journal article·2021-06

Three-Dimensional Network Structure and Mechanical Properties of Al-Cu-Ni-Fe Cast Alloys with Gd Micro-addition

Huawei Zhang, Yue Liu, Tongxiang Fan

Publisher page

Abstract

High-temperature tensile testing and X-ray microscope (XRM) characterization were performed to assess the effects of the micro-addition of Gd and the three-dimensional (3-D) network structure on the improvement of Al-6Cu-3.5Ni-0.8Fe alloy under as-cast conditions. Gd addition contributed to the modification of the microstructure, where a new thermally stable micro-sized Al3CuGd phase was formed, and the refinement occurred in Al3CuNi and Al9FeNi. The tensile test results revealed that the alloy modified with 0.4 pct Gd exhibited optimal properties at 623 K (350 °C), with an ultimate tensile strength, yield strength, and elongation of 74.1 MPa, 61.2 MPa, and 15.5 pct, respectively. Fractographic analysis after the tensile tests indicated that at ambient temperature, brittle cleavage-type fracture of the precipitates and ductile fracture of the matrix were dominant, whereas the transformation from mixed fracture to fully ductile trans-crystalline fracture was detected at elevated temperatures. According to the CT characterization, there was no significant difference in the curvature or interconnectivity of the 3-D network structure formed by the aluminides between before and after the tensile test at 623 K (350 °C). It is believed that the 3-D continuous network structure of aluminides, equipped with excellent heat resistance, plays a pivotal role in the high-temperature performance of the studied alloys. This work provides a new and promising idea for solving the current heat resistance problems of cast Al alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. 1.R. Gholizadeh, S. G. Shabestari: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3447-3458.10.1007/s11661-011-0764-2 ↗
2. L. Lasa, J.M. Rodriguez-lbabe: Mater. Charact., 2002, vol. 48, pp. 371-378.10.1016/S1044-5803(02)00283-8 ↗
3. 3.S.K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman, and D.L. Chen: Mater. Sci. Eng. A, 2015, vol. 636, pp. 361-372.10.1016/j.msea.2015.03.077 ↗
4. 4.P. Srirangam, S. Chattopadhyay, A. Bhattacharya, S. Nag, and J. Kaduk: Acta Mater., 2014, vol. 65, pp. 185-193.10.1016/j.actamat.2013.10.060 ↗
5. 5.M. Schöbel, G. Baumgartner, S. Gerth, J. Bernardi, and M. Hofmann: Acta Mater., 2014, vol. 81, pp. 401-408.10.1016/j.actamat.2014.07.052 ↗
6. 6.F. Xia, X.S. Gao, M.X. Liang, Y.C. Guo, J.P. Li, Z. Yang, J.L. Wang, and L.L. Zhang: J. Mater. Res. Technol., 2020, vol. 9, pp. 12926-12935.10.1016/j.jmrt.2020.09.018 ↗
7. 7.M. Abdulwahab, I.A. Madugu, and S.A. Yaro: Mater. Des., 2011, vol. 32, pp. 1159-1166.10.1016/j.matdes.2010.10.028 ↗
8. 8.J. Hernandez-Sandoval, G.H. Garza-Elizondo, A.M. Samuel, S. Valtiierra, and F.H. Samuel: Mater. Des., 2014, vol. 58, pp. 89-101.10.1016/j.matdes.2014.01.041 ↗
9. 9.A. M. Samuel, J. Gauthier, and F. H. Samuel: Metall. Mater. Trans. A, 1996, vol. 27, pp. 1785-1798.10.1007/BF02651928 ↗
10. J. Chen, E. Costan, M. A. Van Huis: Science, 2006, vol. 312, pp. 416-419.10.1126/science.1124199 ↗
