journal article·2021-06

Corrosion at the Weld Nugget of the Friction-Stir-Welded Medium Strength Steel: Effect of Microstructure

Murtuja Husain, Lalit Meena, M. Ghosh, N. Prabhu

Publisher page

Abstract

In the present investigation, friction stir welding (FSW) was carried out on C-Mn steel using various welding parameters. The microstructural examination of the weld nugget (WN) region revealed different area fractions of cementite, pearlite, bainite, and martensite within the ferrite matrix. The average hardness in the region of the WN was higher than the base material. The corrosion behavior of the WN and base metal was investigated. The base metal underwent uniform corrosion. Localized pitting corrosion was dominant in the region of the WN. The primary corrosion products were γ-Fe2O3 (maghemite), γ-FeOOH (lepidocrocite), and Fe3O4 (magnetite). The corrosion rate of the WN was significantly higher than that of the base metal. However, the same was considerably lower than the conventionally fusion-welded specimens. Further, the corrosion rate of the WN increased with the increment in the rotational speed of the tool. The change in the corrosion rate at the WN for various specimens was influenced by the matrix grain size, quantity of second phase, area fraction of special boundary, and relative quantity of low- and high-angle grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8 and US Patent Application No. 5, 460, 317, Dec. 1991.
2. 2. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50 (1–2), pp. 1–78.10.1016/j.mser.2005.07.001 ↗
3. 3. W.M. Thomas, P.L. Threadgill, and E.D. Nicholas: Sci. Technol. Weld. Join., 1999, vol. 4, pp. 365–72.10.1179/136217199101538012 ↗
4. 4. H.J. Liu, M. Maeda, H. Fujii, and K. Nogi: J. Mater. Sci. Lett., 2003, vol. 22, pp. 441–44.10.1023/A:1022959627794 ↗
5. 5. S.H.C. Park, Y.S. Sato, and H. Kokawa: Scripta Mater., 2003, vol. 49, pp. 161–66.10.1016/S1359-6462(03)00210-0 ↗
6. 6. H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata, and K. Nogi: Mater. Sci. Eng. A, 2006, vol. 429, pp. 50–57.10.1016/j.msea.2006.04.118 ↗
7. 7. M.M. Husain, R. Sarkar, T.K. Pal, N. Prabhu, and M. Ghosh: J. Mater. Eng. Perform., 2015, vol. 24, pp. 3673–83.10.1007/s11665-015-1652-5 ↗
8. 8. L. Cui, H. Fujii, N. Tsuji, K. Nakata, K. Nogi, R. Ikeda, and M. Matsushita: ISIJ Int., 2007, vol. 47, pp. 299–306.10.2355/isijinternational.47.299 ↗
9. 9. M. Ghosh, M.M. Hussain, and R.K. Gupta: ISIJ Int., 2012, vol. 52, pp. 477–82.10.2355/isijinternational.52.477 ↗
10. 10. D.A. Wadeson, X. Zhou, G.E. Thompson, P. Skeldon, and L. Djapic: Corr. Sci., 2006, vol. 48, pp. 887–97.10.1016/j.corsci.2005.02.020 ↗
11. 11. V. Fahimpour, S.K. Sadrnezhaad, and F. Karimzadeh: Mater. Des., 2012, vol. 39, pp. 329–33.10.1016/j.matdes.2012.02.043 ↗
12. 12. X. Weifeng, L. Jnhe, and Z.H. Hongqiang: Electrochimica Acta., 2010, vol. 55 (8), pp. 2918–23.10.1016/j.electacta.2009.12.083 ↗
