journal article·2021-09

Effect of C–N Interaction on Hydrogen Embrittlement of 15Cr–15Mn–4Ni-Based Austenitic Stainless Steels

Kyung-Shik Kim, Jee-Hyun Kang, Sung-Joon Kim

Publisher page

Abstract

Hydrogen diffusion and embrittlement in an austenitic steel with 0.2 wt pct carbon and 0.2 wt pct nitrogen were investigated. The simultaneous alloying of both carbon and nitrogen did not reduce hydrogen diffusivity more than single alloying of nitrogen due to the interaction between carbon and nitrogen. During tensile straining, a low density of cracks initiated at the grain boundaries at an early deformation stage. The cracks propagated either along the grain boundaries and twin boundaries, or the paths where e martensite was concentrated, which resulted in mixed intergranular and transgranular fracture modes. Still, the resistance to hydrogen embrittlement improved in comparison with the single alloying of either carbon or nitrogen due to enhanced austenite stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. M.R. Louthan and R.G. Derrick: Corros. Sci., 1975, vol. 15, pp. 565–77. .10.1016/0010-938X(75)90022-0 ↗
2. Y. Yagodzinskyy, O. Todoshchenko, S. Papula, and H. Hänninen: Steel Res. Int., 2011, vol. 82, pp. 20–5. .10.1002/srin.201000227 ↗
3. L. Zhang, Z. Li, J. Zheng, Y. Zhao, P. Xu, and C. Zhou: Int. J. Hydrog. Energy., 2013, vol. 38, pp. 8208–14. .10.1016/j.ijhydene.2013.01.198 ↗
4. M. Koyama, S. Okazak, T. Sawaguchi, and K. Tsuzaki: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 2656–73. .10.1007/s11661-016-3431-9 ↗
5. R.P. Reed and M.W. Austin: Scripta Metall., 1989, vol. 23, pp. 1359–62. .10.1016/0036-9748(89)90059-8 ↗
6. V.G. Gavriljuk: Mater. Sci. Eng. A., 2006, vol. 438–440, pp. 75–9. .10.1016/j.msea.2006.01.097 ↗
7. K.J. Irvine, T. Gladman, and F.B. Pickering: J. Iron Steel Inst., 1969, vol. 119, pp. 1017–28. .
8. H.-Y. Ha and T.-H. Lee: C-S Oh and S-J Kim. Scripta Mater., 2009, vol. 61, pp. 121–4. .10.1016/j.scriptamat.2009.03.018 ↗
9. Y. Tomota, Y. Xia, and K. Inoue: Acta Mater., 1998, vol. 46, pp. 1577–87. .10.1016/S1359-6454(97)00350-9 ↗
10. K.-S. Kim, J.-H. Kang, and S.-J. Kim: Mater. Sci. Eng. A., 2018, vol. 712, pp. 114–21. .10.1016/j.msea.2017.11.099 ↗
11. B.D. Shanina, V.G. Gavriljuk, H. Berns, and F. Schmalt: Steel Res., 2002, vol. 73, pp. 105–13. .10.1002/srin.200200181 ↗
12. H. Berns, V.G. Gavriljuk, S. Riedner, and A. Tyshchenko: Steel Res. Int., 2007, vol. 78, pp. 714–9. .10.1002/srin.200706274 ↗
13. F. Schmalt, H. Berns, and V. G. Gavriljuk: Proc. 7th Int. Conf. High Nitrogen Steels, Ostend, Belgium, 19–22 September, 2004, pp. 437–46.
14. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Mater. Sci. Eng. A., 2008, vol. 481–482, pp. 707–12. .10.1016/j.msea.2006.11.186 ↗
15. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Acta Mater., 2000, vol. 48, pp. 3879–93. .10.1016/S1359-6454(00)00192-0 ↗
16. A.G. Balanyuk, V.G. Gavriljuk, V.N. Shivanyuk, A.I. Tyshchenko, and J.C. Rawers: Acta Mater., 2000, vol. 48, pp. 3813–21. .10.1016/S1359-6454(00)00208-1 ↗
17. V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–83. .10.1016/0001-6160(89)90143-0 ↗
18. V.G. Gavriljuk, A.I. Tyshchenko, V.V. Bliznuk, I.L. Yakovleva, S. Riedner, and H. Berns: Steel Res. Int., 2008, vol. 79, pp. 413–22. .10.1002/srin.200806147 ↗
19. K.-S. Kim, J.-H. Kang, and S.-J. Kim: Corros. Sci., 2021, vol. 180, p. 109226. .10.1016/j.corsci.2020.109226 ↗
20. K.-S. Kim, J.-H. Kang, and S.-J. Kim: Scripta Mater., 2020, vol. 184, pp. 70–3. .10.1016/j.scriptamat.2020.03.038 ↗
21. International Organization for Standardization: ISO17081. Method of Measurement of Hydrogen Permeation and Determination of Hydrogen Uptake and Transport in Metals by an Electrochemical Technique, ISO, 2004.
22. K. Nohara, Y. Ono, and N. Ohashi: Tetsu-to-Hagané., 1977, vol. 63, pp. 772–82. .10.2355/tetsutohagane1955.63.5_772 ↗
23. A.E. Pontini and J.D. Hermida: Scripta Mater., 1997, vol. 37, pp. 1831–7. .10.1016/S1359-6462(97)00332-1 ↗
24. A. Inoue, Y. Hosoya, and T. Masumoto: Trans. Iron Steel Inst. Jpn., 1979, vol. 19, pp. 170–8. .10.2355/isijinternational1966.19.170 ↗
25. K.-S. Kim, J.-H. Kang, and S.-J. Kim: JOM., 2020, vol. 72, pp. 2011–9. .10.1007/s11837-020-04108-5 ↗
26. G.M. Pressouyre: Metall. Trans. A., 1979, vol. 10, pp. 1571–3. .10.1007/BF02812023 ↗
27. Y. Zhao, D.-H. Lee, M.-Y. Seok, J.-A. Lee, M.P. Phaniraj, and J.-Y. Suh: Scripta Mater., 2017, vol. 135, pp. 54–8. .10.1016/j.scriptamat.2017.03.029 ↗
28. A.R. Troiano: Metallogr. Microstruct. Anal., 2016, vol. 5, pp. 557–69. .10.1007/s13632-016-0319-4 ↗
29. R.A. Oriani: Annu. Rev. Mater. Sci., 1978, vol. 8, pp. 327–57. .10.1146/annurev.ms.08.080178.001551 ↗
30. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A., 1994, vol. 176, pp. 191–202. .10.1016/0921-5093(94)90975-X ↗
31. M. Kim, C.B. Geller, and A.J. Freeman: Scripta Mater., 2004, vol. 50, pp. 1341–3. .10.1016/j.scriptamat.2004.02.003 ↗
32. V.G. Gavriljuk, H. Hanninen, A.S. Tereshchenko, and K. Ullakko: Scripta Metall. Mater., 1993, vol. 28, pp. 247–52. .10.1016/0956-716X(93)90571-9 ↗
33. S. Simonetti, L. Moro, G. Brizuela, and A. Juan: Int. J. Hydrog. Energy., 2006, vol. 31, pp. 1318–25. .10.1016/j.ijhydene.2005.11.019 ↗
34. M. Aucouturier: J. Phys. Colloq., 1982, vol. 43, pp. C6-175–86. .
35. Y. He, Y. Su, H. Yu, and C. Chen: Int. J. Hydrog. Energy., 2021, vol. 46, pp. 7589–600. .10.1016/j.ijhydene.2020.11.238 ↗