11. X.Y. Suo, H.C. Liao, Y.Y. Hu, U.S. Dixitb, P. Petrov: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1-11.10.1007/s11665-018-3133-0 ↗
12. H.C. Liao, Y.Y. Tang, X.Y. Suo, G.J. Li, Y.Y. Hu, U.S. Dixitb, and P. Petrov: Mater. Sci. Eng. A, 2017, vol. 699, pp. 201-209.10.1016/j.msea.2017.04.091 ↗
13. 13.Z. Qian, X.F. Liu, D.G. Zhao, and G.H. Zhang: Mater. Lett., 2008, vol. 62, pp. 2146-2149.10.1016/j.matlet.2007.11.035 ↗
14. 14.S.K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman, and D.L. Chen: Mater. Sci. Eng. A, 2016, vol. 652, pp. 353-364.10.1016/j.msea.2015.11.049 ↗
15. 15.M. Song, K.H. Chen, and L.P. Huang: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 766-771.10.1016/S1003-6326(06)60323-3 ↗
16. 16.D.H. Xiao, J.N. Wang, D.Y. Ding, and H.L. Yang: J. Alloys Compd., 2003, vol. 352, pp. 84-88.10.1016/S0925-8388(02)01162-3 ↗
17. 17.S.G. Shabestari: Mater. Sci. Eng. A, 2004, vol. 383, pp. 289-298.10.1016/S0921-5093(04)00832-9 ↗
18. 18.A.K. Mukhopadhyay, G.J. Shiflet, and E.A. Starke: Scripta Metallurgica et Materialia, 1990, vol. 24, pp. 307-312.10.1016/0956-716X(90)90261-E ↗
19. 19.Richard A. Karnesky, Marsha E. van Dalen, David C. Dunand, and David N. Seidman: Scripta Mater., 2006, vol. 55, pp. 437-440.10.1016/j.scriptamat.2006.05.021 ↗
20. 20.X.G. Zhang, F.Q. Mei, H.Y. Zhang, S.H. Wang, C.F. Fang, and H. Hao: Mater. Sci. Eng. A, 2012, vol.552, pp. 230-235.10.1016/j.msea.2012.05.035 ↗
21. 21.Y.D. Sui, Q.D. Wang, T. Liu, B. Ye, H.Y. Jiang, and W.J. Ding: J. Alloys Compd., 2015, vol. 644, pp. 228-235.10.1016/j.jallcom.2015.04.164 ↗
22. Y.D. Sui: Study on the microstructural and elevated temperature properties of cast Al-Si-Cu-Ni-Mg alloys. Doctor’s thesis, Shanghai Jiao Tong University, China, 2016 (in Chinese).
23. 23.Y.G. Li, Y. Yang, Y.Y. Wang, L.Y. Wang, and X.F. Liu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7132-7137.10.1016/j.msea.2010.07.073 ↗
24. 24.Z. Asghar, G. Requena, and F. Kubel: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5691-5698.10.1016/j.msea.2010.05.033 ↗
25. 25.F.C. Meng, Y.Y. Wu, K.Q. Hu, Y. Li, and X.F. Liu: Materials, 2019, vol. 12, pp. 2506.10.3390/ma12162506 ↗
26. 26.Y.Y. Yang, S.Y. Zhong, Z. Chen, M.L. Wang, N.H. Ma, and H.W. Wang: J. Alloys Compd., 2015, vol. 647, pp. 63-69.10.1016/j.jallcom.2015.05.167 ↗
27. 27.J. Feng, B. Ye, L.J. Zuo, R.J. Qi, Q.D. Wang, H.Y. Jiang, R. Huang, and W.J. Ding: Mater. Sci. Eng. A, 2017, vol. 706, pp. 27-37.10.1016/j.msea.2017.08.114 ↗
28. G.J. Li, H.C. Liao, X.J. Suo, Y.Y. Tang, U.S. Dixit, and P. Petrov: Mater. Sci. Eng. A, 2018, vol. 709, pp. 90-96.10.1016/j.msea.2017.10.049 ↗
29. 29.Y.G. Li, Y. Yang, Y.Y. Wu, Z.S. Wei, and X.F. Liu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4427-4430.10.1016/j.msea.2011.02.047 ↗
30. 30.G.J. Li, H.C. Liao, and A.Q. Xu: Mater. Sci. Eng. A, 2018, vol. 730, pp. 36-40.10.1016/j.msea.2018.05.100 ↗
31. L.J. Huang, L. Geng, H.X. Peng, and B.K. Aveendran: Mater. Sci. Eng. A, 2012, vol. 534, pp. 688-692.10.1016/j.msea.2011.12.028 ↗
32. 32.Z. Asghar, G. Requena, and E. Bollerb: Acta Mater., 2011, vol. 59, pp. 6420-6432.10.1016/j.actamat.2011.07.006 ↗