13. 13. C.S. Paglia and R.G. Buchheit: Scripta Mater., 2008, vol. 58 (5), pp. 383–87.10.1016/j.scriptamat.2007.10.043 ↗
14. 14. A. Astarita, A. Squillace, A. Scala, and A. Prisco: J. Mater. Eng. Perform., 2012, vol. 21 (8), pp. 1763–71.10.1007/s11665-011-0073-3 ↗
15. 15. S. Ciliberto, A. Astarita, and A. Squillace: Surf. Interf. Analy., 2013, vol. 45 (10), pp. 1631–37.10.1002/sia.5214 ↗
16. 16. J.B. Lumsden, M.W. Mahoney, C.G. Rhodes, and G.A. Pollock: Corrosion, 2003, vol. 59, pp. 212–19.10.5006/1.3277553 ↗
17. Astarita A, Bitondo C, Squillace A, Arentani E, Bellucci F (2013) Surf. Interface Analy. 45(10): 1610–18.10.1002/sia.5234 ↗
18. 18. J.B. Lumsden, M.W. Mahoney, G.A. Pollock, and C.G. Rhodes: Corrosion, 1999, vol. 55 (12), pp. 1127–35.10.5006/1.3283950 ↗
19. 19. W. Hu and E. Meletis: Mater. Sci. Forum., 2000, vols. 331–337, pp. 1683–88.10.4028/www.scientific.net/MSF.331-337.1683 ↗
20. 20. G.S. Frankel and Z. Xia: Corrosion, 1999, vol. 55 (2), pp. 139–50.10.5006/1.3283974 ↗
21. 21. J. Corral, E.A. Trillo, Y. Li, and L.E. Murr: J. Mater. Sci. Lett., 2000, vol. 19, pp. 2117–22.10.1023/A:1026710422951 ↗
22. 22. F. Zucchi, G. Trabanelli, and V. Grassi: Mater. Corr., 2001, vol. 52 (11), pp. 853–59.10.1002/1521-4176(200111)52:11<853::AID-MACO853>3.0.CO;2-1 ↗
23. 23. J.R. Galvele, R.M. Torresi, and R.M. Carranza: Corr. Sci., 1981, vol. 21, pp. 551–79.10.1016/0010-938X(81)90009-3 ↗
24. Standard Guide G48-92, Annual Book of ASTM Standards, ASTM, Philadelphia PA, 1994, p. 652.
25. 25. M.A.M. Ibrahim, S.S.A.E. Rehim, and M.M. Hamza: Mater. Chem. Phys., 2009, vol. 115, pp. 80–85.10.1016/j.matchemphys.2008.11.016 ↗
26. 26. F. Gharavi, K.A. Matori, R. Yunus, and N.K. Othman: Mater. Res., 2014, vol. 17 (3), pp. 672–81.10.1590/S1516-14392014005000053 ↗
27. Z. Chen, S. Li, and L.H. Hihara: Physics, 2015, pp. 1–25.
28. 28. H. Sarlak, M. Atapour, and M. Esmailzadeh: Mater. Des., 2015, vol. 66, pp. 209–16.10.1016/j.matdes.2014.10.060 ↗
29. 29. S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki: Scripta Mater., 2004, vol. 51 (2), pp. 101–05.10.1016/j.scriptamat.2004.04.001 ↗
30. 30. J. Liu and H. Chen: Front. Mater., 2019, vol. 6, pp. 1–8.10.3389/fmats.2019.00001 ↗
31. 31. M. Shamanian, A. Eghlimi, M. Eskandarian, and J.A. Szpunar: Surf. Coat. Technol., 2014, vol. 259, pp. 532–42.10.1016/j.surfcoat.2014.10.034 ↗
32. 32. A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian, and J. A. Szpunar: Mater. Charact., 2015, vol. 106, pp. 208–17.10.1016/j.matchar.2015.05.036 ↗
33. 33. S. Kim and Y. Yoo: Mater. Sci. Eng. A, 2001, vol. 311, pp. 108–13.10.1016/S0921-5093(01)00917-0 ↗
34. 34. D.F. Li, Q.M. Guo, S.L. Guo, H.J. Peng, and Z.G. Wu: Mater. Des., 2011, vol. 32, pp. 696–705.10.1016/j.matdes.2010.07.040 ↗
35. 35. A.M. Wusatowska-Sarnek, H. Miura, and T. Sakai: Mater. Sci. Eng. A, 2002, vol 323, pp. 177–86.10.1016/S0921-5093(01)01336-3 ↗
36. 36. L.H. Chan, H. Weiland, S. Cheong, G.S. Rohrer, and A.D. Rollett: Appl. Text. Anal. Ceram. Trans., 2008, vol. 201, pp. 261–67.
