journal article·2021-06

A Pathway to Grain Structure Control of Gas Tungsten Arc Welded Duplex Stainless Steel Through Ultrasonic Vibration

Jianfeng Wang, Yuying Chen

Publisher page

Abstract

In-depth understanding of microstructural modification and grain refinement is required to manufacture high quality products by gas tungsten arc welding. Here, we report the governing role of ultrasonic vibration in the improvement of microstructure and mechanical properties of the as-welded duplex stainless steel. We show that the columnar-to-equiaxed transition was promoted and fine equiaxed grains with no preferred crystallographic texture could be achieved involved in welding. Detailed microstructural features coupled with acoustic field simulation were carried out to reveal the mechanisms of grain refinement. This was attributed to the production of many initial nuclei or crystallites which resulted from the acoustic cavitation in the ultrasonic vibration of weld pool. Consequently, the formation of this microstructure led to a significantly increased tensile strength and maintained acceptable ductility. These findings offer a new perspective on control of grain structure in the as-welded condition by extending ultrasonic vibration to duplex stainless steel welding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. [1] N. Jia, R.L. Peng, Y.D. Wang, S. Johansson, and P.K. Liaw: Acta Mater., 2008, vol. 56, pp. 782-93.10.1016/j.actamat.2007.10.040 ↗
2. [2] A. El Bartali, V. Aubin, L. Sabatier, P. Villechaise, and S. Degallaix-Moreuil: Scr. Mater., 2008, vol. 59, pp. 1231-34.10.1016/j.scriptamat.2008.07.044 ↗
3. [3] J.C. Dalton, F. Ernst, and A.H. Heuer: Metall. Mater. Trans. A, 2020, vol. 51, pp. 608-17.10.1007/s11661-019-05553-x ↗
4. [4] D. Statharas, H. Atkinson, R. Thornton, J. Marsden, H. Dong, and S. Wen: Metall. Mater. Trans. A, 2019, vol. 50, pp. 1748-62.10.1007/s11661-019-05140-0 ↗
5. [5] N.S. Biradar and R. Raman: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3179-91.10.1007/s11661-012-1126-4 ↗
6. [6] C.M. Garzon and A.J. Ramirez: Acta Mater., 2006, vol. 54, pp. 3321-31.10.1016/j.actamat.2006.03.018 ↗
7. [7] B. Varbai, Y. Adonyi, R. Baumer, T. Pickle, J. Dobranszky, and K. Majlinger: Weld. J., 2019, vol. 98, pp. 78-87.10.29391/2019.98.006 ↗
8. [8] T. Pickle, N. Henry, P. Morriss, L. Tennis, D. Wagner, and R.E. Baumer: Weld. J., 2019, vol. 98, pp. 123-34.
9. [9] W. Zhang, T. DebRoy, T.A. Palmer, and J.W. Elmer: Acta Mater., 2005, vol. 53, pp. 4441-53.10.1016/j.actamat.2005.05.040 ↗
10. [10] I. Petronius and M. Bamberger: Sci. Technol. Weld. Join., 2001, vol. 6, pp. 79-83.10.1179/136217101101538569 ↗
11. [11] Y. Cui, C. Xu, and Q. Han: Scripta Mater., 2006, vol. 55, pp. 975-8.10.1016/j.scriptamat.2006.08.035 ↗
12. [12] A. Ureña, E. Otero, M.V. Utrilla, and C.J. Múnez: J. Mater. Process. Technol., 2007, vol. 182, pp. 624-31.10.1016/j.jmatprotec.2006.08.030 ↗
