triboint.2004.07.018 ↗
38. K.R. Lee, K.Y. Eun, I. Kim, and J. Kim: Thin Solid Films., 2000, vol. 377–378, pp. 261–8.
39. R. Ali, M. Sebastiani, and E. Bemporad: Mater. Des., 2015, vol. 75, pp. 47–56. https://doi.org/10.1016/j.matdes.2015.03.007.10.1016/j.matdes.2015.03.007 ↗
40. M.H. Ghasemi, B. Ghasemi, and H.R.M. Semnani: Diamond Relat. Mater., 2019, vol. 93, pp. 8–15. https://doi.org/10.1016/j.diamond.2019.01.016.10.1016/j.diamond.2019.01.016 ↗
41. A. da Silva Rocha, T. Strohaecker, V. Tomala, and T. Hirsch: Surf. Coat. Technol., 1999, vol. 115, pp. 24–31. https://doi.org/10.1016/S0257-8972(99)00063-8.10.1016/S0257-8972(99)00063-8 ↗
42. H. Kovacı, Ö. Baran, Ö. Bayrak, A.F. Yetim, and A. Celik: J. Adhes. Sci. Technol., 2017, vol. 31, pp. 2015–27. https://doi.org/10.1080/01694243.2017.1293923.10.1080/01694243.2017.1293923 ↗
43. C. Alves Jr., E.F. Silva, and A.E. Martinelli: Surf. Coat. Technol., 2001, vol. 139, pp. 1–5. https://doi.org/10.1016/S0257-8972(00)01146-4.10.1016/S0257-8972(00)01146-4 ↗
44. B. Podgornik, J. Vizintin, H. Ronkainen, and K. Holmberg: Thin Solid Films., 2000, vol. 377–378, pp. 254–60. https://doi.org/10.1016/S0040-6090(00)01302-X.10.1016/S0040-6090(00)01302-X ↗
45. B. Podgornik and J. Vižintin: Influence of substrate treatment on the tribological properties of DLC coatings. Diam. Relat. Mater., 2001, vol. 10, pp. 2232–7. https://doi.org/10.1016/S0925-9635(01)00514-3.10.1016/S0925-9635(01)00514-3 ↗
46. V. Leskovšek, B. Podgornik, and D. Nolan: Mater. Charact., 2008, vol. 59, pp. 454–61. https://doi.org/10.1016/j.matchar.2007.03.009.10.1016/j.matchar.2007.03.009 ↗
47. R.R.M. de Sousa, Y.J.L. Moura, P.A.O. de Sousa, J.Q.M. Neto, T.H. de Carvalhocosta, and C. Alves Jr.: Mat. Res., 2014, https://doi.org/10.1590/S1516-14392014005000027.10.1590/S1516-14392014005000027 ↗
48. M. Olzon-Dionysio, M. Campos, M. Kapp, S. de Souza, and S.D. de Souza: Surf. Coat. Technol., 2010, vol. 204, pp. 3623–8. https://doi.org/10.1016/j.surfcoat.2010.04.034.10.1016/j.surfcoat.2010.04.034 ↗
49. T. Burakowski and T. Wierzchoń: Surface Engineering of Metals (in polish), Wydawnictwo Naukowo-Techniczne, Warszawa, 1995.
50. T. Borowski, J. Kamiński, J. Trojanowski, and T. Wierzchoń: Archiwum Technologii Maszyn i Automatyzacji., 2010, vol. 30, pp. 69–77.
51. C. Ruset, S. Ciuca, and E. Grigore: Surf. Coat. Technol., 2003, vol. 174–175, pp. 1201–5. https://doi.org/10.1016/S0257-8972(03)00589-9.10.1016/S0257-8972(03)00589-9 ↗
52. M.H. Ghasemi, B. Ghasemi, H.R.M. Semnani, and M. Erfanmanesh: Ceram. Int., 2021, vol. 47, pp. 12467–75. https://doi.org/10.1016/j.ceramint.2021.01.104.10.1016/j.ceramint.2021.01.104 ↗
53. H. Shafyei and R. Ashiri: Ceram. Int., 2019, vol. 45, pp. 14821–8. https://doi.org/10.1016/j.ceramint.2019.04.213.10.1016/j.ceramint.2019.04.213 ↗
54. I.B. Timokhina, M.K. Miller, H. Beladi, and P.D. Hodgson: J. Mater. Res., 2016, vol. 31, pp. 806–18. https://doi.org/10.1557/jmr.2016.73.10.1557/jmr.2016.73 ↗