37. 37. F. Gharavi, K.A. Matori, R. Yunus, N.K. Othman, and F. Fadaeifard: J. Mater. Res. Technol., 2015, vol. 4 (3), pp. 314–22.10.1016/j.jmrt.2015.01.007 ↗
38. 38. A. Bhattacharyya, D. Rittel, and G. Ravichandran: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1137–45.10.1007/s11661-006-1092-9 ↗
39. L. Kestens and J.J. Jonas: ASM Handbook, ASM International, Materials Park, OH, 2005, vol. 14A, pp. 685–99.
40. 40. S. Mironov, Y.S. Sato, and H. Kokawa: Acta Mater., 2008, vol. 56, pp. 2602–14.10.1016/j.actamat.2008.01.040 ↗
41. 41. A.P. Reynolds, E. Hood, and W. Tang: Scripta Mater., 2008, vol. 52, pp. 491–94.10.1016/j.scriptamat.2004.11.009 ↗
42. 42. W.T. Han, F.R. Wan, B. Leng, S. Ukai, Q.X. Tang, S. Hayashi, J.C. He, and Y. Sugino: Sci. Technol. Weld. Join., 2013, vol. 16 (8), pp. 690–96.10.1179/1362171811Y.0000000064 ↗
43. 43. R.W. Fonda, K.E. Knipling, and J.F. Bingert: Scripta Mater. 2008, vol. 58, pp. 343–48.10.1016/j.scriptamat.2007.09.063 ↗
44. 44. R. Badji, T. Chauveau, and B. Bacroix: Mater. Sci. Eng. A, 2013, vol. 575, pp. 94–103.10.1016/j.msea.2013.03.018 ↗
45. 45. H. Cho, S.H. Kang, S. Kim, K.H. Oh, H.J. Kim, W. Chang, and H.N. Han: Mater. Des., 2012, vol. 34, pp. 258–67.10.1016/j.matdes.2011.08.010 ↗
46. 46. H. Hallberg, M. Wallin, and M. Ristinma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1126–34.10.1016/j.msea.2009.09.043 ↗
47. 47. A. Ohmori, S. Torizuka, K. Nagai, N. Koseki, and Y. Kogo: Mater. Trans., 2004, vol. 45 (7), pp. 2224–31.10.2320/matertrans.45.2224 ↗
48. 48. O.S. Salih, H. Ou, X. Wei, and W. Sun: Mater. Sci. Eng. A, 2019, vol. 742, pp. 78–88.10.1016/j.msea.2018.10.116 ↗
49. 49. S. Ranganathan: Acta Cryst., 1966, vol. 21, pp. 197–99.10.1107/S0365110X66002615 ↗
50. 50. G. Cai, Y. Pang, Y. Huang, and R.D.K. Misra: ISIJ Int., 2019, vol. 59 (12), pp. 2302–10.10.2355/isijinternational.ISIJINT-2019-248 ↗
51. 51. A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian, M. Nezakat, and J.A. Szpunar: Surf. Coat. Technol., 2015, vol. 264, pp. 150–62.10.1016/j.surfcoat.2014.12.060 ↗
52. Xiao-ying F, Wei-guo W, Hong G, Gxin Z, Bang-xin Z (2007) J. Iron Steel Res 14(5), 339–43.10.1016/S1006-706X(08)60107-7 ↗
53. 53. G. Ma, Q. He, X. Luo, G. Wu, and Q. Chen: Materials, 2019, vol. 12 (1), pp. 1–11.10.3390/ma12010196 ↗
54. 54. M.M. Husain, R. Sarkar, T.K. Pal, M. Ghosh, and N. Prabhu: J. Mater. Eng. Perform., 2017, vol. 26, pp. 2047–56.10.1007/s11665-017-2637-3 ↗
55. E.E. Stansbury and R.A. Buchanan: Introduction and Overview of Electrochemical Corrosion, ASM International, Materials Park, OH, pp. 1–21.