13. [13] S. Lu, H. Fujii, and K. Nogi: Scripta Mater., 2004, vol. 51, pp. 271-7.10.1016/j.scriptamat.2004.03.004 ↗
14. [14] L.L. Wang, H.L. Wei, J.X. Xue, and T. DebRoy: Scripta Mater., 2017, vol. 134, pp. 61-5.10.1016/j.scriptamat.2017.02.034 ↗
15. [15] Z. Zhang, Z. Wang, Y. Jiang, H. Tan, D. Han, Y. Guo, and J. Li: Corros. Sci., 2012, vol. 62, pp. 42-50.10.1016/j.corsci.2012.04.047 ↗
16. [16] X.C. Liu, Y.F. Sun, and H. Fujii: Mater. Des., 2017, vol. 129, pp. 151-63.10.1016/j.matdes.2017.05.013 ↗
17. [17] T. DebRoy, T. Mukherjee, H.L. Wei, J.W. Elmer, and J.O. Milewski: Nat. Rev. Mater., 2021, vol. 6, pp. 48-68.10.1038/s41578-020-00236-1 ↗
18. [18] M.J. Huh, S.B. Kim, K.W. Paik, and Y.G. Kim: Scripta Mater., 1997, vol. 36, pp. 775-81.10.1016/S1359-6462(96)00377-6 ↗
19. [19] S.J. Kim, J.K. Kim, and S.H. Park: Scripta Mater., 2015, vol. 96, pp. 33-6.10.1016/j.scriptamat.2014.10.017 ↗
20. [20] D.H. Kang and H.W. Lee: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4678-87.10.1007/s11661-012-1310-6 ↗
21. [21] X. Liu, C. Wu, and G.K. Padhy: Scripta Mater., 2015, vol.102, pp. 95-8.10.1016/j.scriptamat.2015.02.022 ↗
22. [22] T.V. da Cunha and C.E. Bohorquez: Ultrason., 2015, vol. 56, pp. 201-9.10.1016/j.ultras.2014.10.007 ↗
23. [23] Q. Han: Metall. Mater. Trans. B, 2015, vol. 46, pp. 1603-14.10.1007/s11663-014-0266-x ↗
24. [24] J. Wang, Q. Sun, T. Zhang, S. Zhang, Y. Liu, and J. Feng: J. Mater. Process. Technol., 2018, vol. 254, pp. 254-64.10.1016/j.jmatprotec.2017.11.042 ↗
25. [25] C. Fan, W. Xie, C. Yang, S. Lin, and Y. Fan: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4615-21.10.1007/s11661-017-4226-3 ↗
26. [26] W. Xie, C. Fan, C. Yang, and S. Lin: Metall. Mater. Trans. B, 2017, vol. 49, pp. 274-81.
27. [27] J. Wang, Q. Sun, S. Hou, T. Zhang, P. Jin, and J. Feng: Mater. Des., 2019, vol. 181, p. 108051.10.1016/j.matdes.2019.108051 ↗
28. [28] M. Nabahat, K. Ahmadpour, and T. Saeid: Mater. Res. Express, 2018, vol. 5, p. 096509.10.1088/2053-1591/aad662 ↗
29. [29] Y. Wang, C. Yu, H. Lu, and J. Chen: J. Manuf. Process., 2020, vol. 58, pp. 936-54.10.1016/j.jmapro.2020.09.005 ↗
30. [30] T. Yuan, S. Kou, and Z. Luo: Acta Mater., 2016, vol. 106, pp. 144-54.10.1016/j.actamat.2016.01.016 ↗
31. [31] L. He, M. Wu, L. Li, and H. Hao: Appl. Phys. Lett., 2006, vol. 89, p. 131504.10.1063/1.2357857 ↗
32. [32] J. Wang, Q. Sun, J. Liu, B. Wang, and J. Feng: Sci. Technol. Weld. Join., 2016, vol. 22, pp. 465-71.10.1080/13621718.2016.1258812 ↗
33. [33] Y.Y. Hu, H.J. Liu, H. Fujii, H. Araki, K. Sugita, and K. Liu: Scripta Mater., 2020, vol. 185, pp. 117-21.10.1016/j.scriptamat.2020.05.017 ↗
34. [34] D. Zang, L. Li, W. Di, Z. Zhang, C. Ding, Z. Chen, W. Shen, B.P. Binks, and X. Geng: Nat. Commun., 2018, vol. 9, p. 3546.10.1038/s41467-018-05949-0 ↗
35. [35] M.J. Jose, S.S. Kumar, and A. Sharma: Sci. Technol. Weld. Join., 2016, vol. 21, pp. 243-58.10.1179/1362171815Y.0000000088 ↗
