Achieving Yield Symmetry in an Extruded Mg-Zn-Y Alloy by More Effective Dispersion of Quasicrystalline i-Phase
Source abstract
Abstract
A better dispersion of quasicrystalline icosahedral i-phase is achieved in a Mg-3 at. pct Zn-0.5 at. pct Y (ZW82) alloy by a process involving two direct extrusions here. It is confirmed by particle size and distribution analysis that the finer distribution of the particles results from breakage and refinement of the larger particles within the matrix. Better particle distribution resulted in full recrystallization, reported in this alloy composition for the first time. Consequently, a tension-compression yield symmetry was achieved even with a relatively large grain size of about 5 μm. A weaker basal texture (maximum intensity 5.283) played an important role in the strengthening. Yield strengths of about 259 MPa in tension and 269 MPa in compression, with large tensile elongation of 28 pct and compressive elongation of about 20 pct, were obtained. Thus, full recrystallization assisted by finer dispersion of icosahedral phase strengthens the alloy against twinning to remove yield asymmetry, even in a relatively larger grain size alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. M.M. Avedesian, H. Baker, ASM Specialty Handbook: Magnesium and Magnesium Alloys (ASM Int. Mater, Park OH, 1999).
2. M. Esmaily, J.E. Svensson, S. Fajardo, N. Birbilis, G.S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, L.G. Johansson, Prog. Mater. Sci. 89, 92–193 (2017)10.1016/j.pmatsci.2017.04.011 ↗
3. A.P. Tsai, A. Niikura, A. Inoue, T. Masumoto, Philos. Mag. Lett. 69, 351–355 (1994)10.1080/09500839408242443 ↗
4. D.H. Bae, S.H. Kim, D.H. Kim, W.T. Kim, Acta Mater. 50, 2343–2356 (2002)10.1016/S1359-6454(02)00067-8 ↗
5. A. Singh, M. Nakamura, M. Watanabe, A. Kato, A.P. Tsai, Scripta Mater. 49, 417–422 (2003)10.1016/S1359-6462(03)00305-1 ↗
6. A. Singh, H. Somekawa, T. Mukai, Scripta Mater. 56, 935–938 (2007)10.1016/j.scriptamat.2007.02.015 ↗
7. A. Muller, G. Garces, P. Perez, P. Adeva, J. Alloys Comp. 443, L1–L5 (2007)10.1016/j.jallcom.2006.10.006 ↗
8. E. Mora, G. Garces, E. Onorbe, P. Perez, P. Adeva, Scripta Mater. 60, 776–779 (2009)10.1016/j.scriptamat.2009.01.012 ↗
9. A. Singh, Y. Osawa, H. Somekawa, T. Mukai, Scripta Mater. 64, 661–664 (2011)10.1016/j.scriptamat.2010.12.016 ↗
10. A. Singh, Y. Osawa, H. Somekawa, T. Mukai, C.J. Parrish, D.S. Shih, Metall. Mater Trans. A 45A, 3232–3240 (2014)10.1007/s11661-013-2056-5 ↗
11. A. Singh, Y. Osawa, H. Somekawa, T. Mukai, Mater. Sci. & Engg. A611, 242–251 (2014)10.1016/j.msea.2014.05.091 ↗
12. T.Y. Kwak, W.J. Kim, Mater. Sci. & Engg. A 684, 284–291 (2017)10.1016/j.msea.2016.12.063 ↗
13. T.Y. Kwak, W.J. Kim, J. Alloys Comp. 770, 589–599 (2019)10.1016/j.jallcom.2018.08.121 ↗
14. T.Y. Kwak, H.K. Lim, W.J. Kim, J. Alloys Compd. 644, 645–653 (2015)10.1016/j.jallcom.2015.04.158 ↗
15. T.Y. Kwak, H.K. Lim, W.J. Kim, J. Alloys Compd. 725, 711–723 (2017)10.1016/j.jallcom.2017.07.164 ↗
16. A. Singh, D.A. Basha, H. Somekawa, K. Tsuchiya, Scripta Materialia 134, 80–84 (2017)10.1016/j.scriptamat.2017.02.039 ↗
17. G. Garces, J. Medina, P. Perez, K. Mathis, K. Horvath, A. Stark, N. Schell, P. Adeva, Acta Mater. 151, 271–281 (2018)10.1016/j.actamat.2018.03.060 ↗
18. K. Tesar, H. Somekawa and A. Singh, J. Alloys Compd. vol. 849, pp. 156340 (11 pp) (2020)10.1016/j.jallcom.2020.156340 ↗
19. J. Schindelin, I. Arganda-Carreras, E. Frise et al., Nat. Methods 9, 676–682 (2012)10.1038/nmeth.2019 ↗
20. C.T. Rueden, J. Schindelin, M.C. Hiner, et al., BMC Bioinformatics, 2017, vol. 18, pp. 529 (26 pp).10.1186/s12859-017-1934-z ↗
21. J. Sauvola, M. Pietikäinen, Pattern Recognition 33, 225–236 (2020)10.1016/S0031-3203(99)00055-2 ↗
22. A.W. Thompson, Metallography 5, 366–369 (1972)10.1016/0026-0800(72)90018-3 ↗
23. H. Somekawa, D.A. Basha, A. Singh, Mater. Sci. Engg. A 746, 162–166 (2019)10.1016/j.msea.2019.01.018 ↗
24. B. Li, M. Liao, Q. Ma, Z. McClelland, Computational. Mater. Sci. 101, 175–180 (2015)10.1016/j.commatsci.2015.01.034 ↗
25. A.M. Jamili, A. Zarei-Hanzaki, H.R. Abedi, P. Minárik, J. Alloys Comp. 798, 158–166 (2019)10.1016/j.jallcom.2019.04.306 ↗
26. V. Gärtnerová, A. Jäger, A. Singh, T. Mukai, J. Alloys Comp. 726, 651–657 (2017)10.1016/j.jallcom.2017.08.032 ↗
27. M.R. Barnett, Z. Keshavarz, A.G. Beer, D. Atwell, Acta Mater. 52, 5093–5103 (2004)10.1016/j.actamat.2004.07.015 ↗
28. F.R.N. Nabarro, Z.S. Basinski, D.B. Holt, Advances in Physics 13, 193–323 (1964)10.1080/00018736400101031 ↗
29. J.A. del Valle, F. Carreno, O.A. Ruano, Acta Mater. 54, 4247–4259 (2006)10.1016/j.actamat.2006.05.018 ↗
30. J.T. Wang, D.L. Yin, J.Q. Liu, J. Tao, Y.L. Su, X. Zhao, Scripta Mater. 59, 63–66 (2008)10.1016/j.scriptamat.2008.02.029 ↗
31. H. Somekawa, T. Mukai, Mater. Sci. Engg. A 561, 378–385 (2013)10.1016/j.msea.2012.10.040 ↗