56. 56. S.K. Pradhan, P. Bhuyan, and S. Mandal: Corr. Sci., 2019, vol. 158, pp. 1–13.10.1016/j.corsci.2019.108091 ↗
57. 57. P.D. Bilmes, C.L. Llorente, L.S. Huama, L.M. Gassa, and C.A. Gervasi: Corr. Sci., 2006, vol. 48, pp. 3261–70.10.1016/j.corsci.2005.10.009 ↗
58. 58. C.T. Kwok, H.C. Man, and F.T. Cheng: Surf. Coat. Technol., 2000, vol. 126, pp. 238–55.10.1016/S0257-8972(00)00533-8 ↗
59. A. Grajcar, M. Kciuk, S. Topolska, and A. Płachcinska: J. Mater. Eng. Perform. 2016, vol. 25, pp. 2245–54.10.1007/s11665-016-2085-5 ↗
60. 60. M. Atapour, H. Sarlak, and M. Esmailzadeh: Int. J. Adv. Manuf. Technol., 2016, vol. 83, pp. 721–28.10.1007/s00170-015-7601-5 ↗
61. L.F. Garfias-Mesias: The Effect of Microstructure on the Pitting Resistance of Duplex Stainless Steels, NACE–International Corrosion Conference Series, Jan. 2015, https://www.researchgate.net/publication/282903111.
62. 62. A.S. Hamdy, E. Shenawy, and T. Bitar: Mater. Lett., 2007, vol. 61, pp. 2827–32.10.1016/j.matlet.2006.10.043 ↗
63. 63. A.A. Aghuy, M. Zakeri, M.H. Moayed, and M. Mazinani: Corr. Sci., 2015, vol. 94, pp. 368–76.10.1016/j.corsci.2015.02.024 ↗
64. 64. L. Peguet, B. Malki, and B. Baroux: Corr. Sci., 2009, vol. 51, pp. 493–98.10.1016/j.corsci.2008.12.026 ↗
65. 65. I.M. Ghayad, A.S. Hamada, N.N. Girgis, and W.A. Ghanem: Steel Grips, 2006, vol. 4, pp. 133–37.
66. 66. Y.S. Chun, J.S. Kim, K.T. Park, Y.K. Lee, and C.S. Lee: Mater. Sci. Eng. A, 2012, vol. 533, pp. 87–95.10.1016/j.msea.2011.11.039 ↗
67. ASTM G102-89: Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 1999, vol. 3, p. 416.
68. H.L. Qin, H. Zhang, D.T. Sun, and Q.Y. Zhuang: J. Min. Met. Mater. 2015, vol. 22, pp. 627–38.10.1007/s12613-015-1116-9 ↗
69. 69. P.K. Katiyar, S. Misra, and K. Mondal: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1489–1501.10.1007/s11661-018-5086-1 ↗
70. 70. N.M. Shkatulyak and O.M. Tkachuk: Mater. Sci., 2012, vol. 48 (2), pp. 153–61.10.1007/s11003-012-9485-y ↗
71. C.R. Weinberger, B.L. Boyce, C.C. Battaile: Int. Mats. Rev., 2013, vol. 58 (5), pp. 296–314. https://doi.org/10.1179/1743280412Y.0000000015.10.1179/1743280412Y.0000000015 ↗
72. 72. S.S. Chouthai and K. Elayaperumal: Corr. J., 1976, vol. 11 (1), pp. 40–43.10.1179/bcj.1976.11.1.40 ↗
73. 73. M. Sephton and P.C. Pistorius: Corrosion, 2000, vol. 56 (12) pp. 1272–79.10.5006/1.3280516 ↗
74. 74. A.C. Murariu and N. Plesu: Int. J. Electrochem. Sci., 2015, vol. 10, pp. 10832–846.10.1016/S1452-3981(23)11303-4 ↗
75. 75. N.A.A. Razak and S.S. Ng: J. Mech. Eng. Sci., 2014, vol. 7, pp. 1168–78.10.15282/jmes.7.2014.16.0114 ↗
76. 76. P. Beeharry and B.Y.R. Surnam: Mater. Today: Proc., 2018, vol. 5 (2), Part 2, pp. 7476–85.
77. Sultani KFA, Roubaiy AOA, Duaa AA (2016) Res. J. Recent Sci. 5(5), 7–13.
78. 78. M.H. Hussin and N.A.C. Lah: Int. J. Eng. Adv. Technol., 2020, vol. 9 (3), pp. 667–800.10.35940/ijeat.B2861.029320 ↗
79. J.R. Davis, ed., Corrosion of Weldments. ASM International, Materials Park, OH, 2006, pp. 13–25.10.31399/asm.tb.cw.9781627083393 ↗
80. 80. Y. Yang, G.R. Joshi, and R. Akid: Materials, 2015, vol. 8, pp. 2635–49.10.3390/ma8052635 ↗