36. [36] T. Watanabe, M. Shiroki, A. Yanagisawa, and T. Sasaki: J. Mater. Process. Technol., 2010, vol. 210, pp. 1646-51.10.1016/j.jmatprotec.2010.05.015 ↗
37. [37] Y. Cui, C. Xu, and Q. Han: Adv. Eng. Mater., 2007, vol. 9, pp. 161-3.10.1002/adem.200600228 ↗
38. [38] C. Xu, G. Sheng, H. Wang, and X. Yuan: Sci. Technol. Weld. Join., 2014, vol. 19, pp. 703-7.10.1179/1362171814Y.0000000245 ↗
39. [39] C. Xu, G. Sheng, X. Cao, and X. Yuan: J. Mater. Sci. Technol., 2016, vol. 32, pp. 1253-9.10.1016/j.jmst.2016.08.029 ↗
40. [40] Q. Chen, S. Lin, C. Yang, C. Fan, and H. Ge: Ultrason. Sonochem., 2017, vol. 39, pp. 403-13.10.1016/j.ultsonch.2017.05.001 ↗
41. [41] H. Li, J. Zhang, and Y. Xiong: Sci. Technol. Weld. Join., 2017, vol. 23, pp. 308-15.10.1080/13621718.2017.1386760 ↗
42. [42] X. Wen, X. Cui, G. Jin, X. Zhang, Y. Zhang, D. Zhang, and Y. Fang: J. Alloy. Compd., 2020, vol. 835, p. 155449.10.1016/j.jallcom.2020.155449 ↗
43. [43] J. Wang, Q. Sun, J. Ma, J. Teng, P. Jin, and J. Feng: J. Manuf. Process., 2019, vol. 37, pp. 563-77.10.1016/j.jmapro.2018.12.020 ↗
44. [44] Z. Wei, J.A. Kosterman, R. Xiao, G.Y. Pee, M. Cai, and L.K. Weavers: Ultrason. Sonochem., 2015, vol. 27, pp. 325-33.10.1016/j.ultsonch.2015.05.013 ↗
45. [45] Z. Wei and L.K. Weavers: Ultrason. Sonochem., 2016, vol. 31, pp. 490-8.10.1016/j.ultsonch.2016.01.036 ↗
46. [46] M. Thomä, G. Wagner, B. Straß, B. Wolter, S. Benfer, and W. Fürbeth: J. Mater. Sci. Technol., 2018, vol. 34, pp. 163-72.10.1016/j.jmst.2017.10.022 ↗
47. A. International: ASTM E1245-03-Standard Practice for Determining the Inclusion or Second Phase Constituent Content of Metals by Automatic Image Analysis, ASTM West Conshohocken, 2003.
48. [48] Z. Zhang, H. Jing, L. Xu, Y. Han, and L. Zhao: Mater. Des., 2016, vol. 109, pp. 670-85.10.1016/j.matdes.2016.07.110 ↗
49. [49] G. Wang, M.S. Dargusch, D.G. Eskin, and D.H. StJohn: Adv. Eng. Mater., 2017, vol.19, p. 1700264.10.1002/adem.201700264 ↗
50. [50] L. Aucott, H. Dong, W. Mirihanage, R. Atwood, A. Kidess, S. Gao, S. Wen, J. Marsden, S. Feng, M. Tong, T. Connolley, M. Drakopoulos, C.R. Kleijn, I.M. Richardson, D.J. Browne, R.H. Mathiesen, and H.V. Atkinson: Nat. Commun., 2018, vol. 9, p. 5414.10.1038/s41467-018-07900-9 ↗
51. [51] R. Badji, B. Bacroix, and M. Bouabdallah: Mater. Charact., 2011, vol. 62, pp. 833-43.10.1016/j.matchar.2011.06.001 ↗
52. [52] S. Emami, T. Saeid, and A. Abdollah-zadeh: J. Alloy. Compd., 2019, vol. 810, p. 151797.10.1016/j.jallcom.2019.151797 ↗
53. [53] E.J. Pavlina and C.J.V. Tyne: J. Mater. Eng. Perform., 2008, vol. 17, pp. 888-93.10.1007/s11665-008-9225-5 ↗
54. [54] B. Wang, D. Tan, T.L. Lee, J.C. Khong, F. Wang, D. Eskin, T. Connolley, K. Fezzaa, and J. Mi: Acta Mater., 2018, vol. 144, pp. 505-15.10.1016/j.actamat.2017.10.067 ↗
55. [55] F. Wang, D. Eskin, J. Mi, T. Connolley, J. Lindsay, and M. Mounib: Acta Mater., 2016, vol. 116, pp. 354-63.10.1016/j.actamat.2016.06.056 ↗