The Effect of Micro-Segregation on the Quantification of Microstructural Parameters in Grade 91 Steel
Source abstract
Abstract
Abstract The quantification of key microstructural parameters as a function of aging or creep exposure time is commonplace in the assessment of 9Cr Creep Strength Enhanced Ferritic (CSEF) power-plant steels. In these studies, the sample is either assumed chemically homogenous at the micro-scale or that a material average will be achieved by collecting enough images at random locations. In this paper, the micro-scale chemical homogeneity of two ex-service boiler components, a pipe and a forging, are quantitatively assessed using high sensitivity chemical mapping from µ-XRF. The compositional variation was as expected most pronounced in the larger elements Mo and Nb, where a > 20 pct difference in composition was present between positively and negatively segregated areas. The effect of this micro-segregation on local variations in Laves phase particle characteristics was investigated using SEM images. This showed a factor of two difference in the number of particles and the area coverage between positively and negatively Mo-segregated regions. This result was consistent with the thermodynamic equilibrium predictions of the phase content based on the observed level of segregation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 1 R. Viswanathan, K. Coleman, & U. Rao: Int. J. Press. Vessel. Pip., 2006, vol. 83, pp. 778–783.10.1016/j.ijpvp.2006.08.006 ↗
2. J.R. Distefano, V. K. Sikka, J. J. Blass, C. R. Brinkman, J. M. Corum, J. A. Horak, R. L. Huddleston, J. F. King, R. W. McClung and W. K. Sartory: Summary of Modified 9Cr-1Mo Steel Development Program: 1975-1985, 1986, pp 9–287.10.2172/712852 ↗
3. 3 F. Masuyama and J.P. Shingledecker: Procedia Eng., 2013, vol. 55, pp. 314–325.10.1016/j.proeng.2013.03.260 ↗
4. F. Masuyama: Adv. Heat Resist. Steel Power Gener., 1998.
5. T. Fujita: in 3rd Conference on Advances in Material Technology for Fossil Power Plants, 2001, pp. 33–65.
6. ASTM A335/A335M-19a, Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service, ASTM International, West Conshohocken, PA, 2019.
7. ASTM A213/A213M-19a, Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes, ASTM International, West Conshohocken, PA, 2019.
8. ASTM A182/A182M-20, Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service, ASTM International, West Conshohocken, PA, 2020.
9. ASTM A217/A217M-20, Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service, ASTM International, West Conshohocken, PA, 2020.
10. 10 X.Z. Zhang, X.J. Wu, R. Liu, J. Liu, and M.X. Yao: Mater. Sci. Eng. A, 2017, vol. 706, pp. 279–286.10.1016/j.msea.2017.08.111 ↗
11. 11 J. Hald: Int. J. Press. Vessel. Pip., 2008, vol. 85, pp. 30-37.10.1016/j.ijpvp.2007.06.010 ↗
12. 12 C.G. Panait, W. Bendick, A. Fuchsmann, A.F. Gourgues-Lorenzon, and J. Besson: Int. J. Press. Vessel. Pip., 2010, vol. 87, pp. 326–335.10.1016/j.ijpvp.2010.03.017 ↗
13. 13 M. Ortolani and P. Mariani: Mater. High Temp., 2016, vol. 33, pp. 604–608.10.1080/09603409.2016.1201332 ↗
14. 14 M.I. Isik, A. Kostka, and G. Eggeler: Acta Mater., 2014, vol. 81, pp. 230–240.10.1016/j.actamat.2014.08.008 ↗
15. 15 K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, Y. Nagae, and R. Komine: Mater. Sci. Eng. A, 1999, vol. 267, pp. 19-25.10.1016/S0921-5093(99)00066-0 ↗
16. 16 G. Dimmler, P. Weinert, E. Kozeschnik, and H. Cerjak: Mater. Charact., 2003, vol. 51, pp. 341–352.10.1016/j.matchar.2004.02.003 ↗
17. 17 L. Korcakova, J. Hald, and M.A.J. Somers: Mater. Charact., 2001, vol. 47, pp. 111-117.10.1016/S1044-5803(01)00159-0 ↗
18. 18 I. Fedorova, A. Belyakov, P. Kozlov, V. Skorobogatykh, I. Shenkova, and R. Kaibyshev: Mater. Sci. Eng. A, 2014, vol. 615, pp. 153–163.10.1016/j.msea.2014.07.046 ↗
19. J.S. Lee, H. Ghassemi Armaki, K. Maruyama, T. Muraki, and H. Asahi: Mater. Sci. Eng. A, 2006, vol. 428, pp. 270–75.10.1016/j.msea.2006.05.010 ↗
20. 20 Q. Li: Metall. Mater. Trans. A: 2006, vol. 37, pp. 89-97.10.1007/s11661-006-0155-2 ↗
21. 21 P. Hofer, H. Cerjak, B. Schaffernak, and P. Warbichler: Steel Res., 1998, vol. 69, pp. 343-348.10.1002/srin.199805562 ↗
22. 22 K. Sawada, K. Sekido, K. Kimura, K. Arisue, M. Honda, N. Komai, N. Fukuzawa, T. Ueno, N. Shimohata, H. Nakatomi, K. Takagi, T. Kimura, K. Nomura, and K. Kubushiro: Tetsu-To-Hagane/Journal Iron Steel Inst. Japan, 2019, vol. 105, pp. 23–32.10.2355/tetsutohagane.TETSU-2018-066 ↗
23. 23 B. Wang, H. Zhong, X. Li, X. Wang, T. Wu, Q. Liu, and Q. Zhai: Metals (Basel)., 2019, vol. 9. pp. 249-26210.3390/met9020249 ↗
24. M.L. Santella, R.W. Swindeman, R.W. Reed, and J.M. Tanzosh: ASM Proc. Int. Conf. Trends Weld. Res., 2002, pp. 713–18.
25. 25 G. Krauss: Metall. Mater. Trans. B, 2003, vol. 34, pp. 781-792.10.1007/s11663-003-0084-z ↗
26. 26 A. Ghosh: Sadhana - Eng. Sci., 2001, vol. 26, pp. 5-24.10.1007/BF02728476 ↗
27. 27 M.Basirat, T. Shrestha, G.P.Potirniche, I. Charit and K. Rink: Int. J. Plast, 2012, vol. 37, pp.95-107.10.1016/j.ijplas.2012.04.004 ↗
28. 28 F. Wang, C. Davis, and M. Strangwood: Mater. Sci. Technol., 2019, vol. 35, pp. 615-627.
29. 29 D. Zhang and M. Strangwood: Mater. Sci. Technol., 2019, vol. 35, pp. 1337–1346.10.1080/02670836.2019.1624016 ↗
30. S. Zheng, C. Davis, and M. Strangwood: Mater. Charact, 2014, vol. 95, pp. 94–104.10.1016/j.matchar.2014.06.008 ↗
31. 31 C. Slater, A. Mandal, and C. Davis: Metall. Mater. Trans. B, 2019, vol. 50, pp. 1627-1636.10.1007/s11663-019-01603-2 ↗
32. 32 D. Chakrabarti, M. Strangwood, and C. Davis: Metall. Mater. Trans. A, 2009, vol. 40, pp. 780-795.10.1007/s11661-009-9794-4 ↗