33. H.B. Yang, S. Tian, T. Gao, J.F. Nie, Z.S. You, G.L. Liu, H.C. Wang, and X.F. Liu: Mater. Sci. Eng. A, 2019, vol. 763, pp. 1381211-13812111
34. 34.Y.D. Sui,Q.D. Wang,G.L. Wang,and T. Liu: J. Alloys Compd., 2015, vol. 622, pp. 572-579.10.1016/j.jallcom.2014.10.148 ↗
35. R.V. Gumeniuk, B.M. Stelmakhovych, and Y.B. Kuzma: J. Alloys Compd., 2001, vol. 329, pp. 182-188.10.1016/S0925-8388(01)01687-5 ↗
36. 36.V. Raghavan: J. Phase Equilib. Diffus., 2010, vol. 31, pp. 550-551.10.1007/s11669-010-9769-6 ↗
37. 37.N.A. Belov, D.G. Eskin, and N.N. Avxentieva: Acta Mater., 2005, vol. 53, pp. 4709-4722.10.1016/j.actamat.2005.07.003 ↗
38. 38.Muzaffer Zeren: Mater. Des., 2007, vol. 28, pp. 2511-2517.10.1016/j.matdes.2006.09.010 ↗
39. 39.R.C.Atwood, J.R.Jones, P.D.Lee, and L.L.Hench: Scripta Mater., 2004, vol. 51, pp. 1029-1033.10.1016/j.scriptamat.2004.08.014 ↗
40. 40.A.M.A. Mohamed, F.H. Samuel, and S.A. Kahtani: Materials, 2013, vol. 577, pp. 64-72.
41. 41.A.M.A. Mohamed, A.M. Samuel, F.H. Samuel, and H.W. Doty: Mater. Des., 2009, vol. 30, pp. 3943-3957.10.1016/j.matdes.2009.05.042 ↗
42. N.C.W Kuijpers, J. Tirel, D.N. Hanlon, and S. der Zwaaga: Mater. Charact., 2002, vol. 48, pp. 379-392.10.1016/S1044-5803(02)00289-9 ↗
43. 43.Y.D. Sui, D.P. Ji, L.N. Han, and Q.D. Wang: J. Miner. Met. Mater. Soc., 2019, vol. 71, pp. 366-372.10.1007/s11837-018-3080-0 ↗
44. M. Rashad, FS Pan, W Guo, H Lin, M Asif, M Irfan: Mater. Charact., 2015, vol. 106, pp. 382-389.10.1016/j.matchar.2015.06.033 ↗
45. 45.B.Q. Han, D.C. Dunand: Mater. Sci. Eng. A, 2000, vol. 277, pp. 297-304.10.1016/S0921-5093(99)00074-X ↗
46. 46.W.L.E. Wong, M. Gupta: Compos. Sci. Technol., 2007, vol. 67, pp. 1541-1552.10.1016/j.compscitech.2006.07.015 ↗
47. L. Jiang, H. Yang, J.K. Yee, X. Mo, T. Topping, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2016, vol. 103, pp. 128-140.10.1016/j.actamat.2015.09.057 ↗
48. S.P. Joshi, K.T. Ramesh: Scripta Mater., 2007, vol. 57, pp. 877-880.10.1016/j.scriptamat.2007.06.061 ↗
49. 49.Marsha E. van Dalen, David C. Dunand, and David N. Seidman: Acta Mater., 2005, vol. 53, pp. 4225-4235.10.1016/j.actamat.2005.05.022 ↗
50. Z.H. Zhang, T. Topping, Y. Li, R. Vogt, Y.Z. Zhou, C. Haines, J. Paras, D. Kapoor, J.M. Schoenung, and E.J. Lavernia: Scripta Mater., 2011, vol. 65, pp. 652-655.10.1016/j.scriptamat.2011.06.037 ↗
51. 51.Jae-Gil Jung, Jung-Moo Lee, Young-Hee Cho, and Woon-Ha Yoon: J. Alloys Compd., 2017, vol. 693, pp. 201-210.10.1016/j.jallcom.2016.09.006 ↗
52. 52.Jae-Gil Jung, Sang-Hwa Lee, Young-Hee Cho, Woon-Ha Yoon, Tae-Young Ahn, Yong-Sik Ahn, and Jung-Moo Lee: J. Alloys Compd., 2017, vol. 712, pp. 277-287.10.1016/j.jallcom.2017.04.084 ↗
53. 53.Lina Han, Yudong Sui, Qudong Wang, Kui Wang, and Yehua Jiang: J. Alloys Compd., 2017, vol. 695, pp. 1566-1572.10.1016/j.jallcom.2016.10.300 ↗
54. 54.Lijie Zuo, Bing Ye, Jian Feng, Xiaojing Xu, Xiangyang Kong, and Haiyan Jiang: J. Alloys Compd., 2019, vol. 791, pp. 1015-1024.10.1016/j.jallcom.2019.03.412 ↗
55. 55.Tong Gao, Xiangzhen Zhu, Qianqian Sun, Xiangfa Liu: J. Alloys Compd., 2013, vol. 567, pp. 82-88.10.1016/j.jallcom.2013.03.064 ↗
56. 56.E.R. Wang, X.D. Hui, and G.L. Chen: Mater. Des., 2011, vol. 32, pp. 4333-4340.10.1016/j.matdes.2011.04.005 ↗